when flushing i accidentally ripped a little bud of one side stem. i kept and dried it about 4 days... it smells like cookies and already has some strong medical effects. i am pretty surprised, how well this one turned out. now i can't wait to try the clean, flushed, cured flowers 💚

In week 6 my HOMEBOX growtent has filled up so much, that I need to defoliate the plants. I take them out one by one and take off all lower branches (that dont get enough light) and all leaves of the lower part of the plant. I also take off most of the bigger fan-leaves of the top part of each plant, so the light can penetrate deeper into the canopy. I also add stakes and a plant-holder-ring to each pot, so the bigger plants are supported for better growth. You can see the difference in the BEFORE AND AFTER pics above. Two PURPS-plants from BC-BUD-Depot turned out to be male and have been discarded. Into one of the empty spots I put a small plant of BLUE MINT from Mountain High Seeds as replacement. The other spot stays empty. I simply put a tray into the open spot, so the water is not in the light and no algea grows in my autopot system. The watering via the Flexitank-reservoir works very well. Once a week I fill the reservoir with water mixed with BIO NOVA nutrients, following the SOIL-CULTIVATION schedule of BIO NOVA. Since the EC of my tap water is very high (comes out with EC=1,0 already) I can only add a lower amount of nutrients, therefore I use the BIO NOVA schedule at HALF strength. My babies LOVE the light from the EVO4-120 LED-fixtures from SANlight, they THRIVE under it! At this stage my two lamps are dimmed to 80% (=two green lights are ON, on the dimmer at side of lamp) and hang at a distance of 30 cm from the top of the plants. Now after the defoliation the airflow through the tent is much better and the light can also get to the lower parts of the plant. This way the flowering can continue with an enhanced grow of the buds.

Excited for my first Sweet Seeds run. Amazed I’ve had these seeds for almost a year now and literally jus popped them in the soil right from the pack. Lightly watered and cup misted with water on top. Took 3 days to break the medium. Only way to go is up from here!!! My first official grow All comments welcomed HELP ME!!!!!! Lmao

Starting off the 5th week of flower. Buds seem to be filling out well. Day32F - some minor trimming of larger leaves blocking bus sites. Watering 2L about every 3 days. Wish I could lift the pots. Add recharge about once a week. Final feeding will be Gaia green 284 bloom treating the plants as 2 or 2.5 gallon rather than 5 since pots are over sized. maybe add some high phos bat guano and a little worm casting and kelp. All top dressed

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

😁🇨🇵💪👌🌱

Blüten werden inzwischen sehr Harzig und der Duft nimmt zu. Dem Giesswasser wird täglich 1:10 Jauche zugegen. Zu dem jedes zweite Gießen Pro Sugar von Grow Pro ein Kohlenhydrat Blütedünger(von der Mary Jane ein Tester). Zu dem gibt es ein bis zweimal in der Woche Seafeed Xtra von envii. Die ersten Blätter haben sich unten entfernt daher gebe ich gerade wieder Stickstoff zu den Pflanzen. Auch wenn es nur noch diese Woche war danach nur noch Blütedünger. Zu dem habe ich Basilikum gepflanzt, Dill, Ringelblume und Koriander gesäat am Anfang der Woche und zum Ende noch Lupine und Rot Klee.

Hallo zusammen 🤙. Habe die Lampe auf 50% gestellt hoffe das es klappt. Sie wächst immer weiter 🤙😀 habe sie etwas runter gezogen damit sie nicht direkt an der Lampe ist.

Not sure if I did this LST training correctly, we’ll see. I’ve been following the fox farms 12 nutrient chart religiously along with their mackerel and Kelp me and they seem to be enjoying it. I’m noticing more yellowing than I’d prefer so I ordered some cal mag on Amazon which should be arriving soon.

Nach der Entlaubung letzter Woche haben sich die Pflanzen gut erholt und im Netz entfalten lassen. Die Blütenansätze sind nun deutlich sichtbar. Der Geruch ist moderat und die Temperatur und Luftfeuchtigkeit konstant. Bin gespannt wie groß die so werden. Ist mein erster Grow von Photoperiodischen Pflanzen.

Keep getting bigger! The bag seeds have gotten very stretchy and tall/skinny. A couple of the Northern Lights and GDPs have also gotten some very tall colas. The CO2 canister tapped out after about a week and a half instead of two. These things are a pretty big ripoff really. Replaced the contents with alcohol ingredients (fermenting yeast and sugar water to create CO2) until my mushroom bag gets here. Changing the canister caused it to fall and break a bag seed. Taped the splits, so far seem to be recovering fine. Had to take a small branch off, but made it into a little clone to turn into a cannabonsai.

Flowering day 19 since the time change to 12/12. Hey all together 😀. This week she has developed beautifully ☺️. I poured it 3 times with 1.2 l this week. Tomorrow I will add the 2 g GHSC Powder Feeding Bio Bloom because the first blossoms are coming :-). I checked all the leaves thoroughly for pests or diseases and everything is fine ☺️. Next week I'll look at your roots as soon as the coconut is completely rooted. As every week, the tent was cleaned and the entire technology checked. The humidifier was also refilled every day 👍. In the next few days I will remove the bottom shoots so that the energy doesn't end up being wasted in the small popcorn buds. I wish you a lot of fun with the update. Stay healthy 🙏🏻 and let it grow 🍀 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Woot woot hear we go!! The buds almost double size since Monday Orher than a little slow they are Perfeckt structure for indoor with great yield!

We added a 300w unit farm light for the girls hopefully they don't get to upset in the shift.

zickig aber läuft

🌱: the mild deficiency symptoms grow out slowly, Trichomes are developping 💧 : 2l, 10l SIP 💡 : Dli: 45 mol/m²/d, 🤔:

Week5 March 1st day 30 I transplanted one( the one with no broken branch) inti the 7gal today watered and did some LST I really hope it adapts to its new home I’ve never transplanted before I used extreme garden MYCOS hope it works also moved the light up a bit and plan on going 100% once I transplant the other one March 2nd transplanted the other one (broken branch one) my shop didn’t have 3.0😔😔😔😔😔😔😔 so i used DNC Great Lakes water only soil hopefully this works and I mixed some 3.0 I had left from the other pot cross fingers for nice transition to its new home March 5 been three days since transplant can’t really tell if they adapted to there new homes yet some sings of stretching since transplant I’ve never transplanted before and I’m not sure if they need water or not so imma chill let them go for couple more days then I’ll water scared to over water them right now since I transplanted them don’t want to over stress them other one in 3.0 seems little droopy to me compared to the one in Great Lakes but Great Lakes soil seems bit dry sooooo idk I’m going keep an eye on them