Day 31 of flower Basically the girls are on autopilot, with the autopots and Gaia green there really isn't much to do, both methods are super user friendly and the basic needs that need to be meet are just ph water in the reservoir every couple days and then watch them stack buds on top of buds...Occasionally I move a branch over to another square in the net to make room but Basically after the last top feeding it's just watch and weight, pun intended....

03/08/2021 2nd transplant for Blue Dream, roots growing fast, might use her for a multiple strain clone mom, her sativa like root system I think would be ideal for this project. Reppoting GSC in am and will post some pics these are before Reppoting,

Hello everybody! everything is just great! even there is nothing to say so much everything is good))) I think it's not long left to wait for the harvest .. 2-3 weeks maximum!)

This week I'm going to talk a little bit about the 2 gal pots I leave outdoors. Since they're going to be indoors now, I've assembled a fertilizer rack and the bottom compartment is perfect for a cage with all the plants I have. With a length of 1.5m, width 65cm and height of 1m, I will use 4 led bulbs 50w and 2 full spectrum LEDs 36w long 1.2m. 272w / ~ 1m2. 2/3:Plant the plants indoors and lst them. 4 led bulb 50w 5/3:Run off all the trees, as it was soaked with rain water when left outside. is still the old nutritional dose. 6/3: Today I received the led light I ordered. I perfect my design and let the tree in the cage out and lst. 9/3:I feel everything is perfect today, I reduce their lighting time to 12/12. I will cut off all the fan leaves from the stem of the 2gal pots and prune all the small branches of the 1gal pot. in this pruning I will trim them as much as possible. It's been 37 days since the seed and I think they're ready for flowering. I need to flower them urgently because in the next 2 months the weather can be as hot as 40 degrees, and I really have no way to reduce their temperature. I would probably have them flower for 7 to 8 weeks to retain maximum resin. a few days before high, I fliming an NL plant, I experimented with this technique and I feel that they have been very successful since the fliming plants have a much larger stump than other plants. I really like this technique, as it will save me the small space I currently have without having toppings. With just a few simple steps I have got a really big stump and still keep the biggest main bud of the tree. I hope each plant can give me 20-25 grams of dried marijuana.

Hello. I'll be harvesting tomorrow. Just a last couple of pictures for the diary. Started flowering on June 1 and Harvesting on August 5, - 10 weeks of flowering. Didn't close up the tent for the last 3 weeks. They have got 4 good flushes and are ready. Thanks for looking in. Chuck.

Day36, 37, 38: Seems to be growing a set of leaves per day now. Super growth! Stretching to the top. Day39: I had a hiccup with the camera. For some reason it stopped responding at 04:30 in the morning. I only realized it much later. I still don't really know why, but reseating the data ribbon fixed the issue. Day40: After fixing the camera, I decided to take this view again. The Lady is starting to show some nice growth and this view will show it best. If you look carefully, you'll see that her branches are not green, but rather reddish. Definitely related to genetics :) Everything else is within limits. Plus, the leaves look super healthy. Day41: Here you can see the stem colour better.

Hi guys, what's up? Welcome back to my diaries. My experience with this pheno has been just amazing and I wish I had a ton of these gems by now!Really very resinous, tight and compact buds .... With spectacular colors and aromas that ... mmmmmm already make you dizzy I'm sure we'll re-propose this delicious plant on a large scale!

Fed nutes at 6.3 pH. Runoff was close to 7 pH. Other than that they look like they're doing well. Very sticky and very fragrant. The leaves of the CBD Blue Shark are a nice dark shiny green. The Wedding Cake is lighter. The profiles of both are starting to come out in the flowers. The CBD Blue Shark has these long, dramatic white pistils. The Wedding Cake is starting to show its creamy colouration with red hairs mixing in with the white and looking very delicious. The smell is incredible in there now. Fruity and creamy and delicious.

Wow wow wow... Apollo what have you guys made at SweetSeeds... My dear this strain is a monster and a keeper. Do you want regular-sized plants and buds in 8 weeks? No problem! Do you want plants that can handle any condition even as a noob? Check! This beast of a strain is out of this world and I'm over the moon with the results. I can't believe it. Normally I've seen auto's do 30 cms and some buds on top... This is simply alien tech... I think I have never seen any plant grow that fast... This is something to try if you haven't already... Completely amazed... And this is while making all sorts of mistakes: too hot, soil also too hot in nutes and temp, hotspots in tent by lacking fans, less PH buffer. Stuff I learned: - In my climate: at least 20 liter grow pots, maybe bigger. - Add hydro corn, I forgot this - Less bloodmeal and bonemeal - More perma tea since mine is now too old to use, it will rot the earth. - More often more water, in smaller pots - Better ventilation and routing of fresh air. - Light a little higher also during flower. - No training is needed, a little defoliation is enough. Thanks again for visiting and don't forget, these results wouldn't have been possible without my trusty SP-3000, consider to try it and see what this light does! Hug bud -

12/24 week 13 Last week for Maggie , no more water to dry her out before harvest likely the 26th Tricones are ready and frankly the plant is on her last legs hardly a green leaf left above about the 50% line. Pics uploaded 12/27 She still drying out, that last was a good soaking. Chomping at the bit here got a Test grow waiting on her.

