Likes
Comments
Share
Likes
9
Share
@Kushizlez
Follow
Day 69 (March 6th) Just gave everyone their last watering. I’m going to harvest and wash everything tomorrow night on day 70. I‘m not going to do that whole 48 hours of darkness thing because I didn’t see a difference last time I did it. In fact, it made my plant under watered before drying which caused it to dry too fast. Slurricane and cheese will be washed with h2o2 and the rest will just be rinsed off in warm RO water and hung up. Before and after washing I’m going to go over each branch with a flashlight and make sure there is no dog hair or debris in or on the buds. I will be drying in my spare bathroom (that no one uses!) from hangers. Aiming to keep it around 60-62F and 50-60 RH. Hoping for that 10-12 day dry. I wanted to do a full plant hang but the tent got pretty dirty and I would feel more comfortable just cutting and rinsing everything off branch by branch. I’m going to try my best to keep the full plant intact. Got my humidifier hooked up and running RO water because with tap water it deposits calcium and lime all over the buds and walls. For air flow I’m just indirectly running a small usb fan. I’m not worried about air flow in the bathroom honestly. It stays nice and breezy down there anyway. Got the food grade peroxide and RO water to wash up the slurricane and cheese. Everything except for the cheese and garlic#1 is looking more than done. Trichomes all look pretty well done. Some of them have even burst open. Smells are all super ripe and mature too. Can’t wait to smell each individually in jars. Next week I will recap what went wrong and what I will do differently next time to keep it from happening again. (Day 70F) Just got everything chopped, washed and hanging. The vast majority of the PM was washed out but I can still see very small amounts. When they dry out I can shake the branches a bit to get the rest off. At very least it’s sterile now. There is no question I lost some potency while washing but the amount is negligible for a much cleaner product. I could see lots of dirt and other debris float to the surface of the water after being washed. And no those are not trichomes, those sink to the bottom. I could put that nasty water through a bubble bag and wouldn’t get all that much. Although it probably does remove a lot of the actual trichomes heads. I’ll have to check with the microscope. Everything is rigged up for a nice slow dry. Temp is sitting at 64 and RH is at a nice 60%.
Likes
114
Share
@Natrona
Follow
RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea
Likes
16
Share
@MUZ_Farms
Follow
Starting to produce THC and the top colas pistils are becoming Amber
Likes
7
Share
@Nikkov
Follow
well, another week and just watering as needed, it should have yielded a lot more this strain is also not known from a local seed bank but no problem. I think the temperature, because I spent most of it being very hot, didn't let them grow, well, but I'm already starting another cycle and soon I'll start posting more here in another grow =D
Likes
24
Share
I started in with the maximum ppm of about 1500 on a fresh reservoir and a ph of 6.1. I also went full strength with beastie blooms 0-50-30 at 1 tablespoon for 6 gallons of water. The white hairs are turning orange now which is the sign of times to BULK UP! My diary seems to be a little off on this 45-55 day flower as today we mark day 37 of 12-12.
Likes
13
Share
@Organic_G
Follow
Hmmm der Bro hat einiges an Trimmen vor sich wenns fertig wird 🤣 alles was denen an Dünger gegeben wurde ist reine Pisse straight aus der Blase haha
Likes
1
Share
Tents are the best in the game and mine ain't for camping folks goodnight......
Likes
10
Share
@710Lino
Follow
Doing great! 1 has a nitrogen deficiency but we fixing it slowly! Way to much coco core fiber cuz I ran outta my usual stuff with that pot
Likes
22
Share
@Fatnastyz
Follow
10/28 This bird is a rockin! Just watching her go! 1-11 Day 41 of flower. Still just water and rotating, to try and even the light.
Likes
10
Share
Likes
148
Share
Hello everyone 😇 😇 😇 Finally, the last week and the harvest time come. On Day 105 and Day 107 I flush her with tap water treated with Ecothrive Neutralise. I was planning a harvest on Friday but accidentally initiated it on Thursday, how ?? I wanted to remove the fan leaves, when I began to pull off the wires supporting the branches, the branches began to break... So I came to an unplanned harvest the day before I planned to do it. 🙌 !! BUT !! 🙌 This one day does not really make a difference, so the fact of the branches start breaking under the weight of the buds made me pretty happy 🙏 🙏 🙏 Thanks to everyone for the comments, likes and interest. Soon another stage of my adventures, this time starring: Think Fast and most likely Auto Banana Blaze of course from Dutch Passion. Have a nice and quiet Sunday, You Lovely Girls Growers 💪 💪 💪
Likes
28
Share
@Uwish
Follow
Day 49 to 56. I'm not going to hide that I'm in a hurry to finish the run. The mold arrived at the end of bloom because of me, it's depressing... Thanks for your comments these last weeks. :) This 8th and last week of bloom for the Kum Zuat 1. I continued to rinse the plant all week with power clean at 5ml/l. The Kum Zuat was harvested at 56 days of bloom with 1 week of rinsing. I still found some mold on some buds of several plants that I immediately removed. My yield will be affected, I still have this pretty Kum to cheer me up! All the photos and videos on this update are about Kum Zuat 1. The other plants have been fertilized normally for this 8th week, you will find them in pictures next week. I enter the 9 th week of bloom and I have 4 plants left which will be all cut on day 63 of bloom also with 1 week of rinsing. 1 kum zuat 1 kosher cookies 2 gmo x animal cookies Can't wait to start this new run.... I'll tease you a bit: Sanlight of course <3 Ebb & Flow Botafarm / Blueberry muffin Advanced Nutrients Are you interested in following this?
Processing
Likes
14
Share
Royal haze auto is in its 9th week from seeds 3 weeks into flower it really likes last and to be honest I would recommend it definitely it hasn't had one issue at all so far I'm giving it 3.5ml of coco ab per litre
Processing
Likes
13
Share
@GrowGuy97
Follow
Flower day 31 - Having a little trouble with the temperature getting higher than I would like because my dehumidifier puts off some heat while it’s running so it’s been a constant struggle to keep the environment in this tent stable! Definitely will not have so many plants next run lol, but all in all the ladies are growing great & I can’t wait to see how they turn out! Thanks for following friends & happy growing!✌️🏼🌱 Flower day 33 - Fed half the plants today with PH at 6.4 to try and keep the humidity down some I’ll water the other half tomorrow!
Likes
16
Share
@Texcola
Follow
Cause Its the first time so many things fail . But I will do better ;) Thank you so much Smoke good. Love this smell and lust in the taste! The seed any grower must try once
Likes
7
Share
Всем привет! Моему малашу сегодня 11 дней. Выглядит здоровым и счасиливым. Поливаю водой, ни чем не кормлю Признаков болезни и нехватки элементов не замечено! Всем и мира и добра!
Likes
10
Share