Recommended
Likes
Comments
Share
its day 35 since sproud and surag black rose is looking very good. grows the fastest looks the healthiest. Also trained her with the bending clips to make the branches stronger. I collected leave mold from the surrounding woods. a lot of white fungy hopefully usefull mycoriza.
Processing
Likes
13
Share
@Xelxz
Follow
ºDay 52 (29Dez) - Took LST on some colas, 3rd video, 15th watering (3rd vegNute); ºDay 56 (02Jan) - Took all the LST, letting her grow; ºDay 56 (02Jan) - 4th video, end of week 8;
Likes
43
Share
~ GG4 SHERBET FAST FLOWER by FastBuds ~ Well fam, here we go again with another epic strain from FastBuds Fast Flowering stable. After having such tremendous success growing their Gorilla Cookies Fast Flower outdoors last year, I've decided to run another of their fast flowering strains outdoors this year... GG4 Sherbet Fast Flower! The best description of this awesome cultivar comes directly from my friends at FastBuds which is as follows: "Bred from extremely potent and flavorful Gorilla Glue and Orange Sherbet genetics, GG4 Sherbet FF (Fast-Flowering) takes all the best traits to the next level, offering a high-yielding strain that can produce up to 600 g/m2 in a 7-week flowering time. This super resilient Indica-leaning hybrid thrives indoors and outdoors, and in all types of climates while producing mouth-watering sweet, fruity, spicy and earthy terps that translate into a delicious sugary hazelnut aroma. Expect an extremely relaxing and overall happy effect that’ll leave you with a huge smile from ear to ear. It’s the perfect strain for growers of all levels of experience seeking low-maintenance yet highly productive photoperiod varieties that deliver quality and quantity without extra effort. GG4 Sherbet FF grows chunky buds with long dark orange hairs and spade-shaped calyxes that get encrusted with trichomes by harvest time, giving them a gorgeous silvery-white appearance. This medium-sized photoperiod can reach up to 200 cm in height and yields up to 650 g/m2 while developing that typical hybrid structure. GG4 Sherbet FF grows with a stocky, bushy appearance, developing one sturdy main cola and fat side branches that support huge yields without much effort. This super-fast variety produces distinctive light-green buds with a high bud-to-leaf ratio, making your trimming sessions a breeze. It’s a top-notch resin producer that doesn’t need much maintenance and will thrive in almost every climate, rewarding growers of all levels with extremely flavorful resin that makes for outstanding hash end extracts." ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: This is going to be an outdoor grow, but I have started the GG4 Sherbet Fast Flower indoors as our weather is still too cold to put her outside (nighttime temp's dipping regularly into the 30's℉). The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures stay above the mid 40's℉, at which point she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes, and then let the fun begin!🤪💚 ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 5/9- Week Six for the FastBuds GG4 Sherbet Fast Flower and she is doing great! Our weather, so far, has been rather cool and damp. We've had showers on and off every 2-3 days which has taken care of my watering chores which I won't complain about. 5/11- I'm continuing to monitor the leaf damage and am keeping up with the Neem Oil applications to mitigate as much further damage as possible. I still have yet to put eyes on the culprits responsible for the damage to the leaves. Tomorrow I'm going to top dress the GG4 Sherbet for the first time since transplanting outside into her pre-amended soil mix. 5/13- Yesterday, I top dressed the GG4 Sherbet FF with 2 cups of Gaia Green 4-4-4 All Purpose and 1/2g of worm castings. After top dressing and working the amendments into the soil, I watered them in via garden hose with well water. 5/15- There's six weeks of veg for the FastBuds GG4 Sherbet Fast Flower and, with our weather finally cooperating, she's beginning to really take off! I can't wait to see what she'll do over the course of the next few weeks... should be exciting! Thank you for checking out my diary.