Quité la malla porque me costaba un mundo poder regar de manera correcta además de que el tallo central que salió doble de una de las nenas estaba comenzando a doblarse por el peso, por ende tuve que entrar a amarrarlo a un tutor para poder tener la precaución de que no se fuera a caer. El color y olor es maravilloso. Seguimos con este crecimiento ...

💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 42 and she's just killing💀it👌 The Gorilla Punch Is Amazing 👏 👉We are in full flowering mode for the stretch 👈 OG 👍 GP 👍 the AF was the hold out but shes finally went into Preflower 👈 So Shit , I gave them just a tad to much nutes at the start feeding 👈 But I have since fixed it So I'm still doing some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Hi everyone, brothers and sisters of Weed! The beautiful glazed wedding cakes are strengthening quite well, their sprouts are beginning to escape from the net and their leaves do not show any kind of growth problem .... we continue like this!

Apr 27: and they’re off. Both seeds germinated very strongly. I’m keeping the soil drier this time. I think maybe I’ve had soil too wet when starting seeds before and that slowed them down a bit. Will focus on keeping the seedlings moist to make up for the low air humidity. Once they get some roots going then I’ll start normal watering. Apr 30: snow day but plants are all still inside under lights. So far so good. May 1: one seedling is a bit bigger than the other at this early stage. I’ll pick one to keep and adopt out the other one. May 3: transplanted to intermediate pot to raise the soil level.

Germinating 3 Purple Kush Feminised seeds. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? Seeds popped today:-)transferred 3 Purple Kush seeds in to small pots 10/09/23 3 Purple Kush seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :-) especially if your seeds were expensive. 11/09/23 no sprouts above the vermiculite yet, i will check it again tomorrow. Today 2 Purple Kush Germinate and rise above the vermiculite 3 days after sowing. Purple Kush is going ok, it could be growing faster, unfortunately i can't upload new photos because there is a problem in the GD system, they are doing there best to fix this problem as soon as possible. GMO Cookies where started 16/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. 3 seeds sprouted, but only 2 survived, it become to hot and one GMO Cookie sprout died. I have now started another strain (Party Monster) 19/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours, 5 seeds of Party Monster have sprouted and are under the same 100W LED grow light. GMO Cookies have all come up above the vermiculite and are now positioned under a 100W LED, there is a small clip on fan blowing and circulating the air. This is my second attempt to grow GMO Cookies from 3 feminised seeds, i messed up on the first 3 seeds, i put them under a 250 Watt LED and it fried them, my folt. Growing from germinating seeds is a very delicate situation, your environment temperature needs good control. 2 Party Monster seedlings are looking good, coming along well under the 100W LED light. 3 GMO Cookies are looking good also under the 100W LED light. Plus i have now started soaking in glass of water 03/10/23, 5 Strawberry Yields fem seeds aka Strawberry Fields. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 5 seeds will germinate by tomorrow? The 3 GMO Cookies fem seedlings are coming along well, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. 5 Strawberry Yields fem seeds have all sprouted and are above vermiculite, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. Also positioned also under the 100W LED light, indoor temp 29 degrees humidity 65%, still to hot for seedlings to be directly under lights due to high temp in the room. 3 Strawberry Yields sprouts are doing well, gave 2 seedlings away, no space for all 5 plants, coming along well under the 100W LED light. 27 degrees humidity 55% good growing conditions Super Lemon Haze I began soaking 13 feminised seeds SLH since 27/10, after 24 hours soaking 11 seeds opened in filtered water in glass, also added 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed! 1 Super Lemon Haze fem seed planted in a 2 ltr pot 28/10, this is the only plant i will keep for flowering. The Pot is Half filled with lite mix compost, and the rest of the pot is half filled to the top with Vermiculite , watered planting medium thoroughly soaking it before sowing seeds 2cm deep in vermiculite. The seed will push through the vermiculite easley with very little effort, in effect encouraging a higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. And i planted the 11 remaining popped SLH seeds in the brown round pot, this is just to see how many will rise above the vermiculite from the 13 SLH fems seeds soaked on 27/10. I will give these away to a friend. Both pots have been placed on a propagating heating mat for consistent and ideal germination temperature until all seeds have risen above the vermiculite. Once my 1 fem seed has germinated! i will cover the pot with a transparen plastic bag and place the pot 20cm below a 100W LED light. Super Lemon Haze feminised seeds Seeds sourced from Satdica Bulk Seeds Soaked seeds 27/10 planted up on 28/10, 12 out of 13 seeds have transformed in to 12 healthy little seedlings. 11 seedlings will be given away to a friend, and i will keep the one seedling you see already planted up in a black 2 ltr size pot. Now positioned under my 100W LED light, distance 15cm above seedlings. Light cycle 24 hours. Keeping them covered with propagating hood for a few days longer to allow seedlings to become better established before removing the hood. The vents on hood are fully open to allow seedling to slowly become accustomed to the outside vege room space. Gelato Cookies 3 Feminised seeds Satdica Bulk Seeds Popped 3 Gelato Cookies Feminised seeds today 06/11 filtered water or bottled water in a glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. After placing on propagating heating mat for 24 hours. This resulted in increased germination speed! and today i can see little white taproot tails protruding out from the seed husk 👌 3 Gelato Cookies seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. Spoon your seeds into it's planting medium, do not touch with fingers, spoon it in with half spoon of water and a seed, place the seed in the center 2cm deep in the planting medium, water it in again very lightly to help the seed settle into a comfortable position before leaving it to rest covered on your heating mat. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Watered and fed them in with Plagron Terra Grow 5ml to a ltr of water, i may have added too much, perhaps 2/3ml to a ltr of water would have been enough? placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :) especially if your seeds were expensive. 3 Gelato Cookies have come through the vermiculite, 09/11 and now they are positioned under my 100W LED grow light. I didn't expect all 3 seeds to pop, because 1 seed looked like perhaps not viable, because i only keep the bad looking seeds for myself and keep the best seeds for customers. I am keeping them covered with transparent plastic bags for a few days to protect them in case it's to hot in the 24/7 grow room which is 24 degrees, this is probably an ok temp for them? but i'd rather not run the risk. Romulan Feminised seeds Germinating 3 Romulan Feminised seeds 26/11 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? 27/11

