SUNDAY 4/21: I fed them about 1/2 gallon each today. Will take some photos tomorrow- MONDAY: Had other stuff to do today, so they only got a once over. TUESDAY: I rearranged them and took some photos today. WEDNESDAY: I rearranged them and took some photos and a video. Will water her tomorrow- THURSDAY: I watered with about 1/3 gallon and included some terpinator, calimagic, and beastie bloomz. She looks great..wasn't bothered by the heat last week as much as the WW XXL. She should finish strong if I can get the temps under control. She's got a lovely aroma.😀 FRIDAY: I made some improvements to my fresh air a/c intake in the tent that dropped the temp a couple of degrees, and the new dehumidifier is keeping the RH right where I want it..45-50%.👌 This allows the evap cooler to be more effective at cooling as well...above 50% RH and it's basically just a fan..

all going well. Next week I think I will harvest the Gelato Dream...

Harvest was great, got 6.5 oz off the first plant, cured and 7 1/4 oz off the 2nd plant, dried and cured. I never weigh wet, idk why lol.. jus too in the moment I guess.

Super burnt lol. Ooops I'll still finish her off and hope for the best. Should still be some decent smoke 👌

Last week I fought some yellowing of the leaves. Did some small adjustments on PH to keep it in the 5.6 range. Seemed to stop it from progressing. For Week 3 Veg I topped the plants. I plan to flip the lights at the end of week 3 and move into flower. Day 15 I continued to have yellowing leaves even though I had everything looking right. (Added Pic). I decided to look into the PH to see if I was having issues with it. I have a meter in the water 100% of the time taking a reading every 1 sec. It all looked right. But I decided to Calibrate it in 4,7,10 solutions. Found out that my meter was off. So new to the check list is to calibrate the meter before each grow. I was thinking my PH was High, when in reality it was low. put in some PH up to get it back to 5.5 and over the last 16 hours things look pretty good. Leaves look darker. Day 17 Things are looking good. Leaves are getting darker and new growth coming in. Day 18 Turned room temp down to 73F from 76F. Fearing it is warming up my res tank too much. Day 19 Starting to get yellowing again. checked everything and can't find a good reason for it. Did notice some cloudiness in my res tank. Added 2 ML/Gal of peroxide. have Hydroguard on the way to help. I'll be adding more fans this weekend. I have light air movement currently. Also found a few spider mites and sprayed Greencleaner to all plants. Current environment settings: Room Temp 72.74 F Room Humidity 63.63% (After spraying, Trending down). Room CO2 589PPM Tank PH 5.70 Tank PPM (500 Scale) 953 Tank Temp 74.05 F Day 20 Recalibrated my EC probe just to be sure it was also accurate. wasn't off by much. Dialed back my flooding to every 5 hours to encourage Rooting. <-- Strong roots = strong Plants Sprayed for mites

Flowering nicely now. Not drinking a ton of water but I attribute that to lower temps lately.

I’ve lost track of how long it’s been really. Few weeks I suppose

16th of April day 37 some defoliation done to open up the inner nodes let them get some more light to grow up

Clones con 14 días, ya todos enraizados, de las 3 variedades Medical Mass CBD de Royal Queen fue la que colonizo mas rápido, seguida por Medikit de Budhaseed y por ultimo Tangie de BSF, a pesar de que fue la ultima en colonizar la cantidad de raíces en la Tangie era mucho mayor y con gran carga radicular. Raíces de Medical Mass CBD mucho mas grandes y con gran cantidad de radículas. Promete!!

This was my first grow and I did a bunch of research but I mostly figured it out as I went and I really enjoyed this strain. It was very resistant and took about 90-92 days from germination to harvest. The strain seemed to bounce back extremely well even after a heavy trimming. Did not really run into any health issues with the strain other than what I diagnosed as Leaf Septoria which is caused from to much humidity and not enough circulation. But overall will grow again and was very accurately advertised by Canuk Seeds. Ended up with 256grams from this grow which I was pleasantly surprised with. Saved all the shake and made Cannabutter and Bubble Hash. Both turned out okay but with room for improvement in the future.

