Recommended
Likes
9
Share
12/19 Beginning of week 6 and NL2 is flowering nicely and definitely the strongest of the 3. Thinking this happened when I topped NL2 i wound up overwatering the other 2 while I waited for NL2 to recover. Regardless the GC and NL1 are showing pistils, just not as prominent and good looking as NL2. Small Moby Dick in the cup is doing great as I plan to top her next week 12/24 Day 40 and significant flowering in both Northern Lights, green crack is flowering at its main cola but significantly lagging behind in growth, we will see what happens. Wound up topping Moby Dick 12/20 because of its strong growth, appears to be recovered and growing 2 colas now 4 days later.
Likes
20
Share
@PAPH_Grow
Follow
Day 75 - Topped up and changed water and nutrient solution. Cut down on the "Grow" and upped the "Bloom". Trimmed more dead dieing and weak leaves. Also trimmed away quite a few smaller branches underneath that just weren't going to have a chance at establishing any good bud sites and most likes would have eventually died off anyways due to lack of light penetration to lower canopy levels. Back left plant has slowed its height growth almost to a stop at around 31 inches from the bucket rim. Front and back right plants have still been growing strong despite the nutrient cut backs but are also forming good flowers at the same time. Will have to boost up the shorter plant to get closer to light as I keep moving it farther away for the other 2 plants. Day 79 - More watering and trimming.
Likes
18
Share
She's becoming a very big lady and the smell it's amazing. A couple more weeks and then it's harvest time . Hope i can provide her a little bit more shelter for if the rain is there. ,,,🍀🙏🌞🤞
Likes
27
Share
She's doing pretty well but it seems like her buds are not fattening fast. I added some new advanced nutrients supplements so we'll see how this week go. How will I know When to do the week flush with plain water? I have no idea, I guess that will be my research for this week. Day 95.... still waiting on my portable microscope, should be here by tomorrow. Praying to the BUD God's for her buds to fatten up. Is it possible to harvest half of a plant? Day 97.....buds are getting a bit fatter. No complains, everything is perfect with this girl
Likes
28
Share
In addition to improving the chemical composition of plants, UV light also accelerates the germination process for seeds and helps prepare plants for higher light intensities. It acts as a natural stimulant for seeds, encouraging quicker sprouting and robust initial growth. Photosynthesis, as we all know, is the process where plants use sunlight, water, and carbon dioxide to create their own food. But here’s a little twist – UV light has been found to enhance this process. When plants are exposed to UV light, their chloroplasts (the tiny structures inside plant cells where photosynthesis occurs) work even more efficiently. This means they can produce more food for themselves! UV light triggers a response in plants by activating specific proteins and enzymes that optimize their photosynthetic processes. This translates into increased growth rates, improved nutrient absorption, and enhanced overall health. It’s like giving the plants a little extra boost to reach their full potential. For instance, when certain flowers are exposed to controlled amounts of UV light, they produce deeper and richer colors. Think of it as a form of “sun-kissed” enhancement! This deepening of color isn’t just about aesthetics; it also indicates improved biochemical processes within the plants.When plants are exposed to UVB light, it is now known something incredible happens—they begin producing vitamin D3 at an accelerated rate. UVB light exposure can lead to an increase in the production of vitamin D3 in plants. The optimal wavelength range for stimulating vitamin D3 synthesis in plants is around 290nm-310nm. Vitamin D3 is produced by UVB exposure of 7-dehydrocholesterol (provitamin D3) in the skin. The conversion to the pre-vitamin D happens by exposure to sunlight at 290–315 nm (UVB). Vitamin D3 is synthesized in the skin upon UVB exposure 290-315nm. The UVB exposure of provitamin D3 (7-dehydrocholesterol) in the skin breaks the B-ring to form previtamin D3, which undergoes thermally induced rearrangement to vitamin D3. Vitamin D3 is transported to the liver where it is hydroxylated at C-25 by the enzyme 25-hydroxylase producing 25OHD3, which is the major circulating form in vertebrates. The 25OHD3 is hydroxylated a second time at C-1 in the kidneys to the active metabolite. Magnesium is used in large quantities for the enzymatic process, which enables the plant to process vitamin D3. Increase magnesium accordingly.
