9/17 Didn't know this was a new week or I would've taken more pictures. I'm glad I took those two plants. As it dries and I start to trim I could see where it could've turned to rot real easy. It rained enough last night to soak all the girls. The two bottoms I harvest look like the have pm on them. If so I'll wash it or through it in the concentrate bag. Found a few colas a dropped which will go in the concentrate bag. Scoping the toasted toffy and the event horizon and the both look AMAZING! I've scoped the others and I'm extremely impressed. They may be difficult to grow strains but they have high cannabinoid content. The sherb cream pie has really come to life and turned totally purple with beautiful flowers. The girl in the 50 has several soda can sized buds. I hope this weather holds up. I don't like flowers this size getting wet. The sativa leaning hydrid us the only one I may have trouble with. It's only in a 10 gal but it's enormous! If needed I coyld bring it inside at night. The buds look like cat tails. I'm used to growing indica dominant strains. Plant us super healthy though. I'll be intrigued jail for a while and I've gotta make contact with whoever is going to do my extracts. I'll keep this updated. It's a lot of work bur it's worth it. 9/18 WATERED EVERYTHING I GALLON BUT THE BOTTOMS OF THE 2ND EV AND THE TT WHICH EACH GOT A HALF. Since harvest I've noticed some pm spring up on the toasted toffy. Looking at the other event horizon through a scope the trichs are all milky with some amber. I'm just waiting for A LITTLE more amber. And for me to have time and or room. I decided to harvest the tops and majority of one of my event horizon and toasted toffy. Today during an inspection I found a couple grey mold branches and some botrytis on my big GMO on the back. This plant is done. It's by far the furyhest ahead. Septoria effected the yield a little but pistols were retracted and amber was at like 10%. I thought about it and I watched the plant next to it with the pm have a branch I supported just "slough off". Right in my face. I figured if there was a sign tjis was it. I cut that rot off and put the buds from the branch in a bag and froze them then I went around and harvested the limbs on the other plant that were furyhest along. I took about half of it. I could've taken more and maybe I should've but I'm tired. I also noticed a couple spots of grey mold on the plant in the 50. All the leaves were falling off. I finally scoped it and it was right whetr I wanted it to be. Looking at the colors I'm glad I spent so much time the past few days. That one I hung whole. The sherb cream pie has something eating the fresy shoots (probably ear wigs. But the buds are fattening and the trichs aren't quite there. I'm going to let the rest of this stuff go ad long as possible. With the exception of the other event horizon. I finally tried it. It's fucking killer. I could take that plant now. The only reason I'm not is because I have to much work on my husband's as is. I'll do some videos amd pictures but I'm tired as fuck. Got to try event horizon. Very fucking impressed! 9/19 The past 3 days I've been working 5 a.m. to dark. I went back and harvested the bottoms of the toasted toffy and event horizon 1. After injury from harvest they contracted wpm. I used this as a learning experience and put some away in the freezer for concentrates and used a peroxide and water bucket. That's what kills the p.m. anyway. I hung them and they spun in the wind. I blew them lightly with a leaf blower before putting them ok strings I had previously setup with a fan in front of it. I kicked ass today. Toasted toffy got sampled and did NOT disappoint. I had it in a jar though and it was green so I'm not counting this. I do have some dry. I have indoor left too. Like in the video that one GMO looks like it's fucking dying or something. I'd rather cut it and use it for concentrates if it effects my healthy plants. I just checked on that plant in the 50 I hung. It looks amazing under the scope and smells better. Decisions, decisions. I do have a few calls I should make sooner rather than later. We are supposed to be getting rain. 9/20 The past 3 days have been hard. The wife's medical stuff is acting up and I had to tend to harvesting a few. My whole body hurts. I even did my first bud wash yesterday! The ev and tt I took and left some buds on ended up covered in pm. So I decided fuck it and tried bud washing. I also froze some for extracts. Speaking of which I need to male contact with whoever I'm going with this year because I think I've reached the point of diminishing returns on that dieing GMO. When it comes to grey mold and botrytis