Recommended
Likes
Comments
Share
@Unkraut
Follow
such an beautyful strain! the colors are really outstanding and the scent is incredible! loads of resin production on this one, not the highest yield but insane quality!
Likes
23
Share
@Ksouth1
Follow
Last week went well. Not much to say besides she is coming along nicely and fattening up daily. If you look closer you can see the purple coming through on some spots of the buds. She turned into a beautiful plant. This is one of the best strains I have tried for pain relief and sleep. It's one of my favorite ones. This is a great example of quality autoflower genetics. Should get a decent amount of good quality meds from her. Was the first auto I grew in a 5: gallon aerated fabric pot. Great outcome. Will update as she progresses. Until next time happy growing to everyone!
Likes
1
Share
Was just using water with the last 2 plants this week. They both plumped up a bit and got more color going on, which is exactly what I was waiting for. Overall, it was a nice grow with only a couple hiccups.
Likes
55
Share
Tangie'matic showed me that she was in it for the long haul right from the start. This was my first time topping an autoflower and I wasn't sure how it was going to turn out - but each time she took on stress, she pushed back even stronger. I topped her once at the 5th node, and then used some low stress training to create this beautiful canopy. She really grew like a dream! Partway through flower I had to move my grow tent from my second-floor bedroom to my not quite warm enough basement. I had assumed that the heat from the grow lights would have compensated, but it didn't take me long to realize how wrong I was. This poor plant had her reservoir and atmospheric temperatures dropped with no warning. She held in there while I figured out how to get the environment closer to desirable and less feeling like a frozen tundra. In the mish mash of environmental flux, some of her buds began to foxtail. This was my first time seeing this happen; so despite the fact that it's not desirable, seeing foxtailing happen with my own buds for the first time was actually kind of cool. After the environmental woes were corrected, she stacked even more. Her buds nice and dense with a citrus fragrance complimented by some subtle skunky undertones. Before harvest I changed out her reservoir and gave her a 4 day flush along with 48 hours of darkness. When I opened the tent on harvest day I was punched in the face with a beautiful fragrance of mandarin that instantly lifted the corners of my mouth into a sweet smile of satisfaction. I cut her down and hung her to dry in my climate controlled closet holding a perfect 69.8°F and 55% RH. Six days later her buds were ready for the jars. Her dry buds gave me 8.8oz/250g of quality bud and an additional 2.9oz/82g of popcorn buds. Just being in jars for 24 hours has REALLY brought out even a stronger citrus aroma that is just a true pleasure to take in. Will update with more after the cure and first smoke experience. ✌️💜🌱0000
Likes
13
Share
Some of you may have wondered: Why do I use CO2 at average 950 ppfd μmol/m2/s (moral flow)? The answer is quite simple. Because of lack of space in some regions of my cultivation area, I simply cannot keep the ideal distance to my Sanlight high-performance lamp, due to some height growth of various strains. And so some of the main colas have ppfd values of 1250 μmol/m2/s and even more... So this is how I manage to achieve and compensate for such high radiation levels even with a CO 2 balance. And I have to say, my strategy to avoid various light stress symptoms works just fabulously. In combination with CO 2 implementation, my babies are simply unbeatably insensitive to light. Thats it! Beginning of 3rd week flowering: Again feeding my babies by 36 hours fermented potions of Bio Tabs Kompost Tea PK-Booster (15 g pro Liter) and added: 5ml Orgatrex/Liter 1 Spoon of Bactrex 1 Spoon of Mycotrex 1 Spoon of Mycco-Vital 1 Spoon of Dynomyco A little tip for those who are interested in small modifications that have a big difference or influence - on the result - effect - beauty - health - taste! Before adding microorganisms or beneficial bacteria or Mycorrizae and Trichodermas, please use oxygen-saturated water. On the one hand, unwanted chlorine gases evaporate and the small world of the microbiome becomes even faster and more rewarding in compost tea to sprout. Last but not least for this week, I would like to introduce my reasons, why I prefer growing biologically and sustainably. First of all, it’s something which suits very well in these times/days we are living now. Sustainability is a big need and task for our planet. 