Likes
Comments
Share
- Humidity was low beginning of the week and the temperature was quite high. But, I still managed to hit the ideal values. Towards the end of the week, the average humidity in my city was at the high 70s which reflected into the tent. - VPD fluctuated this week between 1,0 and 1.65 kPa, averaging at 1,42 kPa. - Tent temperature fluctuated around 24 at night and 28 Celsius at day time, averaging at 25.5. - Humidity did not fluctuate as it used to beginning of the week but it spiked crazy towards the end, averaging at 56.4 which is much better than the last week. - I am now giving standard 6.4 Ph Water. - Frosting slowed down but the flowers are getting bigger. - Stickiness and smell keep getting stronger.
Likes
7
Share
@PotCasso
Follow
Week 8 Flower Full Bloom Watered in at 600ml
Likes
4
Share
I finally got my LED light in and installed. The plants are in the first week of flower and are adapting well to the light
Likes
11
Share
@Jacks_Pot
Follow
The 3th week into the 12/12 cycle went smooth. I've got the impression that the Pineapples aren't stretching much. The pre-flowering stage has changed into the actual flowering stage. I think it will take about 10 weeks of 12/12 to get these Pineapples ready. I've done some final pruning and removed some leaves above the screen that were blocking light for lower shoots. Smell is coming in so this week I've placed the carbon filter in the tent. It's still the Can – Lite 600pl filter that did a great job in my previous run. This was the feeding shedule of this week. Day 1 → Each 1100 ml (0.29 gallon) tapwater with Plagron nutrients (see above for which and how much) Day 2 → Dry Day 3 → Each 1100 ml (0.29 gallon) ph adjusted tapwater (ec 0.46– ph 6.1) Day 4 → Dry Day 5 → Each 1150 ml (0.30 gallon) tapwater with Plagron nutrients (see above for which and how much) Day 6 → Dry Day 7 → Each 1200 ml (0.31 gallon) ph adjusted tapwater (ec 0.48– ph 6.1) The week started with the cobs still at the same height and power as last week ended. That was 240 watt and 46 cm/18.1 inch → (PPFD 750/DLI 32.4) On day 54 the power was raised to 252 watt at 45 cm → (PPFD 789/DLI 34.1) Temperatures stayed between 20 – 26.5 °C ( 68 – 79.7 °F) and humidity levels between 50 – 65 % Till next week! Do you want to grow this strain? 👉 https://www.barneysfarm.us/pineapple-chunk-weed-strain-15 👈
Likes
34
Share
Feb 1st Plants are stretching out with about 2” growth last week. The root structure is awesome. I will be transplanting to individual pots soon. I am going to try out an autopot system which is still considered hydroponic although I will be using coco/per light medium Started them on 75% strength nutes Feb 3rd Moved the plants over to my new autopot system Feb 4th Plants moved to the new medium coco/perlite with very little shock. With in 18 hrs all 3 were perky again
Likes
34
Share
Welcome to week 11 I feel like I may be out of the woods as far as worry is about pollination so far she shows no signs of being pollinated. I have continued with my LST scrogging in order to keep the canopy even and not let it get too high I don't want to keep the distance from the light. Other than that she shows no deficiencies and is growing very nicely if a little slow LOL
Likes
49
Share
The week went well. She has a funk to her now that as soon as I kill the fan it smacks you right in the face. Some of the pistils are beginning to amber. Just waiting for her to fatten up and finish. I believe this will be my biggest producing auto yet.
