Recommended
Likes
Comments
Share
The plant was tied extremely low and the net was stretched. The plant was also repotted in an air pot.
Likes
166
Share
@iMeus
Follow
Hello friends! Here’s the skinny on my grow “First Mainline Attempt!”. I’m going to split this up a bit so it’s easier to follow, this will be a long one :) ~ Progress Day 56 ~ There’s been a lot of growth happening since I got this new light from KINGLED, genuinely surprised. I could notice the difference within hours that my little ones where love’n the light! Compared to last week the difference is huge (to me). I was using a Bestva LED light for my grows up to this point. I read reviews and thought that would be the best light (Bestva) within my current budget. But my plants didn’t seem happy, or growing at an expected rate, I thought I was doing something wrong. Well long story short the KINGLED has made a impact on my plants, I can’t believe all I needed was more light. I will post the light specs below if you’re interested. Now i’m gonna jump right into this weeks growth. I’ll separate each plant below and provide details on height and structure. ~ Individual Progress Notes ~ [CBD Blueberry] Height: 6.0" Tops: 8 Notes: Smallest of the mothers, and she has a weird asymmetrical growth pattern, the nodes don’t match evenly, not sure what mutation this is. It could be that this strain doesn’t like being mainlined.. If this negatively impacts the overall yield and quality I will kill off this mother plant and clones. I have 2 more seeds to germ so it’s not a total loss. [Mazar] Height: 8.0" Tops: 8 Notes: This girl is responding the best to the mainline experiment, I’m excited to clone her off later. Nice symmetrical growth :) [White Widow] Height: 6.1" Tops: 8 Notes: I honestly thought she would be the runt, guess not! Though not the biggest she has the phatest leaves and thickest canopy. I can only wonder what the next few weeks will be like. Must clone! [Super Silver Haze] Height: 7.2" Tops: 8 Notes: Another that’s responding well to the treatment. I’d like to clone her of as well as soon as there is enough growth for me to collect samples. I’ve only had this strain once so I’m hoping this will be as good or better, who knows :) [Purple Urkle #1] Height: 8.0 Tops: 8 Notes: I lost the clone to this girl, I'll need a replacement(s) to test before I flower, more stretch than the others, hmm (both 1 & 2 need to be tested via clones) [Purple Urkle #2] Height: 9.0 Tops: 8 Notes: This girl is very stretchy and her clone is insane! Thickest stalk out of any of my girls? I don't know why but she is phat, love it. Check out my diary "A Few Clones" if you're interested in this possible monster of a plant :) ~ Concerns ~ My only real concern at this point is mite and insect control. This grow is in the garage so that’s not especially easy to avoid. Staying vigilant and nuke’n everything that moves (without harming my plants) is working so far. Those pesky mites and other fan favorite insects! I swear I’ll get my revenge >:( ~ Final Thoughts ~ Other than the local mite population making claims to my property, I’m very satisfied with this weeks progress. Installing the ducting and fans was the hardest chore I had to do, and now that’s taken care of. Before I finish up I want to apologize for not being as detailed and thorough these past few weeks. Now this is a bit personal but I’m willing to share it with ya’ll. My mother has stage 4 cancer, yeah… It hasn’t hit me like a train yet, but I’m still suffering. I’m trying to prepare myself in the event she doesn't make it through chemo and that’s a tough pill to swallow friends. Hopefully I can produce some cbd medicine for her to ease her pain, and help to improve her quality of life. I’m going to close this weeks update by saying thank you to all of you wonderful people, the support and comments make my day, I appreciate em all. Much love, Meus [Light Specs] Brand: KINGLED Series: King Plus Model: 3000 watt Replacement: 2000 watt Avg Power Draw: 615 watt Input Voltage(AC): 85-265 Volts Frequency: 50-60 Hz Lifespan: 50,000 hours Total LEDs: 300 Core Coverage Area at 24": 7.8' x 7.5' PAR at 18": 760 μmol/m2s Lumens: 23454.6 Weight: 15.8 lbs
Likes
11
Share
@Chow_13
Follow
July 22 - Temp(High/Low) 30/20 Rain(mm) 0.0 July 23 - Temp(High/Low) 31/20 Rain(mm) 0.0 July 24 - Temp(High/Low) 29/21 Rain(mm) 6.0 July 25 - Temp(High/Low) 26/17 Rain(mm) 0.0 July 26 - Temp(High/Low) 25/16 Rain(mm) 0.0 July 27 - Temp(High/Low) 27/17 Rain(mm) 0.0 July 28 - Temp(High/Low) 29/18 Rain(mm) 0.0 Good week. Had a little shower in the 24th and she is just starting to dry out.
