Likes
Comments
Share
Processing
Likes
5
Share
Extremely surprised by the growth, I put it down to the right temperature & humidity levels as-well as the Canna Rhizotonic.
Likes
346
Share
@Canna96
Follow
This week went pretty well, other than she stretched like crazy and I am now getting worried about running out of vertical space. I also had a few of my bottom leaves get a few brown and yellow spots on them. I did post some pics and asked a question, thank you for the responses, much appreciated! I am thinking about adding my Spyder Farmer LED 100 Watt light into the tent for the nebula auto because it is about 23 inches shorter than the sour diesel. I believe it would only raise my temp about 2 degrees, and possibly lower the humidity by one or two percent. I must say my dehumidifier has been a freaking stud, running 24X7 and not complaining. I should look into adding another unit, it has been in the mid 90's and muggy for about a week. So far I have to say I am super impressed and excited with this setup, the genetics, and with growing this wonderful plant in general. Already planning ahead to my next grow, and what I can do better. I have been enjoying myself and I really appreciate everyone who has taken the time to answer my questions! I am having a blast and am excited to see what this lady will give up in a few weeks!
Likes
32
Share
She is still hungry for extra calcium, so trying to keep that at bay. And she is starting to show pistils 6/18 didn't make it in tent today 6/19 Added 1L am and 3/4L pm Added 3ml cal mag 6/20 added water ph 6/21 added water ph 6/22 added water, added 3ml cal mag 6/23 added water, added 2ml cal mag 6/24 Added water 1.5L Bloom(1/2 Strength) Micro 0.75/L x 11.3=8.5ml Gro 1.0/L x 11.3=11.3ml Bloom 0.75/L x 11.3=8.5ml Cal mag 1/L x11.3= 11.3ml Bud candy 1/L × 11.3= 11.3ml Hydroguard 1/gal x3.5 = 7ml 3 gal = 11.3L Lst Light intensity up 10% to 90% Turned oscillating fan up and made it stay on Record kept here https://1drv.ms/x/s!AmTQ-7u9iyH6kFWgDNVqoDB1_CY1
Likes
13
Share
@PopsFarm
Follow
Day 52 Here you can see the Runtz Auto from @kannabiaglobal / @kannabiaseedsfr / @kannabiaseedsde / @kannabiaseedsint @kannabiaseedsus Nutrients: @atami_deutschland / @atami.international / @stefan_atami / @daniel_atami Soil: @promixgrowers_eur / @promixgrowers_global / @promixgrowers_unfiltered / @promixmitch LED: @powerlux_spain Tent: @secretjardin_ Thank you to everyone who follows and supports my work 🙏🏻💚 This means a lot to me and you should know you are a part of it and only with you all this is possible, you are the best community 😎 Growers love, love for everyone
Likes
23
Share
@Chi_K24
Follow
Hey guys, late into week 5 finally have some time to tend to the gals. It's been almost a week since I last watered them. We had 2 thunderstorms roll in so that kept the ladies quenched but when i went to check them out today most of them were pretty dry. Before I watered them, I topped off the soil level with some more promix hp and started our first topdressing. As usual 2tbs per gal @ 70/30 ratio of 444 to 284. I'm my case 21tbs to 9tbs. After that I water them with 50mL of molassas in 5gal of dechlorinated water with each plant raking about 3L of water. I also defoliated some under growth and to clean up the canopy to allow more light to penatrate prime grow sites. Last week I noticed some fungus gnats flying around, so I put up yellow fly traps with bamboo skewers (best way imo). I also did a preventive maintenance and watered the girls last week with neem oil soil drench to kill off any larvae or eggs that may have been laid. So good so far, as the traps did not have many gnats on them. Other than the usual pm items done, the ladies are taking off quite fast, so I need to stay ontop of things when I can! Hope to see you on the next update!
Likes
Comments
Share
@CrackJack
Follow
Start of week 3 for my White Widow girls from Dutch Passion 🌱 They’re looking strong and healthy, growing steadily under the 150W LED. Leaves are wide and vibrant green, internodal spacing looks tight – great signs of vigorous early growth. This week I’m continuing with light feeding: CalMag, Sensizym, and microbial support like Voodoo Juice and Piranha. Structure is compact and symmetrical – looking forward to the next burst of growth. Let’s go! 💪
Likes
81
Share
@Hou_Stone
Follow
Let's remember, in week 6 one of my king's tart had been broken in 2 because of the tension due to my bad LST. This plant grows much taller than the others. I'm trying to lower his height by doing HST. Currently she does not seem to complain about it. I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity. --------------------------------------------------------------------------- - Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule. -Daytime temperature: 22-26°C -Night temperature: 20-24°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 "houstone3" for: TS LED Grow Light, Tent, Ventilation for 3% off "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits for 5% off https://www.mars-hydro.com/?acc=hou-stone
Likes
30
Share
Howdy growfessors! Another week has come and gone with the outdoors grow. The ladies took a bit of a beating from the tail end of tropical storm Ida. Going to build a partial greenhouse roof to help keep the rain off them, which will hopefully lower the chances for mould.
