Recommended
Likes
Comments
Share
Today marks the beginning of the last week of flowering for my cannabis plant. After months of care and patience, I can finally see the first amber trichomes starting to form. It's a sign that the plant is nearing the perfect time for harvest. The buds are dense and frosty, and the shift in trichome color is telling me that the plant is at its peak potency. In a couple of days, I'll move the plant out of the tent and into complete darkness for 48 hours. This process is supposed to help boost resin production and make the final buds even better. After that, it’ll be time to cut her down. It's exciting to be so close to the end, and I can't wait to see how the final product turns out!🌱🌱
Likes
13
Share
@Drawer
Follow
A sad week, I found bud rot and had to take my plants out and do a big check and remove all dense underdeveloped growth. It will be a pretty big hit on the yield I guess but the most important thing is learning and that I did. The bud rot could spread due to my RH being 65/70 at nights and it used to be +80 before, + bad airflow. I got new fans in the tent and my dehumidifier was ordered already but its not in yet. On the other side, the plants are looking pretty damn good, they smell amazing and 3 of the 4 plants is getting a very dense nug structure.
Likes
25
Share
week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.
Likes
38
Share
@Snakeking
Follow
Everything is fine i still water-and feed them 5 times a week 2 times light compost tea with bath guano and molasses. I startd to add iguana juice bloom in my compost tea! Lets see the reaction of my girls. I also add a little bit of rhino skin by advanced nutrients against heat wave
Processing
Likes
6
Share
Cha-ching!🤑 Added some to my fertilizer mix. Bubba looks better than ever, gradually growing pistils 😎
Likes
5
Share
@SgtDoofy
Follow
April 2 LST is really working well. Letting the plant fully sacrifice the yellow leaves before I pull them off. Fed a half gallon of RAW BLOOM yesterday and a full gallon 2 days prior.
Likes
39
Share
Gracias al equipo de Terpyz, XpertNutrients, Marshydro y Pro-Mix, sin ellos esto no seria posible. *💐🍁Kosher Kush X MDC TEST: Test de una nueva cepa proveniente de dos grandes genéticas, Kosher Kush x Mandarine Cookies, una de ellas está en sustrato Pro-Mix Hp Mycorrhizae. 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 4: Muy buena semana, toda la carpa se ha llenado de lindos erizos que comienzan a alargarse desmesuradamente. La cantidad de resina aumenta dia tras dia, estan comiendo como locas. Con los Adlite de Marshydro y el FC-6500 se pueden apreciar futuros buenos cogollos, las plantas se desarrollan salvajemente 💪🏻🔥. El olor de la carpa es bastante intenso ☠️. Potencia del foco: 100%.
Likes
5
Share
@Brusser
Follow
This week I just added water and did some defoliation of leaves that were starting to show signs that their last nutrients were being used up (browning and curling up). From my last grow I know this means we are getting close to harvest - my guess is within the next week my post may be about harvesting, but I won’t rush it. I can also tell we are close as some of the stems are starting to have trouble holding the buds up. Trichomes are clearly still cloudy on both plants but in the last couple of days I’ve started to see some amber in the trichomes in different areas too. Cleaned the plants up real good with defoliation and will see where we are later this week.
Likes
21
Share
@Bak2Blk
Follow
Well they're still doing well. No other seeds found. I guess we're in the home stretch at this point. Just keeping them watered and fed whenever needed.
Likes
6
Share
This is actually my first time growing in Coco, so had a few issues in feeding at first.
Likes
6
Share
A day late but Yes looking good. You can observe the new set of leaves. She's adapted nicely into a bigger container.