Likes
43
Share
🍼Greenhouse Feeding BioGrow & Bio Enhancer ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱 FASTBUDS 420
Likes
6
Share
Today July 2nd will mark Day 36 in flower. Took the defoliating real well. Now looking forward to see what it do with Open Seasme from FoxFarm. Didn’t use the Lotus. But other water feeding . I just use pure water but PH now 6.5 . No longer in Veg. Time to boom boom bloom . Let go growmies!!! :)
Likes
53
Share
@xbrico
Follow
Day 22 - All ticking along nicely...apart from a smart timer issue the last 2 days!!! :/ At least it was light stuck on rather than off so no early flower initiation!!! Got everything reset and all looks good so far. Will be using programmable timers for flower, JIC!!! Funny thing I noted while making the time lapse, the plants still "Went to sleep" at the time they should...even with the lights on and woke up when they should! Was quite interesting to see! Apart from that, just LST and plucking some bud covering leaves. Dropping the SCROG screen tonight and this will most likely be the last week of veg. As EC was dropping slightly by end of last week, have upped the EC by 0.1 Happy Growing all!!! 💪
Likes
20
Share
@ukterpdoc
Follow
Everything going well c02 bags shoud activate soon so with fans being able to run so low because of the led's I expect bags to be a winner got co2 kit ram controller was going to wait till next run which will be sealed but might give it a try as fans running so low (Any comments friends?)
Likes
20
Share
As you can see my ladies are growing well. The pistils are starting to get purple on the runtz muffin. It starts smelling a little bit and they drink a lot of water! Happy growing :D
Processing
Likes
11
Share
Everything’s looking great! She’s starting to gain speed a bit now hopefully she’ll fatten up, still have a lil bit to go..thanks for tuning in
Likes
26
Share
Finally flowering something out here 😊 This plant has been more than ready for it Nothing exciting yet. day 3 of flowering light cycle. This plant reeks! (On the left: Blue Cheese) Quite a fast response. Hairs in the crowns already. Cheese is a bit slower so far.
Likes
144
Share
@DevilsBud
Follow
FLOWERING IS UPON US for all of the strains I wanted to let the 2 purple berry Kush veg for another week but forgot to put them under the TS-1000 but hopefully there still gone grow fine it is experiment achter all. Have made the switch for 12/12 couple day's ago and i see them all developing 😍 hopefully by the end of next week it will get interesting 👌🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
12
Share
@Roberts
Follow
Ze Chem Bang is growing well. I did a solution change today. I switched her light times 2 weeks ago. Sorry I missed a update. She was lollipopped, and defoliated to open her up for stretching. Nothing else is really going on yet. Thank you Terpyz Mutant Genetics, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
18
Share
@xtchill
Follow
Onto week 7 Gave them a proper lst as you can see. Think I'm going to put into flower 2morrow and see what the results are doing a 7 week veg instead of a 12 week veg. Going to set the scrog net up and get tucking. Looking lovely and healthy atm Peace
Likes
9
Share
800 ml water every day Ph 6.5 Guanogalong veg perls + Guanogalong flowering powder 4 times per week with nutrients 3 times per week clean water
Likes
21
Share
@Hydronaut
Follow
A step back recently: Started a final flush (2 days in), and decided to start feeding her again - thanks to some great GD input! 250 ppm at re-start and will work my way to 500ppm? She's still rockin' along - like nothing happened. She topped out at 350 ppm without tanking PH, so she is stable here. PH is now swinging down fairly quickly last 12 hours. Drained off 1/3 of reservoir and get reservoir down to 250PPM. 5 days later, major PH swings down again. Mixed another fresh reservoir. I am using Zero Water 5 gallon system, and just realized the PPM coming out was 100, and PH at 3! If I am at 100 today, that means these filters have been shot for a while, maybe since start of my PH issue. There is also interesting information about when zero water filters reach their expectancy. They put out fishy smell and otherwise. I will be watching my filters more often and taking more notes since this ZeroWater 5 gal system is really the way to go if you are only growing a plant or two. Filters are a bit spendy but when you take time, gas, convenience etc. its a no brainer (if the water coming out is zero:) - I get about 15 gallons per filter (175ppm from tap). Day 70. It’s been about a day since new res change. Steady Eddie at 250 ppm and 6.2. I’ll let her drink the bucket down a good ways if things remain stable with a drift down. I doubt it though, 5 gallon is fine for 12” autos but at 2’ she really needed 8 gal. Time to up the R&D on the cabinet! Also checked Zero Water again and filter is now putting out 200ppm of 3.0 water. New filters installed! Hope she finishes soon, the top of her canopy slowly getting cooked over the last 10 days. 8" of light distance is too little. PPFD 2000+ at the top, but leaf temps are in the upper 70's. Gotta hit a decent DLI on these lower buds - without nuking the top nugs, right?! As the week concludes, she’s in a fresh bath, at 250ppm @ 6.0 and running stable again. New water filters installed so zero water variable removed. Last serving of half+ teaspoon of GH dry KB ripening, and will reduce ppm by 25/day until I reach 10-15%. 1-2 day flush, if at all.