Likes
25
Share
@BudHaks
Follow
I am now flushing her with plain Brita filtered water PH'd with lime juice to lower her PH. I initially first flushed her with 42L of water and now I am flushing her once a day for 8 days and then I will put her in for darkness for 3 days and then I will harvest her and dry her for 9 days and then cure her for 28-48 days.
Likes
8
Share
Hello Diary, White Widow has completed its last week, the journey has come to an end. Two days after the photo shoot, I harvested White Widow along with her roommates. 73 days since I put the seeds in the ground. 65 days since the start of the vegetation. Really very fast, although it has somehow become the standard on my small farm. But I am still fascinated by how quickly the plant goes through its cycle when it has the most ideal conditions. I don't necessarily mean myself, I try to give the plants the best I can and know how. As you can see in the photos, the result is impressive, White Widow turned out to be a real beauty. This phenotype painted White Widow in purple. The flowers are hard and dense, the branches bend under their weight. One branch even broke when I was setting it up for the photo shoot. That purple color gives it a special look. Some of the leaves have taken on autumn colors, which is also one of the signs that it has matured. This week I continued to observe the samples under the microscope, waiting for the trichomes to turn milky. On the day of the photo shoot, which was day 63, most of the trichomes were milky, some even brown. The smell is very intense, the whole room smells like plants when I open the grow box. I barely wash my fingers after examining the plants. Watering was standard, every three days. This week I stopped adding nutrients, I just lowered the p.H. to 6.0 and water the plants with clean water. After the photo shoot, she was in the grow box for two more days to drink all the water from the soil so that the drying would be more efficient. Before cutting, I removed all the leaves from the plant to also make drying easier and have less work to trim the dried flowers. But also to prevent the formation of potential mold. After cutting, I left her upside down in the grow box to dry. Now I'm waiting for the flowers to dry well and to see how much White Widow has really rewarded me. See you when that happens. Here's what the last week looked like. 19/09/2024 - Day 57. Watering. I prepared 9 liters of water, lowered the pH to 6.0 and used that amount to water all three plants on the farm. 22/09/2024 - Day 60. Watering. I repeated the same procedure as three days earlier. 24/09/2024 - Day 62. I watered them all with 1.5 liters of water each plant so they would be fresh for the photos. 25/09/2024 - Day 63. End of the last, 9th week since Purple Lemonade began its journey. Photos. 27/09/2024 - Day 65. White Widow has been harvested. That's almost all from me for this diary, the final report that follows after drying and testing remains. Thank you all again for your support and comments.
Likes
15
Share
@Roope
Follow
This is amazing how that led efect all over tent and Wilma ooh its like magik liguid tranfer system and im like a lot, No going back old methods! PH is keepeng good 6.1 - 6.3 and tent heat is when open 28 celsius and 30 or 31 when hortimol is on, And still 20% not use i klic it full on when start blooming, I havent had to use extra fan upside of led once and still have to get EC meter heard that is like must have eguipment. So thats my next week projekt. But overall looking so fresh Green and healty plants that im happy. Till next week. ReggeaOkkey!
Likes
4
Share
@Venabr96
Follow
Planta com otimo crescimento mesmo em floraçao grandes ramos bem volumosos e lindos brotos. Leva rega de 3 em 3 dias com agua desmineralizada
Likes
3
Share
Week 9 (26/07 - 01/08) 27/07 We can start seeing the flowers forming Will maybe need to do some supercropping if she doesnt stop stretching
Likes
1
Share
So it's time to harvest Russian machine guns. The plants were high because we pulled them with a lamp and did not use LST. The final product was removed on the shelf of the refrigerator.00
Likes
13
Share
@BobRoss
Follow
Hope the tops wil develope more , 2 weeks to go.
Likes
15
Share
@Mr_Prawn
Follow
Empiezan a salir unas manchas marrones, tengo muchas hojas, estoy pensando en defoliar.