The plants are looking really healthy, I've been defoliating here and there to get the light to penetrate to the lower leaves and branches. They have started to bush out from topping them last week. I started using Mammoth P Microbes halfway through last week. They seem to have grown a little quicker since adding them. The plants are still being fed 4 times a day at 1 minute each feeding. No signs yet of which is female and male, I am planning on pulling all the males once they show signs.

Xs just killin it out here

Whats up everybody! Since last week the ladies have been switched to a flowering light cycle. I eased them into the schedule over like three days just to give them a more natural transition. They all got most of their mature fan leaves removed from the bottom sections to open yo the bud sites to a little more light and airflow. After about the first day you could already see the new growth coming in and more bud sites starting to form. I also bent the dominant colas on all three plants to give them all more of an even canopy. Cant wait to see these babies start budding! I hope everyone has a Merry Christmas! 🎁🎄

Defoliated almost a week ago and looks like I didn’t even do it. Going to defoliate again at day 21. Pretty happy so far and increasing the intensity of the light to about 80% slowly working to 100% over the next few days

Hello growers day 8 on the balcony with the gorilla glue auto not much to report just trying not to let her fry in this heat just keeping her wet with water at the moI’m going to give her till day 14 then I’ll start to feed her some nutrients until next week be safe and happy growing ✌️🏻

Oye amigos!!! Es la semana dieciocho!! Vamos a ver!! Sunday - Day 120 6 October 24 Watering day, 5 litres of dechlorinated tap water. - Base water 5 litres - 60.4 PPM - Add 5 ml Cal-Max - 294 PPM - Add 5 ml Supermax - 336 PPM Final - 5 litres at 6.46 PH at 337 PPM Runoff - 0.8 litres at 6.48 PH at 1,110 PPM - A few more leaves have fallen off on their own. - This rate of fade is perfect. All those leaves should be used up by the end. Wednesday - Day 123 9 October 24 Watering day, 5 litres of dechlorinated tap water. - Base water 5 litres - 61.1 PPM - Add 5 ml Cal-Max - 258 PPM Final - 5 litres at 6.50 PH at 258 PPM Runoff - 0.6 litres at 6.48 PH at 1,070 PPM - She’s fading a little more. - On track ti’ll the end. Thursday - Day 124 10 October 24 - Just a day under the lights. - Slowly continuing to fade. - All is looking great. - She’s just recently started giving off some really nice odours. Friday - Day 125 11 October 24 - Just a day under the lights. - Few more leaves have fallen off. - We’re doing it!! Saturday - Day 126 12 October 24 Watering day, 5 litres of dechlorinated tap water. - Base water 5 litres - 61.1 PPM - Add 3.75 ml Cal-Max - 210 PPM - Add 1 tsp seaweed extract - 332 PPM Final - 5 litres at 6.41 PH at 345 PPM Runoff - 0.7 litres at 6.21 PH at 1,120 PPM - About an other dozen leaves have fallen off on their own. Well here we are at the end of week eighteen. Definitely nearing the end of this grow. Join us next week to see how she finishes off. Vamos a ver juntos bendejos.

Within 2 weeks she will be ready

The stretch period is considered to be over. I did the last leaf cleaning. I won't touch it anymore. I did super croping because the branches got too long.

Focusing on filling out Scrog this week. Did a good deal of defoliation yesterday to try and eliminate overlapping foliage as well as get light to lower sites. Discovered I haven't been shaking nutes up enough before using so actual nutes amounts before this week are 🤷. Giving the girls a day or two to recover but will likely defoliate a little more at next feeding.

Light schedule 20 hours on 4 hours off and the same with ventilation. Humidity approx 50 percent, water intake raised up 125 ml per plant per day. Fertilization continues on Monday, Wednesday, and Friday with Biobizz family and Tuesday, Thursday, Saturday bat guano and Epsom salt. This week will change that shit lamp and replace with Marshydro 600W. Day 46, 2 days no update all good they are flowering nicely waiting for the new lamp. Critical Orange Punch nicely developing and the rest of them is coming as well. Today I set the new 600W Marshydro. I also set the light schedule for 18/6.