Processing
Likes
4
Share
Likes
209
Share
@BioBuds
Follow
They are going slow but steady. Holding back on watering to help fight the gnats. They were with too many last week. Some yellow points because of an 'on the limit' foliar feed. Nothing to worry about. Still very lush greens. I'm thinking the main reason for their slower growth, is the fan that is on high. My mission from the start s to get thick stalks and branches, to facilitate larger buds. Also, I'm pushing the SP 3000 to its max for the age of my plants, they don't have to reach for the light, resulting in shorter, bushier plants. I don't mind, I think the flowering stretch will make up for that and fill the tent. Still very happy with the SP-3000 from Mars Hydro, a much more constant and manageable climate in the tent, a dream to work with. I made a thank you video for @MarsHydroLED, of course, to also show off my music. I'm thinking one or two more weeks before resetting the light schedule for flowering. I'm already late and if another week will deliver bigger and more buds, I will give them what they need. For those living in Europe, wanting to try super soil, see my recipe in the images. Thank you for following and your likes and support! It really keeps me motivated. Big Hug Bud
Likes
11
Share
Shaping up nicely with LST. Minor defoliation to remove unwanted growth sites. Down to 7 main colas, let’s get them fat. She will wake up in flower tent tomorrow. Check out my planet of the grapes auto diary for sprout in back of tent. Video/photos taken 49 days after breaking soil.
Likes
8
Share
@DoMoNe
Follow
Following https://www.royalqueenseeds.com/blog-how-to-grow-autoflowering-cannabis-n83 "WEEK 9: THE FINISH LINE APPROACHES" #57 10.5. - #63 16.5. #57 10.5. -Watered with 1,5liters/pot #58 11.5. -nothing done today #59 12.5. -its been VERYwarm (on our standards) today, so tent temp gone up to 32degrees, ill have to and open up the side vent clearly #60 13.5. -temps still too warm. #61 14.5. -watered/flushed #62 15.5. -nothing done yet #63 16.5. -watered/flushed
Likes
11
Share
@Goltala
Follow
Germination week has begun for my Autumn 2021 grow! These are seeds of Mephisto Genetics Deep Blue C x Sour Bubbly that I was given by the widow of my recently passed fellow grower buddy, Adam. I'm honoured to keep this hobby of ours alive and what better way than to use seeds Adam was growing himself. I've been using this germination technique lately of just placing the bean in the little containers seeds come in sometimes (as pictured) filled with some water. I've had 100% success so far usually after 2 days or so. Hope I didn't just jinx it! Update: I was away and didn't take the seeds out in time, left them in water for nearly 48 hrs. My fault. Out of 5 seeds, 3 visibly damped off. Planted the 2 seeds with healthy taproots into soil to grow some before transplant.
Likes
24
Share
@Spazmagi
Follow
11/3 - Today is technically the first day of Week 5 and also the first day I could see a visible drop in her water level since her last check-in (~12 hours apart). As a result, her ppms shot up to around 800. I diluted the solution with straight tap (7.5pH, 170ppm) since her pH was registering around 5.3. This brought her up to 5.6pH and 670ppm (1.0ec + tap, 500ppm of nutrients). I would have liked to adjust her pH more, but the water level ended up at the bottom of the basket. I'll adjust further as necessary. The other day while attempting to LST her top branches, they ended up snapping off, so I just topped her down one node and broadened her other LST to make her as squat as possible. Once I am able to find a suitable individual ScrOG screen, I will put it on her. 11/4 - I wasn't even planning on doing an update today, but I want to note a few changes. The first of which is a visible difference between her foliage density in a span of 36 hours. Her root bundle is over a foot long and getting more wound up every day. I removed her LST ties in order to take advantage of the ScrOG screen apparatus (see notes below). After lights came back on, she measured 645ppm and had another notable drop in water level. Currently, I am preparing another nutrient solution that closely matches what she is feeding on now. I will be upgrading her to a 5 gallon bucket. I will be aiming for 1ec of nutrients/additives (500ppm + Tap on my meter, Hanna Primo .5 conversion). Tap measured 180ppm, so target ppm would be 680. Later that same day... So I finished upgrading her to a 5 gallon bucket before I actually got done writing the update. Added one photo showing new 5 gallon setup. Solo ScrOG test mk1 - In an attempt to do a ScrOG, but maintain control over each bucket, while still having relatively easy access to each reservoir, I decided to throw together this little contraption. I removed the lowest complete segment of a tomato cage, leaving a short "tail" beyond the lower ring to act as a peg to insert into corresponding holes in the lid. The lower ring is 10" in diameter and the upper is approximately 12" in diameter. Each ring is 11" apart. I would prefer to have a shorter segment, but I haven't worked out exactly how to do this yet. I would prefer to set the screen height at around 6" above the bucket instead of 11". This will have to suffice for the time being while I let my latent conscious work out a solution or one is provided by the community. Above each cage will sit a coated wire fence with grids measuring ~2"x3", as shown in the above picture. 11/5 - Uploaded short video showing Solo ScrOG Apparatus in place. Screen height currently set to 6". Thanks for stopping by my garden, and, as always, Happy Growing!