I don't fuck around. Winds are really high today. Putting the scope to the sherb pie is making me second guess myself too. Oh well. It's not going to rain today. And if needed I can move them in the barn. If I get ahold of Mt processor I'll chop that GMO and bring it right there. The other thing is that I've got tons of weed and a lot of its hanging so I've gotta find someone that will do a batch of live rosin then like a elbow of dry. This is the best part of the year. We'll It's supposed to be. Cutting down good plants us bittersweet. I don't mind chopping that one gmo a little early though because it's close to hitting the point of no return. That little sativa dominant hybrid in the ten is HUGE! The buds are swelling like crazy too. It's got a COUPLE septoria spots but this thing is resilient and easy to move around. This will finish perfectly. So far I'm happy with what I have. I'm GRATEFUL. The two September plants I tried were GREAT. A 90/10 and an 80/20 and they both suprised me and got me exactly whete I wanted to be. I'll keep things updated. I did a video I'll upload. 9/21 Weather is still great and the buds don't even seem wet in the morning. The thing is is that something (rot or ear wigs probably both) have stripped lower interior branches. In some cases stripping them ENTIRELY or chewing the stem right off. It wasnt happening to my favorite GMO or the one in the 30 and the like on in the ten. The Sherb pie I noticed grey mold on 3 different branches. Last time I checked trichs it wasn't ready but I've got to get a handle on this mold/pests or it's going to he taken a little early. We have incliment weather coming Wednesday I think. I'll bring the 10 inside and if I have to I'll bring that perfect GMO in as well. I'm going to scope everything again today. I called a bunch of extractors for prices. I was going to do fresh rosin and just yank and drive but that is looking to be harder. I can get badder made CHEAP from a reputable lab. I think I'll do that. They prefer dry and that way I could through what's left from last year in there. I have this other one GMO that I've had the same issues with. I'm sick of removing bud rot or having to cut interior branches off due to pm. Tried toasted toffy and it was fucking amazing. I'm planning on trimmingvthe ev and if I finish I can bring the other one in. It's done. It's not getting any bigger. Trichs aren't changing. That GMO I am going to scope when I get home and it will be coming down in the next couple days. Otherwise I'll end up with half of what's there. The GMO I took the tops from is finishing up too. If I scope that and it looks decent and I have the time I'll take the remainder. I'm leaning towards doing at least a lb dry for extracts. I've got some frozen. I've got some hanging and most is still in the ground. I sleep on all major decisions. However, I know getting my nice buds soaked when I'm already losing shit to budrot and grey mold isn't the smartest thing. I'll probably take what I can and bring the others inside to keep them safe. I didn't think I'd have this much quantity. I knew quality would be good but this isn't a bad year quantity wise either. I'll keep this updated. 9/22 Busy as hell! Rain coming Tuesday. After a final check of the scope and the flowers and I took the GMO that all the leaves had fallen off of. That plant is going straight to extracts with the one in the thirty. I also "finished" harvesting that GMO that was furthest along. Trichs were getting amber. Been in trim jail. Was going to take the Sherb Pie but I'm not seeing amber yet. I did have to cut off some branches that had rotted. I'll keep an eye on it. It will come down when it's ready. It just sucks losing little bits of it. My favorite GMO is sooooo close to perfect. I should just take it but I'll wait. If we get rain I'll bring that and the sativa looking one in the ten is the barn. Back to work now. Before I forget what strain is what lol. 9/23 Still busy as fuck. I chopped the other event horizon amd hung it whole. It's DONE and it doesn't need to go through the rain storm. I also took the majority of the GMO early pheno. What's left will get plucked off and used for extracts. The big one in the 50 is getting dry. I have finished the event horizon and I'm not "finished" with the toasted toffy but I have it in 5 gal buckets with a food grade lid so u can at least cure correctly. The gmo is still hanging. I'm wondering whether I should wait it out or chop. I'm gonna take care of what I have inside first and hope that shit doesn't eat my plants or that it doesn't rot off. That perfect GMO has one branch with some grey mold. I might cut it off. I'll keep this

