Likes
Comments
Share
@Kindbudz
Follow
This was the most beautiful grow I have done to date. There were a few mistakes I made along the way, like not defoliating enough and some over topping but I still highly impressed with the results. Looking forward to growing this again.
Likes
9
Share
So this shit really stinks. I threw up trimmer her twice and had to leave the room for a bit. She's a solid 17% THC with very strong Cerebral effects. I have a high tolerance and typically love to seek out high THC, but with the terpene profile of this girl, it's hard not to indulge. Check out all of these active terpenes found in the lab test: Total Terpenes =1.72% Terpinolene 0.4% beta-Myrcene 0.37% beta-Pinene 0.1% Linalool 0.1% D-Limonene 0.09% Caryophyllene Oxide 0.09% alpha-Pinene 0.08% delta-3-Carene 0.07% Eucalyptol 0.07% trans-Nerolidol 0.07% Camphene 0.06% beta-Ocimene 0.05% alpha-Humulene 0.05% cis-Nerolidol 0.05% gamma-Terpinene 0.04% alpha-Terpinene 0.03%
Likes
62
Share
@nonick123
Follow
Día 8 (28/10) Subo a DLI 20 Spray solo H2O RO en el top del sustrato Retiro la cúpula de humedad, porque una de las CBD Auto 20:1 tenia el tallo ligeramente doblado por falta de resistencia Sin la cúpula y con el ventilador a la potencia mínima (1/10), van a tener una suave brisa que va a hacer que se fortalezca el tallo! Día 9 (29/10) Las plantas se han estirado mucho y se tambalean un poco Creo que deberían haber tenido un DLI más alto desde el principio! Día 10 (30/10) CBD Auto 20:1 y LSD-25 Auto se encuentran "tumbadas" porque el tallo se ha estirado mucho! Hago un soporte casero con una brocheta de madera + alambre + clip de enrejado para mantener los tallos verticales! Spray solo H2O RO en el top del sustrato Día 11 (31/10) Las plántulas se muestran verticales y felices! Una de las CBD Auto 20:1 está mostrando un desarrollo muy rápido! Spray solo H2O RO en el top del sustrato Día 12 (01/11) Spray solo H2O RO en el top del sustrato Día 13 (02/11) Las plántulas se están estirando mucho! Creo que las falta DLI Subo el DLI a 30 Spray solo H2O RO en el top del sustrato Día 14 (03/11) Introduzco la 1ª BioTab a 5 cm de profundidad, lado derecho 1er Riego! 750 ml de H2O RO + ORGATREX 5 ml/L + BACTREX 1 g/L 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/
Likes
14
Share
Last Update: This week I haven't do any defoliation, that make me dying😂 This girl pistil burned extremely I think because i use spidermite killer haha This is around 3 week of flower i starting smell like umm fake lemon or something.
Likes
Comments
Share
@Budtoker
Follow
Bud's don't seem too big yet. Took a while to show pistils once I'd switched to 12/12 so hope they're just a little slow. Plant growing in soil is smallest but has fattest Buds.
Likes
4
Share
Lovely weather this week had her dry out and fed her then I defoliate and started training her lower branches. I started seeing pre flowers but I will keep her in veg for anther 2 weeks.
Likes
1
Share
These are getting ready to go into flower around end of july early au
Likes
17
Share
@Lazuli
Follow
Very intense high, hits very fast and long. Im not stoned but still sleep like a rock after a few hits
Likes
47
Share
@AsNoriu
Follow
Day 50 since seed touched soil. They overgrew everything !!! Cookie is nuts, so stacked, always happy, leaves are on healthy part, but could eat more ;))))) . I think i was late with top up, they developed fast and used a lot. I check run off for ppm, but thought 800 still ok, it was not. So big last top up !!! ALL NUTRITIONS ARE GRAMS TO POT LITRES !!!! Neutralise is in real measurement only. Great White - 3 g each pot Biosys - 3g each pot Charge - 30 g each pot Life-Cycle - 60 g each pot Bio-Blend - 100 g each pot Watered straight after, 3.5 liters went in. Some girls are almost brushing Mars Hydro TSL2000 and i see no issues if air is moved and temp with humidity allows it. Great light, plants grow very well, too well ;)))) will do new clearing after two waterings, want girls to eat first, make bigger roots, then i will resize again to concentrate more on tops. MARS HYDRO TSL2000: 300W, Flower 2'x4', Veg 3'x5' It's recommended for beginners. Low-budget & high-efficiency. Took down first time ever LST while still growing. Needed space of pot, for last top up and i think they will breath better without, branches are stiff, i would add silica to feed at such time, to stiff them, but i go with one line only, just full beans ;))) Happy growing !!!