Likes
1
Share
Week 6! September 9 -Yo! Everything was all good just a week ago smh. Been battling what I think is a magnesium deficiency as I waited for dry back 3 days just in case and it’s gotten worse. -Since it’s early flower I’m thing Mag deficiency so CalMag every watering or every other until I see this stop affecting my fan leaves -Other than an obvious deficiency ladies are still producing trichomes and the flowerings are still growing. Will continue to pH the water and monitor the health of these two ladies this week
Likes
133
Share
@PapaNugs
Follow
Great week inside this tent. The girl got her topping and then recovered over the week. There were already some good side branching and now they are being trained even more. Flipping to flower now. Lights at 40% power. Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.woodroom.tel/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/
Likes
18
Share
Yellow butterfly came to see me the other day; that was nice. Starting to show signs of stress on the odd leaf, localized isolated blips, blemishes, who said growing up was going to be easy! Smaller leaves have less surface area for stomata to occupy, so the stomata are packed more densely to maintain adequate gas exchange. Smaller leaves might have higher stomatal density to compensate for their smaller size, potentially maximizing carbon uptake and minimizing water loss. Environmental conditions like light intensity and water availability can influence stomatal density, and these factors can affect leaf size as well. Leaf development involves cell division and expansion, and stomatal differentiation is sensitive to these processes. In essence, the smaller leaf size can lead to a higher stomatal density due to the constraints of available space and the need to optimize gas exchange for photosynthesis and transpiration. In the long term, UV-B radiation can lead to more complex changes in stomatal morphology, including effects on both stomatal density and size, potentially impacting carbon sequestration and water use. In essence, UV-B can be a double-edged sword for stomata: It can induce stomatal closure and potentially reduce stomatal size, but it may also trigger an increase in stomatal density as a compensatory mechanism. It is generally more efficient for gas exchange to have smaller leaves with a higher stomatal density, rather than large leaves with lower stomatal density. This is because smaller stomata can facilitate faster gas exchange due to shorter diffusion pathways, even though they may have the same total pore area as fewer, larger stomata. Leaf size tends to decrease in colder climates to reduce heat loss, while larger leaves are more common in warmer, humid environments. Plants in arid regions often develop smaller leaves with a thicker cuticle and/or hairs to minimize water loss through transpiration. Conversely, plants in wet environments may have larger leaves and drip tips to facilitate water runoff. Leaf size and shape can vary based on light availability. For example, leaves in shaded areas may be larger and thinner to maximize light absorption. Leaf mass per area (LMA) can be higher in stressful environments with limited nutrients, indicating a greater investment in structural components for protection and critical resource conservation. Wind speed, humidity, and soil conditions can also influence leaf morphology, leading to variations in leaf shape, size, and surface characteristics. Small leaves: Reduce water loss in arid or cold climates. Large leaves: Maximize light capture in sunny, humid environments. Hairy leaves: Reduce water loss and protect against excessive sunlight. Lobed leaves: May enhance hydraulic conductivity and cooling. Drip tips: Facilitate water drainage from leaves in wet environments. Thick, waxy leaves: Reduce water loss in dry conditions. Environmental conditions significantly affect gene expression in plants. Plants are sessile organisms, meaning they cannot move to escape unfavorable conditions, so they rely on gene expression to adapt to their surroundings. Environmental factors like light, temperature, water, and nutrient availability can trigger changes in gene expression, allowing plants to respond to and survive in diverse environments. Depending on the environment a young seedling encounters, the developmental