Likes
57
Share
@nonick123
Follow
Día 48 (10/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 Día 49 (11/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,5 ml/I +TopBooster 0,2 ml/l - pH 6.2 Subo el CalMag a 0,5 ml/L porque BPPA no se recupera, y el resto muestran inicio de deficiencia Día 50 (12/06) Está lloviendo mucho por aquí. Menos mal que tengo el techo de policarbonato en mi invernadero casero. Hoy no necesitan riego Día 51 (13/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,5 ml/I + TopBooster 0,2 ml/l - pH 6.2 Día 52 (14/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + CaMg-Boost 0,5 ml/I + TopBooster 0,2 ml/l - pH 6.2 Día 53 (15/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,5 ml/I + TopBooster 0,2 ml/l - pH 6.2 Día 54 (16/06) Riego con Té de Floración - 750 ml / planta 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
4
Share
@MistaOC
Follow
************** 13.03. Day 1 ************** 🤞🏼😎 I have new cuttings. Sour Frootz from Karma Genetics. I planted the cuttings in 0.2 L pots. I only applied fertilizer to the large pot. So Let’s grow again 💚💯 ******************************************* 18.03. Day 6 sprinkled with bactrex and transferred into the large pots *******************************************
Likes
20
Share
@Dunk_Junk
Follow
Chopped during the week and drying now............ The first pics are taken just before harvest. Video is as it is drying out. Dry weight 140 g!!!!!!!!! Very pleased with this. Nice genetics, I'm excited to do more strains for Barneys Farm.
Likes
24
Share
The calmag issue went on, so I kept adding a bit more every time. All the new growth is looking strong. This week was also time for their first LST. First at the start of the week and then again at the end of this week. They seem to do well.
Likes
10
Share
@RFarm21
Follow
20 agosto - feed day Ready for harvest!
Likes
4
Share
@GroloCup
Follow
Another week and the root growth is letting me know we're close to transplant time, which is a good timing with my tent getting ready for a new cycle. I pulled a few lower leaves off her to keep that energy pushing up to the top. Based on the leaves, she appears to lean to the OGKB in her lineage, so this should be a nice candidate for a scrog to get the most of the business of the strain. The hardiness of this seedling is definitely a testament to the breeders efforts in offering quality feminized genetics. Check them out on Strainly or see their site for their other offerings.
Likes
8
Share
@Dmon013
Follow
The last week before cutting, I still fertilized for the last week, I focused on the expressway sugar and the loading of carbohydrates well. Still No-till Living soil Microorganisms 💚
Likes
20
Share
Likes
4
Share
@pzwags420
Follow
On day 1 I changed out my reservoir. I lowered my nutes to 650 ppm(25% reduction). I adjusted the PH down to 6.1. My left plant has some burnt tips from either PH shift or over fertilization. My hope is that the lower ppm will help to resolve the issue before it spreads. On day 2 I adjusted the reservoirs PH from 6.3 to 5.9. On day 3 the reservoirs PH is 6.0. I installed my new 200 watt HLG Rspec. I adjusted PPFD readings to 700-1300 PPFD on all tops. On day 4 I adjusted the reservoirs PH from 5.8 to 6.2. On day 5 I adjusted the reservoirs PH from 6.4 to 6.0. I diluted my nutrients in my reservoir by removing one gallon of nutrients from the rez and and adding 2 gallons of straight tap water to the rez. This brought the nute concentration from 770 ppm to 540 ppm as the plants will be entering the ripening stage in a few days and they have too much nitrogen judging by the extremely dark green leaves and burnt leaf tips on some branches of the left side plant. The buds seem slightly smaller then my last run which may be due to an excess of nitrogen and maybe not enough light as some of my tops are taller then the others making proper PPFD challenging. All in all the girls are coming along nice and I look forward to the final weeks of flowering 😀 On day 6 I adjusted the reservoirs PH from 5.9 to 6.2. I think I have halted the nute burn as I haven't seen it progressing any more on the leaves. I will continue to monitor closely during these final weeks. The trichome production is increasing with some trichs on top of colas starting to go cloudy. The pistils are turning brown with roughly 40-50% are turning brown all signs I'm getting closer to the harvest window 😆. I dimmed my light to give 600-1000 PPFD to tops. On day 7 I reduced my temps to 75 during the day and 68 at night. I adjusted the PH of the reservoir from 6.6 to 6.1. My reservoirs ppm was too high so I diluted the rez with 2 gal of tap water. This brought it down to 480ppm. The average ppfd to all 14 tops is 604 with no top receiving more than 1000 ppfd
Processing
Likes
12
Share
A beautifully sticky plant. Flushing