Likes
24
Share
@Indoor55
Follow
They are starting to flower. I am doing LST to 3 of this girls and i topped the other one because i want to see the difference. The topped plant is starting to show some pistils and i'm afraid maybe she won't have enough time to recover from the stress, but the other three are looking good so far.
Likes
44
Share
Here we are day 47 a veg , and we're getting pretty close to flipping her to flower.. i'm thinking the first of the year i'm gonna put her in the 2.3x2.3x63 Mars hydro tent where she could blossome, and have the tent to herself.. Once I move her over, i'm starting a new auto run the beginning of the New Year .. I hope everybody had a Merry Christmas christmas and I pray you have a safe New Year.. God bless everybody and happy growing ✌️. So it not letting me add my nutrients so here it is.. .75tsp silica.... .6tsp cal mag and .9 top of maxibloom PH 6.2..once in flower the Ph will go to 6.5..✌️ Day 48 and I finally moved this girl to her very own tent ( mars hydro 2.3x2.3x63 ) getting ready for flower !! I'm gonna give her probably a week to really fill in, and then we flip to 12 and 12 .. so far, this plant has been a breeze to grow.. It seems like that's all she wants to do is grow, and i'm here for it.. God bless everybody happy growing ✌️. On day 50 we flip two flower as you can see, she is going to be a nice girl.. Big shout out to Zamnesia Seeds they are seemingly going to be 2 for 2 .. the watermelon candy from them is the best looking flower Ive grown so far, and this girl has been strong and hearty from the beginning, so I have very high hopes..✌️ https://www.zamnesia.com/us/35-cannabis-seeds/368-zamnesia-seeds
Likes
Comments
Share
Vamos familia, actualizamos la primera semana de floración de estas Black Rainbow de Seedstockers, salieron las 3 de 3, 100% ratio éxito. Aplicamos varios productos de Agrobeta, que son increíbles para aportar una buena alimentación a las plantas. Temperatura y humedad dentro de los rangos correctos dentro de la etapa de crecimiento. La tierra utilizada es al mix top crop, por cambiar. De 3 ejemplares seleccioné los 2 mejores para completar el indoor y trasplanté directamente a macetas de 7 litros, cambien el fotoperiodo a 12/12 y aplique una buena poda de ramas bajas, se ven bien sanas las plantas, tienen un buen color y progresan a muy buen ritmo por el momento, ya marcaron las preflores. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨
Likes
20
Share
Welcome to the Week 10, Day 70 update for the Sweet Seeds Cream Mandarine XL Autoflowering grow. Not much to talk about this week as the last two plants remaining in the tent are on cruise control to harvest. I used fertilizer for the final time at the beginning of Week 10 and it’s flush time for these plants until the big chop! They are still being watered every 4th day and they are still drinking about 3.5 litres per plant per watering (0.875 of a litre per plant per day). These remaining two plants have virtually no Powdery Mildew so I am only defoliating as needed if the leaf is already dying. All of the pistols/hairs have turned orange and are receding back into the buds so I’m guessing that harvest will be in Week 11. I have included a brief video above with my photos showing pretty much everything used during this grow. I wanted to give people a quick look at how simple it really is to grow and harvest your own high quality cannabis. Hope you enjoy! I will post next time with my final harvest update- this might take a short while as I generally prefer to know the final dry bud weight as well as having some great photos of the dry, uncured product. Until then…
Likes
14
Share
@tiasmaaa
Follow
soo little update : the 2 plants on the right side are probably not Jelly Pie #7 but rather Original Clon from Blimburn... there was a mistake when I got the cuttings. On the other hand the 2 plants on the left, I'm totally sure that they are so strong smelling and so pretty
Likes
13
Share
Well after splitting the Girls up due to space it’s looking like the HPS Ladies are almost ready looking we’ll ahead of LED ones also buds are fatter with HPS but would say the LED ones look healthier looking if that makes sense
Likes
2
Share
Easy to grow, beautiful structure and plant. Big frosted, dense buds with very good odour 🤤. Would 100% recommend.
