Been a smooth week for the most part. Started them on some armor si and humic/fulvic acid. I thought the twisted helix had a root issue but after watching the growth there is a genetic issue with this this plant. The branches are growing abnormal and she is not happy. I will probably be switching them to flower at the end of week 4 and I have a sour sorbet that will be making an appearance when I flip them to flower. She has been vegging in a different room for about 6 weeks. I will be doing a little training throughout next week to get them spread out.

Fantastic run!!!! Lots of fun BeLeaf cultivars ROCK!!!

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Well harvest day is here, there was so many problems but we got it to harvest and have ended up with some great smoking buds to see us through till the next crop.... thanks again to DankLandDownUnder for sticking by with his help and also helping me plan the next grow...

Very happy with 100% germination rate! They all popped within 36h then put into 70% happy frog soil 30% perlite

#1 hatte 1 Woche länger gestrecht und wird auch generell 1 Woche länger brauchen als #2. Schauen aber beide gut aus! Ich bin sehr zufrieden, wirklich ein toller Strain #1 hat ein bisschen erdigere terps aber mit viel frischer Zitrone.. erinnert mich an die guava von Fastbuds #2 hat sehr süße Zitronenterps welche schon fast den Aktivkohlefilter an seine Leistungsgrenze bringen

Hello to my growmies, friends and visitors 👋👋👋 This was a happy week for me and the Blue Cheese, the plant has grown a ton, and finally started producing normal looking leaves :D The plant branches lovely with a little LST and under the bright Mars Hydro TS 1000 lamp which is set on 70 watt and kept about 27 cm from the plants, both of the plants look really happy under the Mars Hydro TS 1000 lamp :) I wanna thank Mars Hydro again for supplying me with this excellent equipment 😇😇😇 That is all for this week friends, growers and my grower friends...hopefully will see each other diaries next week... Bless, bless, bless 🙌🙌🙌

This plant has really started taking off this week. Lots of pistil production going on. Feeding with med man brand nutes. Kind bud base at 600 ppm, now switching from kick to bloom. Still at half a gram per l of water

Plants doing all well, few more weeks to go

I hit it with some boost one last time then 4 or 5 days later hit it with carboflush the colors are insane since i hooked up the air conditioner,im hoping for a good amount of head smoke .. ✌️✌️✌️

Got pretty hot in the afternoons when ac crapped out finished outdoors for the last 2 weeks Hang dryed for 7 days at 60°60% now bagged

Growing's been good this week she transitioned to the outside very nicely very easily with little to no stress! She been super easy to this point

Start of week 8,flowering, looking for amber trickomes,took off a branch at day 52, trickomes,were mostly milky some clear. I want to know the sweet spot for this girl if you know what I mean. I will post other pics of early cut latter. Also I switched to blue spectrum light only, supposedly it gets more UV light and packs on more resin(higher T H C ) ,Not that it needs more, but in the name of science I am willing to put in the extra effort. 🔎😎