Likes
14
Share
Week 7 Update – Recovery and Growth 🌿 Sorry for the late update—I was completely out of commission the past few days 🤢, but luckily, my girlfriend stepped in and took care of the plants. The good news? The stretch is finally over! But note to self—never again 9L pots for plants this size! 😅 BioBizz#1 – BT23 Despite a “drain” pH of 7.8, she’s doing okay overall. However, this will be my last run with BioBizz. While I’ve managed the CalMag issue this time, Advanced Nutrients has completely won me over. AN#4 has thicker stems and looks more vigorous, and AN#3 bounced back quickly with AN nutrients. AN#4 – BT23 She’s praying to the light every day and is officially the largest and healthiest plant I’ve ever grown—no deficiencies so far! 😍 AN#3 – BT19 I had to defoliate heavily, but you can barely tell. Height is becoming a challenge, so I’m hoping it just barely fits—because it has to! 😅
Likes
6
Share
Bud sites are getting ready now. I did a bit more LST and removed a few side shoots which never gonna make it due to lack of light. I replaced the light, under the TS 1000 she was praying all day long. On the previous run I had problems with the FC3000, it was turning itself off at random times. Mars Hydro was kindly sent me a replacement controller, so far it seems like this problem has been solved. However, I tried to use the app again and it’s still shite. 💩😂 So I just use the light in manual mode. Such a shame for the extra features I cannot use. For DLI I will use the following chart: AUTO FLOWER LED LIGHT INTENSITY Recommended LED PPF/PAR Values / DLI Based on 20 hrs. of light. Seedlings 150 - 200 umol / DLI 10.80 - 14.4 moles per day Veg up to 9" 450 umol / DLI 32.40 moles per day Early bloom 500 umol / DLI 36.00 moles per day Mid bloom 650 umol / DLI 46.80 moles per day Late bloom 750 umol / DLI 54.00 moles per day Ripen 400 umol / DLI 28.80 moles per day *** Use extreme caution going 700 umol or higher @ 20 hrs/day this could cause leaf burn*** The only difference is that I will keep this run in 18/6, so I ignore the PAR values above. IMO the best thing you can do is to read the leaves all the time and use the charts as a guidance.
Likes
60
Share
@Roberts
Follow
Alaskan Purple auto is doing good. She had a solution change. I also trimmed out the bottom of the plant today. While doing some selective defoliation in the canopy. She is doing good under the Medic Grow Mini Sun-2. She is stretching now, and should start developing her colas soon. Thank you Seedsman, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Processing
Likes
154
Share
@FAST_BUDS, Hi all the happy people here in GrowDiaries. This is my second cultivation ever and it will be fun to try a bigger space than my closet grow. First, I'm just going to say I'm done with the construction of my new growroom. I put some pictures on the construction here in week one. The room is 2.14 meters by 1.7 meters and has a ceiling height of 2 meters. It provides a floor area of ​​3.6 square meters. I use a 54 Watt Lightwawe T5 for germination and 2 Pcs 400 Watt HPS lamps. I have a channel fan that replaces the room air about 40 times an hour to get a comfortable environment in the room, the air enters a fresh air intake from the outside. The air is purified through a carbon filter to then leave the room to the rest of the basement. Then I use that heat to heat the rest of the basement. I will use 8 pcs 15 liter Autopots to grow with and a 100 liter water tank that supplies the pots of water and nutrition. I will grow completely organically in soil and will watercure my buds to get the best possible medicine for me. But there are no cultivation rooms to be displayed here, so I continue with what is most important. Today I have put my seeds in my moisture dome and hope the seeds have germinated within a few days. I am very excited to see how the new growroom will work and how this new secret CBD plant from @FAST_BUDS, will turn out. .............................................................................................................................................................................................................................................................................................................................................. Update 2017-08-15. Both seeds have germinated and planted in small pots inside the humidity dome. I'm so glad it worked so well and now it's just hoping they'll start growing and become 2 big healthy girls :) ............................................................................................................................................................................................................................................................................................................................................... Update 2017-08-16. I have mixed my own soil today. Its 40% sieved peat harrow H2-H4 0-30 mm, 45% sieved peat harrow H4-H6 0-30 mm. 5% sand and 10% of compost soil. And i use 15% of perlite and mix it all together. .................................................................................................................................................................................................................................................................................................................................................... 2017-08-21 The 2 sisters are doing great, Nr2 is a bit after Nr1 . Some new pics.
Likes
21
Share
@Rollex420
Follow
Its finally done! So on the next days buds will continue to dry regularly in their jars. The total weight of the two wedding cake was (82g)..on the next few weeks I will continue to check their weight, while the total weight of their trim was 34.1g which i will use them asap in order to wash some hash. I did some tests with some small buds to feel the flavors and get an idea of what I would expect.. I was struck by how different the two wedding cakes are. with both the smell and the look of the buds. I will post other updates with photos in the coming days! Thanks fam for the support! 💚
Likes
20
Share
Venga familia que ya viene la cosecha de estas Apple Fritter de RoyalQueenSeeds, que ganas que tenia ya de darles machetazo. No veas que pinta que tienen estas plantas. Las flores aparte de prietas se ven bien resinosas. a sido una genética con la que disfruté mucho cultivarla, es algo complicada cultivarla pero merece la pena si eres cultivador con experiencia no te será problema cosechar. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.