Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34

Day 55 - 18/11/19 i still think another 1-2 weeks for this one, getting a jewelers loupe for the beginning of week 9 so i can tell exactly where were at in terms of harvest :) anyone got any thoughts on this little plant? have a look at the photos and videos and let me know in the comments below :) oh and i finally nailed what this strains smell is - tropical hubba bubba gum with cheese :'D Day 59 - 22/11/19 Got my jewelers loupe 2 days ago and ive been having a look at them. its pretty hard to see for a newbie grower. ive looked at harvest guides online and seen pictures of clear, cloudy and amber trichomes. mine look mostly cloudy (60%) and slightly glassy (40%) with barely any ambers. i may be wrong but the reason i think its cloudy is that it looks white against the leaves instead of see through or like glass. so going on this for my first trichome inspection im gonna harvest in the middle of next week. Smell is getting strong enough to stink out a room, still that tropical cheese smell, although its just so pungent it lingers in the rooms after bringing it out of the tent to inspect it. smell isnt a problem if you put it back in the tent and spray some air freshener stuff in the next room. the carbon filter is doing its job exactly as described along with the fan. The fan leaves started to get yellow patches and sugar leaves starting to curl. and a friend thinks its nearing the end of its life. I flushed yesterday and will flush again today to drain out any excess salts and nutes. Thanks for following along. im excited for week 9! Happy Growing!

Wa wa wee wow! 🤩 she’s a beauty 🤩 got not only so tall but so chunky, truly phat 😯 showing colours of purple, frosty nugs as the trichromes cover her in diamonds 💎 she’s going to Be a stoners dream! Grew her solo and she had immense flavour and potency! And she’s showing exactly the same vigor 👌 3 weeks expectancy left on this one but I’ll keep my eyes on her! Stay tuned and if your lucky to pass my diary don’t just look at it, hit that like button that’s free up there! 😉 127 views and not the like to match it lol #haters #smellthat

Week 4 of flower started on 4/25. Did another moderate defoliation on the larger dark green fan leaves to open the canopy up for more light. Hoping to get bigger buds this go round.

Another week done some great growth from most, the white widow looks like it might still be decent but that's the joys with autos you never know, I put the megapots and autopots i snuck in without mentioning on with week 3 feed as I done it today end if week 2 along with tucking some leaves & I've been spraying the insides & outsides of the fabric pots trying to keep the moisture up around them I don't know why my temps are so high in the day I just think I need to go LED to be honest it goes down to 25 past 5pm . Anything you guys think I could do on top? Also the plemonade fell over so i had to stand hsr up again should be no problem

Dropped light hours down to 16 . Topped off nutrient solution with 5.0 ph evened out .removed none chosen phenos to be flowered in separate room no longer tracking those we will only follow the chosen mothers clones i cut clones today as well had the lady friend clean floor with bleach and dawn put clones in ez cloner 32 systems

- I didn't weight wet buds. - The trichomes photos have been taken just before the harvest on buds all over the plant. - The hash ball was a little less than 1cm diameter. - Drying was made at 20°C and around 50% of humidity. - Humidity in jar around 50% on the first day, temperature around 20°C. Veg time : 53 days. Flowering time : 68 days. Total time from seed to harvest : 121 days. Height : 120cm Pot size : 26l

3rd week Ladies doing good ,not many changes Watering every day , humidity is around 35-45 switched the time to 24/7 got some automatics in the tent

Esta semana empiezo con la poda de bajos, y a clonar esos bajos para guardar genética y quedarme la mejor planta del cultivo. en unos días empieza la floración. un saludo compañeros

These ladies did'nt stretched much so far in week 2 but that could be due to the light intensity and distance I had it at in week 1 of the stretch period. This strain is really starting to show signs of that Gassy, Sweet, Creamy smelly that I was looking for and so far these ladies have been a breeze to grow.

Day 43. Girls will get heavy training later today. They grow ... and because of that i had to move 3 Kushes to other tent and i will make separate diary for theirs flowering time. 3 Auto Blue Tooth by Real Gorilla Seeds took theirs place. After todays training i will give them 4-5 days to recover and will send them to flower hopefully on sunday after 24 hours of darkness. Skunks grow bigger plants, than Cheeses, despite theirs quickest germination and obvious lead in first 3 weeks or so ... Day 46. 3 days left to flower, finally made heavy training, way too busy for LST grows... but result is good, girls hopefully will show off in bloom ! Day 47. Girls loved training, 2 more days, 24 hours darkness and tuesday latest flowering starts. Got full feed of Biobizz, feed charts updated. Next feed = water + silica. Happy Growing !!!

I've unshackled the plant by removing the ties I was using for LST. She continues to streach while producing new flowering sites. I've decreased the Nitrogen and increased the Phosphorus and Potassium ratios in the feed. Now watering 2 litres of water every 3/4 days.

420Fastbuds StrawberryGorillaAuto Week 5 What up grow fam. Hopefully everyone had a great 420. These 3 beautiful ladies are growing amazing. Started there transition into flower this past week. So where starting to get some great growth and all in all the plants look super healthy. Happy Growing

**Vegetation Phase - Week 1** The Donutz ladies have officially stepped into their first week of vegetative growth. After a strong start, we’ve gently introduced a small dose of Greenhouse Feeding Bio nutrients to begin supporting early growth. Watering remains minimal, as these young plants aren’t thirsty yet — they’re steadily finding their stride, with roots spreading through the Floragard Growmix soil. **Environment & Care**: - **Water**: Lightly administered reverse osmosis (RO) water keeps things clean and precise. - **Nutrients**: A hint of Greenhouse Feeding Bio fertilizer to nudge growth along without overwhelming. - **Conditions**: Temperature and humidity kept stable for optimal root and shoot development. **Plant Progress**: - All 10 Donutz are healthy and showing strong vigor, with consistent growth. - Leaves are vibrant and lush, indicating proper photosynthesis and nutrient uptake. - We can almost imagine their roots spreading through the rich Floragard soil, exploring and establishing themselves, while above ground, they’re standing strong and ready to keep pushing upward. The sea is calm but promising; each young Donutz is primed to expand and flourish. The tent remains a harmonious environment, setting the stage for an epic SOG canopy. Patience and gentle care continue to be key as they find their rhythm in this new life.

0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH

Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Sweet Seeds, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! Settimana incredibile!!! Grazie a tutti per il supporto ❤️🍀🔥

And the first week of flower begins! I started this week off by defoliating any and all large fan leaves blocking lower nodes. Also did a little supercropping on BL to get her to spread just a bit more. I raised the light up to 45cm and this will be the final height. They've been drinking really fast by this point. Definitely going to be very diligent with waterings/feedings until harvest. Cheers all! This is my most painless grow to date, praying for a nice and smooth wrap-up to this cycle as well.