Likes
5
Share
This girl is loving life right now since her burn. Her root system has flourished since she was transplanted in her solo which she has left on 4.15
Likes
35
Share
@Eryan
Follow
Day 1 Never grown before, but always liked plants. Especially plants like these 😊 Seeds came today. Only one will be grown for now (Bloody Skunk Auto). The seed was slightly scraped (purposefully), and then placed in distilled water. Seed sank to the bottom with a little push after 6 hours. Hopefully that's a good sign :) Seed was then taken and put into rooting medium. Currently lights are on 24/0 to warm the area surrounding the seed. Tomorrow temperature/humidity measurement will be set up. Day 2 Was able to measure the temperature. It's about 22 C. Natural humidity is a bit low in the area (35%), so a humidifier is being used occasionally to increase that. Seed has sprouted now (15 hrs after being put in the rooting medium), maybe in two days there will be some real growth 😊 Day 3 Root looks like it's off to a good start. Positioning seems a bit off though. Will keep an eye on it for the next couple of days. Day 4 There was a surprise waiting today 😁 Plant pushed through the piece of sponge at the top without a problem apparently. The light has been switched to a 125W 5500K CFL, for now without any reflector. A bit worried that this might be too strong, especially for a seedling. However there aren't other 5500K or higher Kelvin value lamps available, so going with this one for a couple of days. If there are problems, will go back to just a collection of 2700K bulbs and hope the plant survives haha. Got a heating pad, so now the temperature is being kept around a comfortable 73-76 F. Night temperatures should drop to around 66-68 F. Lighting schedule has been switched to a 20/4 schedule, to allow for better plant development. Will probably stay with this schedule for the first couple of weeks. Could also see the taproot poking out of the Root!t sponge. Not sure if that's going to bad for this root to be exposed to light at this stage. Once (if) the leaves start to get wider than the Root!t sponge the plant and sponge will be transplanted to a small 1 Liter pot. If the roots continue growing but the plant stays stunted then it will also be transplanted. Andddd....got nervous about the 125W lamp. Decided to switch it out for the previous lights (two LEDs, two CFLs, all at 2700K). Total lux value is about 10000 measured by the seedling. Seemed also like the seedling might have been craving some water, so gave it a few drops. It hadn't been watered since being planted. Hopefully not over-watering here... Day 5 Seedling has grown by another centimeter. Leaves haven't really changed that much. Nevertheless, decided to put the seedling in a slightly larger container. The cup was taken and filled with some potting soil (Compo Sana Anzuchterde) and the Root!t sponge put into that. Did this because the tap root was poking even further out of the sponge and didn't like that. Gave some more water, mainly in the lower section of the soil. Will not water again for a few days unless it seems really too dry. Don't want to over-water 😑 Day 6 Seedling doubled in height. Starting to get concerned about stretching. Read conflicting information about the optimal humidity for seedlings, but most seemed to say that less was better, and a humidity dome not necessary after sprouting. One source suggested that seedlings stretch when under a humidity dome. So that's been removed. Switched to the 125W lamp as well in case the seedling was stretching because of not enough light. Added a fan for a breeze to occasionally move the seedling...hopefully this will make the stem a bit sturdier. First set of leaves has begun to develop a bit more..but it seems a bit slow. Might just be being impatient 😄 Day 7 Not much has changed. Soil is getting to be dry enough where watering again should be ok. So that will be done tomorrow morning, with a small amount of BioBizz RootJuice.
Likes
13
Share
approaching 3 weeks from when clones where taken there building up great done bit a defoilating super cropping and topping a newby to these techniques but seem to be doing well can see the increase in nutrient has really got them growing now
Likes
15
Share
@BruWeed
Follow
☘️06/04 - Estoy utilizando el método que recomienda BSF Seed para la germinacion. ☘️Dentro de 24hs voy a ponerla directamente con papel para que germine y poder colocarla en su maceta. ☘️En estos dias estaré subiendo más imágenes. ☘️07/04 - Coloque la semilla germinada en el sustrato, antes de meter la semilla le agregue AEGIS Microrrizas, sirve para una mejor absorción de agua y nutrientes del suelo, proporciona a las plantas importantes beneficios,etc. Es muy bueno y siempre lo utilizo de este modo. ☘️Estoy utilizando una maceta de Root House de 10L. ☘️El sustracto que estoy utilizando se llama Nube Verde, la composición que trae es: turba de categoría, perlita, humus, compost, tierra, dolomita y verticalidad. ☘️La plantula ya brotó, todavía sigue teniendo por lo que veo pedazos de cascara, en estos días se caerá. ☘️Por el momento tiene buen aspecto. ☘️El 25/04 ya entra en etapa de crecimiento. ☘️En el día de hoy 19/04 esta midiendo 3cm. ☘️En estos dias subiré más imágenes de como viene.
Likes
14
Share
6/22 looking good after I tried to spread her out more. She responded well 6/26 sexy ass plant
Likes
12
Share
@MH_RDWC
Follow
Everything went well. Only added a little hydroguard, silica blast and water throughout the week. They’re getting a little fatter and a lot frostier.