Recommended
Likes
Comments
Share
Likes
20
Share
visually appealing color wise but buds are larfy/ and fox tailing.
Likes
7
Share
@BIYEI
Follow
Floracion (Tiempo estimado 64 dias) Primer Semana de Floracion 08/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 09/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, subir demaciado la intencidad del ventilador fue contraproducente ya que las hojas sufrieron quemaduras por frio, se a empezado a regular un poco mejor la temperatura pero el intractor y extractor de 4 pulgadas no estan eficiente, empeze a provar con hielo embotellado para bajar temperatura de la solucion nutriva, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 10/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 11/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 12/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad. 13/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, se cambia extractor por uno de 8 pulgadas con filtro, se mantiene la temperatura a 21 grados con la lampara a 75 % de potencia, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad. 14/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad.
Likes
5
Share
@123Grow
Follow
Just tucking away 🤣🤣🤣 Last weeks feeding was slightly too high for transition. I am realizing that the amount of fulvic/humid acid reduces the need for full strength ratios. This week we are going to feed 800 again, as the need for ppm’s has increased, but I am going to stay under 850 unless I see deficiency in leaves. The photosynthesis plus has been added to the mix. I know, I have recharge. However, there are certain strains in PP that recharge does not have. Specifically there is a strain for absorbing more from the lights. I have some purple stems from the light being a little to intense. We will be adding a little more cal-mag to the next feeding also. Looks like feeding will take place Tuesday/Wednesday this week. All plants are female and no Herms present for the party 😂😂 10-25 did a pre-feed of cal-mag, 8 oz. Later this evening I will do the main feeding 3 cups. The ratios are still 8-8-8 at 800 ppm’s. The extra ppm’s come in the form of extra cal-mag. Did some tucking as I am in stretch phase. So I work with a grower who is 76 years old. He has some old school techniques that make sense. He pre-waters his containers with 25% water. The remainder 75% is either nutrients OR additives that need to be added to the water. I took it a step further. I added cal-mag to the pre-water stage. Then I fed the nutrients second stage. Cal-mag is the “carrier” for nutrients throughout the plant. “Adding the nutrients after, makes it easy for the nutrients to fully saturate the soil and reach all the roots. This also prevents salt build up.” Ron’s Words. I will say my containers held double the amount of water using his method. 10-28 added some reflective material around the sides. My Growmie at RedmanFarms suggested I add it to the room. I am inside of an open air room for flowering cycle. Today was watering day. First watering was a light dose of cal/mag. Second watering was kelp, seaweed, photosynthesis plus, monk beans SST, fulvic/humic acid. One of the plants ( top left) seems to have a sulpher/magnesium deficiency ( it’s also the one with the soil I don’t like). I made some Iron/Tone tea by Espoma at 200 ppm’s and did a foliar feed. So far I see some progress on purple recessing and the growth has started to match the other 4. I have 1 more week of tucking to do and then I do a HEAVY defoliation on day 21. After than I won’t touch the plants other than feedings and water.
Likes
12
Share
Buds so heavy the branches are flopping all over. I guess that’s one of them good problems. Hopefully the zip ties and walls keep them standing til harvest.
Likes
9
Share
Se realiza transplante a maceta definitiva de 20 LT AIRPOT Sigue el riego día por medio
Likes
490
Share
Day 29: not much is going right now. Day 31: boosted with some more nutes 2,3ml per liter canna coco a&b Mars hydro SP3000 High PPFD at 2.8 umol/j, average yield at 2.5g/w, increasing your yield 50% or more compared with old blurple and HPS lights, 300 watts output. Dimmer knob added, more convenient to adjust the brightness. Up to 30 lights can be daisy-chained and control together on just one light, or just have one light in a 120x60 tent. https://www.instagram.com/marshydro_aliexpress2/
Likes
4
Share
primero hidrato mis semillas con el bio potenciador por 4 horas mas menos, luego las paso a un taper hermetico con papel absorbente hidratado con la misma solucion hasta que mis plantulas tengan 3cm app.