Likes
12
Share
Letzten 7 tage unglaublich an masse und höhe gewonnen echt atemberaubend das anzusehen ,hab das zelt gut voll bekommen mit wenig plants bis jetzt alles super. Habe heute meine neue Led lampe bekommen bin positiv begeistert.Habe 600watt durch eine 1200watt ausgetauscht.
Likes
20
Share
Looks like buds are forming nicely, getting volume slowly. I have problem with some deficiency, i started adding calmag last week, and lowered the nutes, no changes for now yet, all old leaves look horrible, new ones have the tip burned and twisted up. Starting to smell more, its noticable in the house, buds are really sticky if you touch it. I am guessing around 4 weeks till finish, the 4th plant probably later, is about 2 weeks behind, but is the biggest. Buds are just stacked, interested to see if those are going to be all one big bud, it is easier to see it in the video i attached. Cheers!
Likes
24
Share
This week they are all booming after continuous LST. The calmag issues went away after staying at 0.4 ec for a while. All new growth is looking good. Starting adding Cannazym to get rid of any dead roots that have been formed around the edges now. The time-lapse for this week is only for the last few days as I had some technical difficulties. Still feeding at around 0.7 ec total. Also added more fans this week to circulate the air better. Three run every 30 minutes for 3 minutes to blow out 100% of the dead air from the canopy. Another fan is blowing continuously. They start to increasingly smell now. Very strong yet subtle right now. Oh and in case anyone noticed: One of them was a mutant (very weirdly placed growing nodes and other unusual behaviour) so I had to throw her pre-emptively. The rest of the girls look ready to for the ride though!
Likes
1
Share
That was one of the strongest stuff I’ve ever tasted 68 gr dry buds
Processing
Likes
29
Share
I have been super excited with everything up to this point . I have made all my preparations that I think need to be made and did some trial runs on my environment. I starting preparing around the 15th of January and my set up was complete around the 19th of February. I spaced my purchases out based on budget constraints. I wanted a cheap and efficient grow area. Some thing I paid more for because through all the research I did I felt quality was more important. If you are as excited as I was, you get pretty anxious when awaiting order status when you first order your seeds. You should remember you are ordering from an online seed bank not amazon. Most work Monday - Friday and are in a complete different time zone. I ordered my seeds from seed supreme Seedbank. I placed my order on 31 January and mailed money as directed. This was the scariest part for me especially when I didn’t hear anything back. I finally received a email on the 12th if February saying my invoice was paid and then subsequently mailed out on the 15th and I received on the 20th. One thing I would like to note that recommend to anyone mail cash is to make sure you spend the extra cash and track your payment. I’m currently germinating all five GSC I received I placed them in water for the first 24 hours and then a paper towel for approximately 40 Hours. I’ll add links to most of the items I purchased below. Some items I purchased through offer up and let it go app to save money. VIVOSUN 48" X48" X 80" Hydroponic... https://www.amazon.com/dp/B07GNBCVPZ?ref=ppx_pop_mob_ap_share LED Grow Light 1000W Full... https://www.amazon.com/dp/B074MBP32M?ref=ppx_pop_mob_ap_share AcuRite 00613 Humidity Monitor... https://www.amazon.com/dp/B0013BKDO8?ref=ppx_pop_mob_ap_share Hydrofarm Grow!T Premium Coco... https://www.amazon.com/dp/B01DA4PZI4?ref=ppx_pop_mob_ap_share iPower LGTESTSOIL 3 in 1 Soil... https://www.amazon.com/dp/B075LRY5M7?ref=ppx_pop_mob_ap_share Unco Industries (WWSB15LB) Wiggle... https://www.amazon.com/dp/B00062KQ42?ref=ppx_pop_mob_ap_share General Hydroponics pH Control Kit https://www.amazon.com/dp/B000BNKWZY?ref=ppx_pop_mob_ap_share VIVOSUN Air Filtration Kit: 4... https://www.amazon.com/dp/B06XFRNPR8?ref=ppx_pop_mob_ap_share VIVOSUN pH & TDS Meter Combo, 0.05ph High Accuracy Pen Type pH Meter & +/- 2% Readout Accuracy 3-in-1 TDS EC Temperature Meter https://www.amazon.com/dp/B06XKMH86J/ref=cm_sw_r_cp_api_i_2xyCCbK4MKNN4 