Растения набирают массу, жду более сильного увеличения в объемах.

Hello 🍀 10 weeks and waiting for the blooming phase. The plants are stretching and looks healthy!! 💥 Today (6/9/25) was the day I moved the girls in a new home 🏡 ⬆️ Was to tall for the balcony 💚 A friend gave me this tent 1.2x1.2x2.2 I hade a Lumatek 200w and the new set up is ready ✨️ 🌙 Tonight the first 12/12 💤 Cheers 🍀❤️

Let’s Go Day 52 of 🌺!! At 101 days old , these girls are looking an smelling oh so amazing! 2 of the Pre 98 Bubbas and both Dirtyblondes started getting flush on Saturday, so they will continue flush the rest of the time for 12 days an they will be ready for 48 hrs of darkness. While the 2 other Pr 98 Bubbas will remain on same feeding through rest of this week a most likely start getting flush by next week!! Hope you all enjoy an have an amazing productive day as well as great holiday weekend, happy holidays keep them eyes peeled for next weeks updates , Cheers y’all 😶‍🌫️💨💨💨💨💨🤙🏻

They're coming along nicely. 😁 Managed to get a 3rd bean to pop and I'm gonna get it rooted in soilless mix before giving her her own bucket but I'll flower them all at the same time so I'll probably just have a runt on my hands. 🤷‍♂️🏽

End of the grow cycle finally! This one was a test run, I wanted to see the possibilities using liquid nutrients in an Autopot-like system. Firstly, because I got plenty of the nutrients left from the previous grow. Although it is possible to use this method, it’s way too much work. I had to change the water/feed in the tray all the time while I was facing with ph stability issues. The harvest is now in the drying chamber. I will keep you updated with the end results.

Been slack with the updates as we are busy buidling a new greenhouse. will make sure I take nice individual photos for harvest though.

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D63/B01 - 17/01/24 ⚗️ EC: 0.1 pH: 7.4 🌡️ T: 23 °C H: 58% 🌊 Flushing 🍗 💧 💼 Added CO2 dispenser system 🧠 🚀 🎬 Added 1 pic ________________________________ 📅 D64/B02 - 18/01/24 ⚗️ EC: 0.9 pH: 7.2 🌡️ T: 21 °C H: 53% 🌊 Res changed 🍗 Added CalMag - Bloom A-B - B-52 - Bud Candy - Rhino Skin - Voodo Juice 💧 🧠 pH is still too high, I'm evaluating to use pH- 🚀 🎬 Added Timelapse video ________________________________ 📅 D65/B03 - 19/01/24 ⚗️ EC: 0.8 pH: 7.4 🌡️ T: 20 °C H: 45% 🌊 Added a little bit of pH- 🍗 💧 💼 LST 🧠 🚀 🎬 Added Timelapse video and 1 pic ______________________ 📅 D66/B04 - 20/01/24 ⚗️ EC: 0.8 pH: 7.4 🌡️ T: 21 °C H: 51% 🌊 🍗 💼 LST 🧠 🚀 🎬 Added Timelapse video ________________________________ 📅 D67/B05 - 21/01/24 ⚗️ EC: 1.2 pH: 7.4 🌡️ T: 21 °C H: 50% 🌊 Added 6L 🍗 Added Calmag - Bloom A-B - B52 - Bud Candy 💧 💼 🧠 🚀 🎬 Added Timelapse video and 2 pics ________________________________ 📅 D68/B06 - 22/01/24 ⚗️ EC: 1.2 pH: 5.9 🌡️ T: 21 °C H: 51% 🌊 🍗 💧 Added pH- 💼 🧠 🚀 As I would join this contest : https://growdiaries.woodroom.tel/giveaways/TrolMaster-Tent-X-Ultimate-Grow-Challenge I asked for a Tent-X device and they accepted to borrow it to me until the contest ends. 🎬 Added 1 pic ________________________________ 📅 D69/B07 - 23/01/24 ⚗️ EC: 1.2 pH: 5.2 🌡️ T: 22 °C H: 51% 🌊 Added 4L of water 🍗 Added Calmag - Big Bud - B52 - Bud Candy 💧 💼 🧠 pH is finally stable on the lower side (hopefully) 🚀 🎬 Added 4 pics