program following seed germination could be skotomorphogenesis in the dark or photomorphogenesis in the light. Light signals are interpreted by a repertoire of photoreceptors followed by sophisticated gene expression networks, eventually resulting in developmental changes. The expression and functions of photoreceptors and key signaling molecules are highly coordinated and regulated at multiple levels of the central dogma in molecular biology. Light activates gene expression through the actions of positive transcriptional regulators and the relaxation of chromatin by histone acetylation. Small regulatory RNAs help attenuate the expression of light-responsive genes. Alternative splicing, protein phosphorylation/dephosphorylation, the formation of diverse transcriptional complexes, and selective protein degradation all contribute to proteome diversity and change the functions of individual proteins. Photomorphogenesis, the light-driven developmental changes in plants, significantly impacts gene expression. It involves a cascade of events where light signals, perceived by photoreceptors, trigger changes in gene expression patterns, ultimately leading to the development of a plant in response to its light environment. Genes are expressed, not dictated! While having the potential to encode proteins, genes are not automatically and constantly active. Instead, their expression (the process of turning them into proteins) is carefully regulated by the cell, responding to internal and external signals. This means that genes can be "turned on" or "turned off," and the level of expression can be adjusted, depending on the cell's needs and the surrounding environment. In plants, genes are not simply "on" or "off" but rather their expression is carefully regulated based on various factors, including the cell type, developmental stage, and environmental conditions. This means that while all cells in a plant contain the same genetic information (the same genes), different cells will express different subsets of those genes at different times. This regulation is crucial for the proper functioning and development of the plant. Thoughts, words, actions.
Likes
10
Share
This week was really great except for some weather problem, cold is came a little bit earlier and i m still fixing something in the grow box. Roots are really large and strenght. Flowering started exactly in the 28 day. Let's go!
Likes
103
Share
_____ Week 11 | Day 78 - 85 | 4th week of Flower ______ Day 78 & 79🌞 - What should I write... Not much has happened, I leave the plants alone. - I put my dehumidifier in the tent this week, it starts as soon as the LF rises above 60%. At the moment it is winter with me and the humidity is very low anyway, saves energy Day 80 🌞💧 - each plant 3 liter Day 83 🌞💧 - at the end of week 4 I provided them with nutrients again. They have become thirstier and now drink 3 liters every 3 days ____________________________________________________________________________________________ Light - 12/12 h - 560 Watt - 2x 200 Watt Toplight - 4 x 40 Watt Lightbars PPFD - 900 - 1000 µmol Temp. avg. - 24,4° Hum. avg. - 58 % RLH
Likes
9
Share
Die buds werden dicker und fester Die pflanze verliert weiter ihre Blätter
Likes
2
Share
I feel like the overall cycle length of this is a lot longer than stated. They have been growing for nearly 15 weeks. I believe they could have done with an extra week but we needed the space to add other clones that were ready.
Likes
21
Share
First week went perfectly. Environment stable, good growth for first week. Co2 going in tomorrow and a humidifier going in as well.
Likes
Comments
Share
After topping and now warmer days, the Permanent Marker rises Back Up and started the Turbo.
Likes
57
Share
High GD community, Week 14, She is starting to stretch, not as much as the runtz, but also a nice short(3cm) internodal spacing. 1 feeding this week with bokashi juice, honey and molasses. Thats it for this week boys and girls, Thanks for reading and passing by and 💚💚💚👏👏👏👍👍👍 for Marshydro leds. Quality/price top! Grow safe buds and feel free to check out my other ladies doing fine thanks! 🙏🌿🌿🌿🙏 Weedseedsexpress!!!! 👏👏👏 LarfxWSE for discount at weedseedsexpress!!! 15% off!!! Zamnesia!!! 👽👽👽 Add OrganicLarF as a code when buying your own MarsHydro LED light and get a nice reduction!!!👽🚀🛸