🌎 Nature means life. Our home, the air we breathe and everything that surrounds us. Not just today. Hopefully tomorrow as well. Maybe I'm starting to protect our environment on a small scale, but maybe I can also make a big difference at all. If you change the way you look at things, the things you look at change... I thought about what’s the difference, between Mineral Feeding and Super Soil Feeding. It’s very easy. Biologically Growing is a similar process than the natural soil activities out there in the lap of nature’s. So plants has to work and interact with the microorganisms and microbiomic communities in the soil. So the plants will never get lazy like the lazy ones of mineral feeding growers. If you grow biologically, you will feed the soil first and the microorganisms will support every parameter next to your plant conditions. And that will generate an unbelievable spectrum of Terpenes and Trichomes you will never forget. It’s the same comparison, when you daily visit McDonalds and you eat only fast food. How does your body and mind react on this shit for money?!?! May I invite you to think about it… See you next week dear Growmies! Have a nice Weekend and take care… Peace out! Addendum for Day 53: At the moment we unfortunately have another winter onset here in Germany. This means that I am forced to take additional heating measures due to structural facts in order to be able to keep the temperatures constant. After all, just tonight the thermometer climbs again to -1 degree Celsius. In addition, my exhaust air system runs out of my bedroom terrace and I therefore grow winter and summer with the patio door open. Well, sometimes I experience real weather-related challenges. But all in all, no problem... "Where there's a will, there's a way." Addendum to pouring out the fermented PK tea: I always administer half a liter of lukewarm aerated water with 3.5 ml of cannazyme per liter to each plant. This means that the "root machine" is not supplied with supplies unprepared and the nutrient solution can thus also be better distributed in the soil. Since I also work with cloth shoes, I spray them evenly moistened everywhere with water that is also warm before pouring them out from the outside. This has the advantage that the moisture stays where it should: in the pot! ... I did the math today ;-) We are still in week 7 until this Friday. And week 8 starts on Friday! OMG... still so much time yeahh! Today my Fast Buds Sour Jealousy and Sweet Seeds Big Devil and Dark Devil Automatics arrived. I'm looking forward to it. This time Fast Buds next Time Sweet Seeds. Love them too. Very beautiful genetics. Today a review video of the beginning of week 3. At the time of the pictures, I had minor signs of nitrogen excess. (Light peaks first at the crown of the roof and then slightly continuing to the middle section.) I then painstakingly racked my brains as to why this could be. I found that very slight dry spots had formed and therefore the root found small accumulations of nitrogen that caused its problems. But then, when I carefully homogeneously checked the moisture content in the substrate, the problem evaporated again. However, they had not shown any loss of growth rate during this time. Nevertheless, they developed as expected. They Strawnanas had no problem with that. In the end, I always have a hard time killing them. But I guess that's the way things go. We live and die. We come and go. But it's not there yet. ;-) Tomorrow is day 56. Tomorrow’s updating day! Can't wait to see their progress. Have a good time and see you tomorrow… 🏽🕊️ 🏽 ☮️🕊️
Likes
10
Share
@BossHogg6
Follow
Going into this week on the 12/12 light schedule. It grew to about 10.5 inches from the light. The light is now up to 50% brightness. A full dose of bud candy was added, instead of the half added last week.
Likes
17
Share
@Dunk_Junk
Follow
Flowers filling out this week. She's doing her own thing really.