Für das erste mal bin ich zufrieden :-)

Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making their way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying position all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 A little worried today her birth Twin the BA I am growing out is looking great and is raised towards the light and this one is just slightly under.. Will keep an eye on Her. Week 1 Day 5- 8/16/2023 Walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. Also looking at the roots and she has some poking out the bottom but just not in the water yet.. Luckily we are set for 14 days before next water change so the system will stay stable and her sister already has roots in the water so she should only be a day or two behind.. we will just keep tracking but she is delayed. Week 1 Day 6- 8/17/2023 Roots in the Water!!! Huston, we have a successful launch. This grow is on! Humidity was a little low this morning so I refilled the humidifiers. Other than that the temp looks great, the PH looks good, the PPM looks good the plant is in the praying position and all damage from the little drowning from over filling the cloning machine seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started. Everything for growth and environment is looking good and on track, there are a couple of mutations with this Lady will keep an eye on those leaves. IMO this grow is going A lot during this week 1 then week 1 of the last grow when I had them drowning. Really excited on how this grow is going to come out.

Week 10 beginning of the final stages. Smell is amazing 🤩 What would you guys make different?

Hehehe che dire! Pe so che le.foto.si commenti o da sole! L'odore di vaniglia e qualcosa di allucinante! Dopo 14 giorni di lavaggio (10 con flawess finish e 4 solo acqua a 200ppm) ha preso un colore autunnale stupendo! Tra tutte sicuramente salta molto all'occhio....gli ultimi due giorni l'ho lasciata denutrita in modo che capisse che stesse arrivando la sua fine ed oggi ha ricevuto il suo colpo di grazia 😔..... Pulita completamente da ogni tipo di foglia di zucchero il peso complessivo (senza rami e rametti) sono di 334g...molto molto soddisfatto del risultato e del prodotto finale! Pe. Sto che da me adesso fa caldo e non riesco a fare scendere la temperatura di più la sera per darli un colore un po' più violaceo...ma forse era un fenotipo proprio così, ma non mi interessa il colore onesto, l'importante e il risultato finale e sono veramente molto contento! Grazie infinite a fast Buds per l'opportunità che mi dà ogni giorno facendomi coltivare le loro genetiche e spero che questo diario possa essere di aiuto a qualcuno...un altro ringraziamento va sicuramente alla parte più importante del progetto, il pubblico! Tutti voi in parte avete contribuito a ciò motivandomi con i vostri commenti e like! Ringrazio infinitamente tutti quanti di cuore! Ciao a tutti al prossimo progetto! ( A breve💪🏼) 🌱🍄🌈

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Took a while to get there but OMG little note quick! So I started her in a 1 litre pot and stuck her on top of a 1.5L Pepsi bottle with the top chopped off! And she yielded heavily for that amount of soil a whopping! 224.63 wet weight so can’t wait to see what she holds dry because them buds were like boulders! So dense! I will be back to document her dry weight and then a couple of weeks later with the update on the smoke report! But I know it’s going to be so loud! She has deep pungent aromas like gassy and sweet! She’s going to be a powerhouse! She was a little over as today a banana developed but that just tells me “well done” timing just right! She’s a little long for my taste of auto but I do suggest anyone grow her she’s amazing! In the end!

Tag 39: Heute habe ich an alle Seitenarme Holzspieße befestigt. Befestigt habe ich diese mit kleinen Stücken Softdraht die Arme werden zusätzlich noch durch den Softdraht unten bzw. Vorerst in der Waagerechten gehalten(gezogen). Ich muss noch schauen wie ich die noch tiefer ziehe um eine optimale Lichtausbeute zu erreichen. Es ist also noch einiges an Geduld und Grübeln angesagt. Tag 40: Die Cookie Gelato ist etwas zu trocken geworden, das ging so schnell ich hatte sie erst vor 2 Tagen gegossen davor alle 3. Die Blätter hängen schon, das LST hat sicher auch dazu beigetragen 😬 ich hoffe sie erholt sich. Tag 41: Sie ist noch nicht aus dem gröbsten raus, so ein Mist. Das Wetter ist auch wieder so wechselhaft, ständig versuche ich den Schwankungen entgegen zu wirken, doch es gelingt mich nicht immer 😫

i accidently bought some unbuffered coco and mixed it with my ussual earth, had major calmag problems in mid-flower but i´m still pleased with the results...also had a little trouble with mold at the end due to bad weather and high humidity in the final weeks of the grow, had to remove a few buds and harvest early @ day 55 of flower....but there's still alot of great looking buds left for me to enjoy and all look mostly done... Just harvested and hung them upside down, currently drying them at constant 19.5-20.5°C and 50-60% RH..will update as soon as they are dry

In the beginning of the week she was standing a bit crooked. I will be mainlining soon and I want her central stem to be strong. So I tied her stem to a chop-stick to do a bit of low stress training prior to topping her. Also hit the hydro store and picked up some Fishsh!t and Recharge. Added that, worm castings and some Down to Earth dry amendments to brew up a compost tea. Gave her a big sip on 3/4.