37 days since my little girl sprouted from a seed🌱 Sixth week of growing my Lemon Oasis Auto 🍋🍋🍋 Nutrients: I use Advanced Hydroponics Of Holland nutrients - three basic components, always according to the table for vegetative growth 💓 - - Dutch Formula 1 Grow - supplies the plant with substances necessary for the perfect development of roots, stem and leaves; intended for the growth phase 🌾 - Dutch Formula 2 Bloom - contains a large amount of nutrients needed for rapid growth and development of fruits, provides energy to the plant; intended for the flower phase 🌸🌿 - Dutch Formula 3 Micro - increases oxygen intake, improves plant immunity, ensures better absorption of nutrients; intended for the growth and flowering phase 🌴 -------------------------------------------------- -------------------------------------------------- -------- BioBizz Calmag - The special Calmag supplement was designed for professional and hobby growers who need to supply calcium and magnesium in organic quality to plants for a long time or immediately. 100% organic 💩💩 and certified BioBizz Calmag product is made from calcium carbonate and magnesium sulfate supplemented with humic acid. -------------------------------------------------- -------------------------------------------------- -------- BioBizz Bio pH- is an organic pH regulator. Aqueous solution of citric acid, which occurs naturally in citrus fruits 🍋🍋 -------------------------------------------------- -------------------------------------------------- ------- During the flowering period, I add Advanced Nutrients stimulators: - Bud Ignitor (first two weeks of flowering) - flower stimulator 🌸🏵️ I stopped giving it now - Bud Candy - carbs for my girls 🍭🍭🍭 - JUNGLE - ENVIRON X is a highly effective complex product stimulate the formation of flowers. Contains no synthetic growth regulators (PGRs). • multiplies yield and increases product quality In general: Lemon Oasis Auto 🍋🍋🍋 - My tallest and most mature girl in my tent. On the sides of the main "stick" grew two long legs (one of which is about 15 cm), full of female sexual characteristics - simply an Alpha female 😁 Otherwise, the girl is growing beautifully, has regular internodes, looks optimal for her age🍃💚 Training: During this period, I usually do another defoliation and LST 💚🌞🌞 Light: Mars Hydro TS1000 The plants react effectively and the light is technically very well managed - I try to have 50cm between the light and the plants, so I move it up regularly 💡💡💡 See you soon 😍💚

Germination Week ~ it all started Sunday 9/26/21! Took the 5 Fastbuds Wedding Cheesecake Autos and placed them in a paper towel added a little bit of water then placed in a sandwich baggy, do not zip it closed, leave open it needs to breath and store in a dark room temp place ! Check once in a while make sure paper towel is still moist let it sit !! 9/28/21 The 5 Wedding Cheesecakes popped and were ready to be moved to permanent home! 3gallon AC Infinity bags for each of mine filled up with Fox Farms Ocean Forest to became their home sweet homes! 😍 Today Friday ~ 10/1/21 All 5 Wedding Cheesecakes have popped up in the soil! 😍 My HLG Scorpion Rspec is set at 51 1/2 inches to the floor at 3 clicks or 30% power , and 200-214 par ! What a great Successful Germination week it’s been , stay tuned for next week for week 1 of veg ! Have a great safe weekend, Peace, love an positive vibes to y’all Cheers

Day 4 - training most GP2 GP1 has stiff stems already.....

Week 9 Didn’t do anything this week except water the lady’s. My telescopes batteries died so I can’t take pics of the tricomes. Rest assured they are nice as hell. They are a massive mix of colour. You see purple, cloudy yellow and amber. Super excited to puff on these nugs!!

Nothing special, everything is actually working. Clearly once my water was at the right temperature, no more worries. The flowers arrived at 12/12 + 11 with the trichromes that pop, it starts to be pleasant! So of course, I'm not going to break any records on this RUN but in any case, I've eliminated a lot of "novelty" and mistakes that I'll make more. I'm counting on the run I'm re-launching to blow all that up, I'm going to go for a performance goal The stretch is off to a good start, it should settle down around 12/12 +21 - 28, so I will place my second net next week. I have done a defoliation. I change the soup in 2 days, so my solution lasts 10 days. I have a slight over-fattening, but really nothing serious, I will switch to an EC of 1.8 - 1.9 instead of 2.0. and I will observe. Here we can see the delay of one of the plants, it's as if I was shooting with only 3 plants. Next time, only one strain, same size of cuttings and passage by cuttings and RDWV DIY mandatory before passage in the V-system. Next week, I change the brand of fertilizer for the RDWC, I go to Athena, I will introduce the PK of Athena which according to their recommendation starts at the 21st day at a rate of 2ML/L. I turn with the base sensi bloom a and b + athena pk Otherwise, I receive the parts this week for my RDWC DIY system for growth, I'll make it with my friend and I'll test it and I'll give you a feedback on the next update, especially since I'm going to restart right away, I'm going to do 10-15 days in cuttings and then I'll go to the RDWC DIY system for growth until I finish the FLO of the V-SYTEM and then I'll go straight to the next one. I'm going to put my LEDS at 80% which is the MAX recommendation of SANlight without c0² ( I don't forbid myself to grow at 100% in week 5-6, I'll see... )