Likes
4
Share
11/08/2025 - Tenho regado apenas com agua mineral com ph 6.2, para não saturar mais com nutrientes. Luz tá a 100%. Agora a ver a acontecer :D
Likes
7
Share
@russrahl
Follow
Was a great week for this girl, my other 3 x Ayahuasca Purples in the same RDWC system were showing slight nutrient burn and PPM was a bit high at the end of last week. I dropped the PPM down to 450ppm for the other plants but this girls seams to take whatever I give her. She’s starting to put on the bud now and everything’s been smooth sailing so far for this Alien Technology girl. I added a 2 x 1000w(180w actual) Morison LED’s to this tent as well, 1 directly above this girl angled into the tent. Figured I had them sitting doing nothing so I might as well get some extra light wavelengths my HPS doesn’t really push out. Temps on the canopy top are around 24c for her, and light meter shows about 55 DLI from the HPS when directly above her. I can’t measure what the HPS and LED combined are, but with the angled LED I am only seeing between 20-35 DLI from only the LED when the HPS is on the other side of the tent. So kind of an experiment to see if the added Lum’s and light spectrums help. Well that’s it for this week, end of week 4 and all is good. Cheers 💨
Likes
2
Share
9/14/24 plants growth is taking off. Shes responding well to
Likes
26
Share
Mar 6th - last-light tonight for Panama x Malawi. what was the old news flash...? “pictures at 11” - then a minimum 36 hrs in the dark. RH 35-40% A wet-trim b4 hanging is planned. See where that gets us... - pictures taken and lites out by 21:00. -Harvest starts Monday Afternoon - still working from phone pics, more later Mar 8 -Tent gets opened at Noon after ~ 40 hrs of dark. Then it’s pictures and a trim as Harvest happens today.. - a video has been added to the pictures, doing a last lap around the tent before they were harvested Mar 10th -off the clothesline, trimmed & weighed and now into a tent for temp & humidity control. - 4-5 days of 19c @ 50-55% Rh is the target Mar 13th both batches were weighed and contained. Left plant was both Larger and contained more Pot that the Right plant, which has historically been smaller from the start Left plant contained 5.6 ounces. The Right plant, which also had the UV-B bulb, and was smaller, contained 4.6 ounces. ... poking at details and photos as you read this
Likes
10
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent
Likes
6
Share
@Ninjabuds
Follow
Permant marker the one seedling I could not be more happy with. It has a distinct different look to it than any other plant in the tent with strong growth going on. I'm sad about the other seedling thou the 1st set of leaves were kinda deformed and it has like a spiral thing going on where new growth comes from. Hopefully it comes back around, I always like seeing atleast 2 phenos of a strain I feel it gives you a better idea of what a strain is. It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.
Likes
13
Share
@GrowGuy97
Follow
Flower day 42 - Mainline is doing great, has by far the biggest buds of all the Gorilla Zkittlez, can’t wait to see how she turns out👍🏼 Thanks for following friends will try to update more
Likes
15
Share
@Aero710
Follow
Empiezo cultivo de Dos Si Dos 33 de Barneys Farm, el medio de cultivo hasta que las plántulas tengan minimo 5-10cm y maximo 14cm será Lana de Roca, alcanzada dicha altura se transplantaran a sus macetas finales con 100% Perlita! Seeesh :)
Likes
144
Share
@DevilsBud
Follow
New week for the 7 strain 11 plants grow Everything is going great some little things here and there but nothing to be worrying about so i am happy how it goes one plant had balls and couple have some droopy leaves on them but have feeling my temp is way to low in darkness 16/3/22 I always show the good the bad and the ugly made couple mistakes wiles training but luckily these plants are so strong give some support and the branch that broke will fixes here self 💪🏻 Will be updating Tru the week And remember just grow weed and stop growing bullyish behavior visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
105
Share
@Natrona
Follow
Frostbanger Plants 1-6 Week 9 May 18– 24 FLOWER 5 Nutrients : 3 gal GH Micro 20 ml GH Gro 10 ml GH Bloom 30ml CalMag 15 ml Recharge 10ml Green sensation 15ml Power buds 7.5 ml 5/18 PH 6.67, PPM 935, temp 68.5 1 ltr each 5/20 PH 6.67, PPM 1330, temp 68.5 2ltr each 5/23 PH 6.6, PPM 1570, temp 68.5 2ltr each 5/24 pics & vid Since all 6 gals are getting frosty, I did some trichome pics. The statistics on Frostbanger indicate 50-day flower. Pics show mostly clear and milky. There are a few with amber trichs and many orange pistils indicating maturation. At least 3 more weeks for maturity on these gals. I continue manual control of the environment and using 3 circulating fans and the 4” exhaust vent from my 3x3. I have the AC pushing air in and the exhaust pulling air out. This creates a neutral pressure tent environment-neither positive nor negative. It looks like growth has stopped and plant height has been reached. Now is the time for buds to fatten and frost up. All 6 of them are short remaining less than 3 ft. They range from 15 to 31 inches. #4, 5 &6 are showing some fade, particularly #4. Upon opening the tent, a melon smell comes off the buds if I get close, and