Botanicare CAL-MAG Plus Plant Supplement 2-0-0 Formula, 1 Quart https://www.amazon.com/dp/B004JKBMRW/ref=cm_sw_r_cp_api_i_LyyCCbY8SMFTK Century 24 Hour Plug-in Mechanical Timer Grounded https://www.amazon.com/dp/B00MVFF59S/ref=cm_sw_r_cp_api_i_ozyCCbHG8Q2PB Day 1 - 2/23/19: I planted my seeds today about a fingernail length down with tap root pointed and gave a light watering with plain tap water at a PH of 5.8. Day 2 - 2/24/19: Nothing new to report no activity on the surface, misted watering at 5.8 PH. Day 3 - 2/25/19: Plant number 1 which had the longest tap root broke the surface I started a time lapse on it to cover the first moments of birth 😭 daddy is already so proud lmao. I have another light watering today with my humidity domes on, the intent is to have the plants roots work to get the required water and hopefully promote root growth. I also added 1ml of Rapid start and diluted into 1 gal. Day 4 - 2/26/19: Checked the status this morning prior to work and two more have reached the surface only two more remaining which I suspect will reach by the time I make it home from work. Misted this morning pot was looking pretty dry with the exception of the humidity domes, which I removed on all the sprouted seedling. I intend on shifting to a 20 on 4 off cycle and starting my other fans. Day 5 - 2/27/19: All five plants have broke the surface. I did a normal watering this am still utilizing the dome to avoid watering on top of the plants. I lowered the light again some of the early sprouters we stretching a little more than I wanted and appeared leggy to me. Day 6 - 2/28/19: Nothing really to report today. Excited for the name reveal tomorrow. I did a light watering. I played around with my ppm meter and ec I definitely plan on using in conjunction with my first feeding this weekend. Day 7 - 3/1/19: Was watering this morning normal levels. I also mixed a new feed to be ready for them tomorrow. While I was watering # 5 fell over I accidentally tipped it with the spout. I grabbed some left over soul to help prop it up hopefully she is ok.
Likes
1
Share
Muy buenas noches muchach@s.... Bueno, comento!, segunda semana de crecimiento de las red cookie gelato! 🌱 Cómo ven hoy fue día de selección de las q para mi, novato, fueron las mejores para trasplantar a estas macetas q ya son las definitivas, las regué con ½lts de agua c/u, prendí el otro led y ahora hay una fiesta ahi dentro q no saben, terrible!!.. 😎🕺🏻💡 Bueno, ya las ven, están re lindas... Así q ya no las molesto más... Ahí están trankilamente... La semana que viene les cuento más... Buen finde y buenos humos para tod@s... 🔥 💨💨💨 🇪🇸🤝🏻🇦🇷
Likes
5
Share
Plants are growing nicely, I think I overwatered a bit on day 20 and on day 21 they were a bit down, but at the end of the day they were looking much better though,I just introduce some nutrients on day 20( 1ml/l top auto) and calmag like always,the ph of the water was around 6,4.LIGHTS are at 50% power right now
Likes
10
Share
Blüten werden inzwischen sehr Harzig und der Duft nimmt zu. Dem Giesswasser wird täglich 1:10 Jauche zugegen. Zu dem jedes zweite Gießen Pro Sugar von Grow Pro ein Kohlenhydrat Blütedünger(von der Mary Jane ein Tester). Zu dem gibt es ein bis zweimal in der Woche Seafeed Xtra von envii. Die ersten Blätter haben sich unten entfernt daher gebe ich gerade wieder Stickstoff zu den Pflanzen. Auch wenn es nur noch diese Woche war danach nur noch Blütedünger. Zu dem habe ich Basilikum gepflanzt, Dill, Ringelblume und Koriander gesäat am Anfang der Woche und zum Ende noch Lupine und Rot Klee.
Likes
14
Share
@MG2009
Follow
03/13/2022 Love the colors on Grape Skunk #1 others are not as purple, again i forgot Biscotti Skunk and lemon og. 03/14/2022 Uploading Biscotti Skunk pic's I'm really loving 3 particular girls this run,all plants are exposed to PW intentionally I need girls that can take PW with no issues and three plants are spotless. The first is the only Biscotti Skunk that was female of 5 cloning for outside run but will do great in basement without PW issues. The second is lemon og spotless, and the third is the grape skunk thats got most color the second tallest of the grape skunks, cloning for testing in New England zone 7 should get at least one if not all 3 to finish before cold sets in.