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

Ok so this week I did a defoliation and a tigh down too the netting , I really was not planning on doing such a big defoliation but the leafs became thick and dense and there was almost no light penitration down too the lower branches of the plant , so she is opened right up now and the humidity and temperature has dropped loads and the air is moving alot better around the leaves and branches , I will not take anything more off her now , I have also added Cal mag too the nutrients for this week only , I am very happy with them so far and being new too all this it's all very exciting , Thanks for looking :)

So far so good, this girl is developing really well. She's heading really well into the final weeks ✌️💪🌿

well, another week and just watering as needed, it should have yielded a lot more this strain is also not known from a local seed bank but no problem. I think the temperature, because I spent most of it being very hot, didn't let them grow, well, but I'm already starting another cycle and soon I'll start posting more here in another grow =D

Day 57: Watered each plant with 1L with nuts 1588 ppm, 3380 us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1690 ppm, 3595 us/cm, 3.5 EC (gorilla cookies) 2 different feedings for the 10 plants Day 60: Watered each plant with 1L with nuts 1563 ppm, 3325 us/cm, 3.3 EC Day 62: Watered each plant with 1L with nuts 1726 ppm, 3712 us/cm, 3.7 EC (purple punch, strawberry banana, wedding Cheesecake)(I gave them more than usual, by mistake) 1528 ppm, 3525 us/cm, 3.5 EC (gorilla cookies) 2 different feedings for the 10 plants Day 63: Watered each plant with 1L with nuts 1563 ppm, 3325us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1523 ppm, 3301 us/cm, 3.3 EC (gorilla cookies) 2 different feedings for the 10 plants Day 65: Watered each plant with 1L with nuts 1518 ppm, 3210 us/cm, 3.2 EC (purple punch, strawberry banana, wedding Cheesecake) 1359 ppm, 2891 us/cm, 2.9 EC (gorilla cookies) 2 different feedings for the 10 plants Next feeding I will start to flush some plants, 1st week with flawless finish, 2nd week clean water, 10x the pot, 150L each Day 67: Watered each plant with 1L with nuts 1379 ppm, 2908 us/cm, 2.9 EC (1 purple punch, wedding Cheesecake) 1250 ppm, 2687 us/cm, 2.7 EC (gorilla cookies) 285 ppm, 606 us/cm 0.6 EC (3 strawberry banana and 2 purple punch) (2L each) 3 different feedings for the 10 plants Started to flush all the strawberry banana and 2 purple punch with flawless finisher. (1st week flawless finisher, 2L each, 2nd week clear water, 150L)

It too longer than usual. Maybe one extra week. The smell after trimming was amazing. Like pine and cotton candy. I think it was the Canna Boost. Amazing smell. This was my first DWC grow and plan to continue using this method.

Chugging along. Have had some moisture issues in the tent- pooling water on the floor. Added another fan to keep things moving plus reduced the temp at which the exhaust fan blows one degree. That seemed to help. I’m a little worried that the buds seem so small this late in the game. I’ll officially ask a question about this later, but I have been having a lot of condensation inside my tent. That’s because it is in a cold part of my house. And though I do have two fans running and the temp is set low, the condensation is running down my walls and under my floor tray. Not a huge issue except I tried wiping down the walls today and bent a pretty good bud stalk. Not sure if it will keep growing or if it will be an early sacrifice. But, bummer all the same. Also, I figured out that I was a week off. So, just starting week 8.

Sugarlato really starting to come on well now.. small compact plant only around 50cm in height so far in 15 litre pot. Looking like its flowers will be nice. All round the best out of the 3 strains in the tent. Smell is moderate right now but filter is on inside the grow tent. Updates will be coming again in a few days DRSHOTZUK

7/12 - dumped ice on the soil and turned the lights off. She will get the chop late tomorrow night. 7/13 - chopped and hung whole with humidifier set at 60% and trying to keep temp in low 70s. Not sure if she will get a full 10 days before getting kicked out by Super Silver Haze from below but I hope so!! 7/25 - into the jar she goes. My hands are so damn sticky!

More, more, more...