more stickiness was observed during the process of defoliation. They are living up to the new strain’s name. #5 is the frostiest followed by #2. Wow week 3 of flower and that much frost already. Before FastBuds announced the strain name and characteristics, I was disappointed that FBA2502 could be an indica sleepy strain but the universe provides what you need at the time. The new strain profile indicates a whopping 29%THC with mainly sativa uplifting, euphoric, social effects with sweet fruity flavors which I love and enjoy. In addition, I recently bought a dap press and this strain is frosty and resinous. She will be great to press for live rosin. FBA2502 is FROSTBANGER. Meet Frostbanger Auto, an autoflowering and Indica-leaning hybrid packing a staggeringly high THC content averaging 29%, making this one of the most potent strains on the market. It was created by Fast Buds through crossbreeding Gorilla Glue and Chemdawg, two equally iconic strains. Growers must know that these difficult-to-grow plants will pose specific challenges in terms of environmental control and nutrition, making them best suited for cultivators with some experience under their belt. The flowering cycle is short, averaging only 50 days, and yields are usually around 300g/m². The Frostbanger Auto flavor and aroma are both mouthwatering with a delightful combination of sweet, fruity, and flowery notes. The high is mainly Sativa-driven with uplifting and happiness-inducing effects that lead to euphoria and a general sense of well-being. You might feel sociable and talkative, but too spacey to say something. Following this surge of energy comes a deepening sense of relaxation, leaving you sedated and completely at ease with the world. Due to its potency and these long-lasting effects, medical patients hail Frostbanger Auto for treating chronic pain, stress, and even depression. Measurements: #1 15” #2 20” #3 17” #4 30” #5 31” #6 24” P.S I added a no churn ice cream recipe in week 4 of Natronas recipes. It is easy 3 ingredients. I bought Mango puree instead of fresh and reduced that to reduce water content. Try it. 😋 Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫
Likes
15
Share
Welcome to my Epic Buzz Diary sponsored my Anesia Seeds. Bit of lag in a few of my diaries. Apologise to the followers. Swapped atm. Veg Days 4-23 Days 8-28 3 weeks Plant grew really well. Really fast out the gate. Done a repeat of the hard Defoliation method used in my Ztrawberry to see can I replicate that even strong node growth. This was the 1st of very high stress defoliations that will be done. Y, well I wanna see how hardy these genes are. And how they respond to various stress factors. So, my 1st hard defol was done at the end of wk 3. I removed all the fan leafs and left the small nodes to fend for themselves in the hopes it would actually push an even node growth, instead of older bigger fan leafs drawing in more energy and therefore making bigger nodes. You may think she is small. But, look at it from the point of them just been nodes and no big ass fan leafs that make your plant look twice the size it really is. So, stripped her bare. And let her run, and oh boy she did. Lovely node growth. Very well defined. Explosive growth from about 5 days into the hard defol she took off like a bat outta hell. Really took off coming into wk 4. Sadly, this is where the good times kinda stop.. Next wk, its all down kill, hit with a serve Sulphur issue. That came on with hrs and looked like a wk old issue. The response time from growing in co2 is so quick. The plant is finding it hard to show symptoms like a normal grow, where you'd see a gradual illness occur. But, this way. You really have to be on the ball. Its definitely not something I'd recommend doing until you get a few grows under you. The slightest oversight will throw her into a tail spin. Feel free to message me if you're interested in using co2. I'm by far no expert but, I know a fair about of head knowledge and hopefully soon experiences in it also and fixes etc. Methods Will be using my hard defoliation techniques to push this girl to making nice strong nodes, hopefully, that's the idea. Thus far. Its been going to plan. I've achieved a really good solid base, to build heavy buds on. Soon I'll start to tackle some sort of shape. I had to do a repair to a snapped node. Was literally hanging on by a very thin bit. Recovered strong and has set. I might now HST the otherside to counter the energy that this side will have more of now. As when you HST break a stem and it repairs the stem itself hardens up, storing more energy/fluids and helps direct it better up through the full filled nodes, so they're not like straws. So, the broken side will act like it's been HST'ed now. So, only makes sense to do the other side to keep a somewhat even energy distribution Thanks to my followers and sponsors from Anesia Seeds & Spider-Farmer. Without you (my followers/viewers I couldn't do any of this, nor would I be or have all I do without my sponsors. So, a big thank you from GGST. Look forward to seen your work. Either way, thanks for stopping by.
Likes
2
Share
Had a little stretch due to heat and had to higher lights. Bud gaining now day 21 today in flower happy where they are done alittle trimming of some fans blocking bud sites.