I’ve switched to a custom fertilizer blend, flushed all the plants with the new solution until the runoff matched the input values. I’ve transplanted the original 3 seedlings into 1 gallon bags of promix cx (coco). Topped them and rooting the tops to make clones for this mom hunt. 1 of the originals (gorilla glue) has failed to thrive and is stunted at the 3rd node.. I’m ready to toss her. The 4 replacement seedlings are also ready to transplant but not quite ready to top for cloning, needs a little bit more stem growth before I prune back to the 3rd node. I’m very happy with these ladies so far. I could send the first 3 to flower right now but I’m going to wait for the other 4 to catch up first so I can run them all together.

Que pasa familia, finalizamos segunda semana de floración, no veas que color y que vigor, están muy sanas, se agradece la luz del LED. Controlamos ph 6,5 temperatura y humedad dentro de los parámetros correctos. Añadimos bud candy para ir aportando a las flores los nutrientes necesarios para una mejor formación y sabor. Por lo demás nada nuevo, todo va bien, entre riego y riego son 72h lo que pasan , en vez de 48h como pasa con el sodio. También se agradece en ese aspecto. Un saludo fumetillas y muy buenos humos 💨

Starting week 4 of Flower. I expect things to slow on the upwards growth as the plant shifts focus onto the bud development. Ran out of potassium silicate. Will be continuing with out it for the rest of the grow. Ran out of potassium silicate. Will be continuing with out it for the rest of the grow. Started to notice a slight smell when leaving the door open and returning after a few minutes. This started in the last couple days

I'm super happy and really looking forward to trying the Sherbelato. But I'll have to be patient for another 2 weeks

Week 21 (30-11 to ?????) 30-11 Today i harvested her! I removed all the fan leaves and left the buds on the branches to dry. 1-12 Temperature: 16°c to 19.5°c Humidity: 50% to 56% 2-12 Temperature: 14.7°c to 18.5°c Humidity: 54% to 57% 3-12 Temperature: 16.1°c to 18.9°c Humidity: 54% to 59% 4-12 Temperature: 15.5°c to 17.5°c Humidity: 57% to 62% 5-12 Temperature: 15.2°c to 17.7°c Humidity: 60% to 71% 6-12 Temperature: 16.5°c to 17.8°c Humidity: 60% to 66% 7-12 Temperature: 16.4°c to 17.9°c Humidity: 57% to 63% 8-12 Temperature: 16.6°c to 18.5°c Humidity: 56% to 60% 9-12 Temperature: 16.9°c to 19°c Humidity: 57% to 62% 10-12 Temperature: 17.4°c to 19.5°c Humidity: 60% to 64% 12-12 Temperature: 17.9°c to 20.1°c Humidity: 61% to 76% 14-12 The buds felt dry enough and ready to get their final trim before they go into the jar for curing! Trimjail it is! 16-12 Today i finished trimming everything. This is the end result: Dried bud: 116 grams. Dried trim: 23 grams. Thats over 1 gram per watt, and i am very happy with that!! In the curing jar they go! Let me know if you liked my diary and see you all in the next one!

Wow...these plants are just monsters, i have never grown anything like it. I you do not control the growth or defoliant enough you in trouble. Th flowers are growing at a phenomenal rate, looking at the structure, it's going to be dense bud. I have treated the plants again against mildew, it's very crowded in there and is getting more so every day. So far I'm very happy with the strain although not the easiest to grow. If things are going this well at this point...another 4 weeks...😀..its going to be amazing. Stay tuned. 😁

We are at 27 days of flowering now and they are starting to change colors now. The gorilla is really turning yellow. I could of gave her a bit of nitrogen but this is just a practice run with my custom bred seeds so I'm letting it go. Alot of frost showing now. They are loving the new fc4800 and 8x8 Grow Tent for sure🤘 another couple weeks and I should know more about the smell of them. Right now they smell more like the nuken but they are slowly changing to have their own unique smell. None of them smell like what the parents did. Except at the beginning of getting frosty they all kinda smelt like nuken. Like marshmallows. The monkey dough nuken smells like fruit loops and the gorilla smells like skittles. More than the original skittles does👍 WWW.MARS-HYDRO.COM PROMO CODE: rocknroll Instagram: @marshydropenny Shout out and thanks to: https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids Hers more information on the mars hydro products: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 WWW.mars-hydro.com PROMO CODE:rocknroll Instagram: @marshydropenny https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids Please check out my YouTube👍 Like and subscribe right Now!!! LoL