Processing
Likes
3
Share
3rd week Ladies doing good ,not many changes Watering every day , humidity is around 35-45 switched the time to 24/7 got some automatics in the tent
Likes
36
Share
Petite taille effectué, j’ai coupé l’apex et j’ai laisser seulement le noeud juste en dessous de celui qui étais le plus développé, pour vois si les deux repousse de l’apex et celle du noeud en dessous arrive à la même taille/croissance , afin d’être le plus symétrique possible. Car avant tous je suis passionné par l’art végétal et le bonsaï, j’ai commencé à cultiver du cannabis il y a maintenant 3ans, un été j’ai planté une petite graines dans un bête terreaux vide de nutriments, et là tout a commencé. Mais comme dis précédemment j’aimais l’art, et ce plant en question je l’ai transformé en bonsaï, un magnifique bonsaï, un chef d’œuvre, au quel j’ai perdu toutes photos. L’année d’après j’ai recommencé le même scénario, une graine et on recommence, la se fut un échec, plant trop gourmand et trop sensible au stress, il m’a lâché à 3/4semaine de floraison, puis maintenant 1ans que je cultive en intérieur a rechercher une bonne recette de living soil, toujours à la recherche de perfection jusqu’à couper avant même la fin de floraison car j’étais pas satisfait du résultat. (C’est pour ça aussi que j’ai supprimé tous mes journaux) J’ai coupé deux cultures comme ça et j’ai fais qu’une récoltes sur la troisième. Maintenant celle qui m’excite le plus est la petite graine d’extérieur, oui comme on dit jamais deux sans trois, plus de 1ans que j’attends cette variété, la Frosty purple freak. Le mutant violet de chez Khalifa Genetic. Que je vais bien évidemment travailler comme un bonsaï, mais symétrique , je vais éviter de trop le stresser comme j’ai eu du retard sur la croissance du a certain imprévu de type limace et temps catastrophique. (2 graines bien planté dans mon derrière.) je vais essayer de bien le diriger tous en essayant d’avoir une certaine récolte, en faire un bonsaï crée d’énormes stress au plant et ralenti considérablement la croissance, pour essayer de récolter 50/100 grammes sur le plant en extérieur faudrais approcher les 3/4 mois de végétation si tu implique des haut stress training et de la coupe a gogo. Et j’avoue que j’ai pas payer plus de 50litre de living soil juste pour 15/20 grammes de récoltes sur le plant, même si la satisfaction d’avoir fait une œuvre d’art, ça ne vaut pas le coup, je ferais mieux l’année prochaines, je dois accepter cette défaite. J’ai mis des vidéo de mon deuxième bonsaï, il étais en début de floraison et il avait environ 4mois, sans nutriments ,je lui estimais 30/50 grammes en fin de Flo, mais il m’a lâcher. Dans les deux dernières vidéo, il y en a une où on voit bien le dépôt bactérien et nutritifs du thé de compost oxygéné. Recette du thé pour la semaine 15litre d’eau de pluie 30 gr guano guali 15 gr Meal wormcastings 15 gr nettle 7 gr spirulina 7 gr Hydrosolat Kelp 225 gr wormcastings 15 gr hydrolysât de poisson 15 gr Comfrey 10 gr levure saccharomyces cerevisiae souches lycc 6420 60 gr Zeolit of chabasit 15 gr Azomite 45 ml de mélasse 15ml d’acide Humic et fluvic J’ai arroser 6 litre pour la purple freak et le reste a d’autre plantes Et un autre arrosage avec 500ml d’eau neutre avec 1gr bacilllus amyloliquefaciens x5 qui a été effectué le lendemain du thé La culture se passe bien, du côté de la purple freak Aucun problème à déplorer, plant très résistant, au changement de température et condition climatique supporte très bien les orages et les temps pluvieux et chaud, pas de signe de maladie, j’ai actuellement des ravageur depuis le début de la culture, pas un signe de problème. Réagit très bien au coupe, j’en suis plus que ravie, elle fait partis de mon top1. Seul truc qui m’inquiète, c’est ce mauvais temps. Un mélange de chaleur et de pluie, qui a amené de l’oidium sur certaine de mes plantes extérieur, j’ai peur que cela se propage sur la purple freak. Je vais devoir traiter tous cas, sans traitement agressif bien sûr.
Likes
22
Share
Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....
Likes
300
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Stretch continues, some stems becomng big and full of hedgehogs 🦔🦔, them coming along, rempersture are better. 💪 Continuing scrog and fight with leaves. 💧 Give water each 2/3 day 2 l Water + Roots + Bloom + Zym + Sugar Royal (1 + 3 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 33 cm Mars Hydro Fan kit Setting 7 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Tropicana Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/tropicana-cookies-fast-flowering
Likes
7
Share
@Nikkov
Follow
excellent recovery from the top pruning I did last week, again watering with top crop top veg and they seem to be doing very well enjoying the substrate and the fertilizer and the climate
Likes
12
Share
7ª Settimana di Fioritura 💐 Eccoci qui con la bella Lemon OG 🍋🌊 che é diventata grande! I suoi fiori sono sempre più carichi di neve ed il raccolto si avvicina sempre di più!
Likes
14
Share
And within less than 40 days she was full on flowering.... How fast will I be able to finish her?
Likes
9
Share
@Delisi
Follow
Привет👋🏼 На этой неделе все нормально, кроме того что при поливе на выходе у меня показывает ph ниже, а ppm выше чем на входе.
Likes
69
Share
@AsNoriu
Follow
Day 82. Last week for them, next weekend they are down. Was expecting them to be developed a lot better, but this grow went with hiccups too ... Looks like they stuck in the development a bit. My friend left light dimmed down twice for few days each time ... Gnats ... And we are here ... Still colas fat, Gelato not so smelly, Wedding Cake is a lot stinker. Happy Growing !!!
Likes
28
Share
We are at the beginning of the 9th week of flowering. The trichomes are slowly beginning to change color. I'm now going on vacation for 9 days, I couldn't have planned it any shittier. But anyway, I've decided to keep them growing and then probably harvest them straight after my vacation.
Likes
14
Share
Processing
Likes
4
Share
This week everything went as I figured it would she has made a little jump 😄. I'm so happy that she has matured.Sorry that I took a minute to post for week 4 . Hopefully she should start to get her bud site started in week 5 I can't wait to post her.