Started using a Canadian product, Hygrozyme, to ward off Root Rot and help my roots. After 24 hours PH went from 5.7 to 6.7. A bit of slime as well. Did a sterilization with H2O2, rinsed the roots, waited an hour, then re-inoculated with Hygrozyme and my Tarantula Tea. 24 hours later (today). PH is up the same but no sign of rot. RePHed and good to go. Dinamed Plus from Dinafem Seeds (1) and Blueberry Headband (1)from Humboldt Seeds. https://www.dinafem.org/en/dinamed-cbd-plus/ https://www.humboldtseeds.net/en/blueberry-headband/ Lighting https://www.horticulturelightinggroup.ca/products/260w-qb-v2-led-kit DWC Nutients https://generalhydroponics.com/floraseries FloraGro 1 ml/l FloraBloom .5 ml/l FloraMicro 1 ml/l Diamond Nectar: N/A https://generalhydroponics.com/diamond-nectar Cal Mag: 2 ml/l https://generalhydroponics.com/calimagic SuperThrive: .5 ml/l https://superthrive.com/ https://hylineproducts.com/products/hygrozyme/#one Grozyme: 2.5 ml/ltr Tarantula https://www.advancednutrients.com/products/tarantula/ Epsom salts Tarantula Tea 4 liters RO or tap water 5 ml (1 tsp) organic sulphur free molasses 5 ml Alaskan Organic grow fertilizer (or something comparable) 5 ml Alaskan bloom fertilizer (or something comparable) 5 ml Seaweed or kelp fertilizer 2-4 ml Advanced Nutrients Tarantula

Ich habe die Erde austrocknen lassen und sie noch 3 Tage in dunkeln gelassen und Dan abgeschnitten auf gehongen habe mal 2 Knospen Nass getrimmt und Rest mache ich trocken trimmen weil ich im Internet gelesen habe das es die Qualität besser erhalten bleibt deswegen mach ich Bilder wenn sie fertig getrocknet sind. Aber die 2 nass trimmungen sehen echt schön aus😁😁😁😁✌️🏼✌️🏼✌️🏼✌️🏼

The Holidays caused a little headache this past week. Was a few hours late on water schedule due to holiday commitments. Found the middle plant had sucked all the water out and went into underwater stage. A few of the giant fan leaves took a hit, but not too bad. Didn't change anything other than water schedule to every day now and the leaves had no further damage/discoloration. All leaves still praying and doing good. Trichromes starting to pick up on all the plants now. Had a situation in my other tent with a plant that shouldn't have been saved, that i saved, and seems to have slightly hermied and I didn't catch it. Not terrible, as out of a 6 oz plant, I found 42 seeds. Hoping that tent doesn't effect this room, but it's possible it has. Just gonna ride it out now and see how it goes.

These pound cake auto seeds are 100 off rip. I put the seeds in some paper towels on nov29, then put them in the pro-mix potting soil on dec2. Now it's dec4. Only 5 whole days sense. I put the seeds in paper towels, and they have already been born into this world. Thanks, fastbuds, for the seeds. Ever since I saw the seed drop with the pound cake auto, I have had my eye on this strain. I have really wanted to grow a plant with giant giant huge nugs, and I have yet to do so. I have high hope for these guy. I'm only allowed 12 plant and have 10 plants in other other tent. So I will be tossing one of them later 2day. I plan on only bringing one if them to flower. This is my 1st real auto grow so I'm testing the waters in a spare 2x2 tent with my spider farmer 100 board light the newer one with the evo leds. Thanks for reading