Hi, Today was the day 😍, the harvest day. I will return after 15 day +/- with more photos when trimmed and dry.

08/10/22 watered with Recharge. Welcome to motel 6 More ladybug porno. Now have yellow ladybugs 8/14/22 this plant is a magnet for ladybugs 🐞

This week it is official, I have used both organic and synthetic inputs. I did notice she was starting to become a little defcient right around the time to top dress(Week 3). I think her issue was potassium. I have also been overwatering a bit, trying to get a handle on keeping the media moist, I think the wetting agent in the Pro-Mix is working as well as the worm castings. Other than that, I am really impressed with her speed of growth. To give you growmies an idea of my thought pattern on this grow, the first 3 weeks were just organic amendments. Top dressed with 1 cup of worm castings, with 5 tbsp of Home Grown and 5 tbsp of Flower girl and watered in with a light nutrient(syn) solution. Next I will water only roughly until my next top dress in 3 weeks in which time I will feed a compost tea. Thanks for those that stop by, like and comment. See ya next week growmies!

Same old same ol

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

23/5* Water day 275ML with Biobizz Grow and Fish-Mix -Temps 24-25 Day / 21-23 Night -Humidity 70-75% RH Correction to LST / Letting the bigger restraints go 24/5 Freed them of LST as i want to let them grow higher -Temps 24-25 Day / 21-23 Night -Humidity 70-75%RH 25/5 Showing good growth -Temps 25-27 / night 22-24 -Humidity 70-75%RH 26/5* Water day 275ML with Biobizz Grow and Fish-Mix as usual -Temps 23-25 / night 22-24 -Humidity 70-75&RH 27/5 - Got my humidity controller -Temps 23-25 / night 22-24 -Humidity 72% (+-5) 28/5 - Did some super super cropping and a bit of light "Chiropractic" (Kyle Kushman method) and a bit of lst on the branches i wanted to get more light -Temps 24-26day /22-24 night -Humidity 72% (+-5) 29/5 Water day* As a first time, i watered them before they went to bed, as i wanted to give some nutrients to get over the supercropping stress 275ML (+ 2ml/L Fish mix + 2 ml/L grow) -Temps 24-26day/22-24night -Humidity 72% (+-5) ***********I will put them into flowering in about a week*************** Light to plant distance: d.28/4 53 CM to light (kept the same distance rest of the week 1) d.2/5 50 CM to light d.3/5 42 CM to light d.7/5 40 CM to light d.19/5 38 CM to light d.22// 34 CM to light __________ My lights distance and PAR value: 24" / 60 CM = 237 PAR (umol m2s1) 18" / 45.72 CM 412 PAR 12" / 30 cm 811 PAR 6" / 15.24 CM 1816 PAR

UPDATE GUYS!!!!! So the girls are doing great I got some new genetics also I'll be doing for my next grows and so forth, but yea just watering as necessary, I really really feel that this process is a learning curve for me lol, mainly because I've learned from the past that everything comes with progress trial and error, so I'm learning which I accept so its okay its okay haha but things are progressing and ill stay up to date with this for you guys thanks!!!!

05/10/2018 New Tent setup. 4 plants - Veg room. 06/10/2018 Re-arranged the room to make it more practical. 07/10/2018 2x Seeds Pineapple Haze dropped into Root Riot. 08/10/2019 Propagation kit added 11/10/2018 Day 5 Sprouted 12/10/2018 Day 6 - Stretching 13/10/2018 Day 7 - Added to the tent setup.

Harvest time, the flowers seem ready. The seeds were given as gifts and this was my first scrog. Given the high summer temperatures I thought I wouldn't even finish, I'm satisfied in the end. a couple of weeks to dry everything and then the fun begins.

Flowering nicely now. Not drinking a ton of water but I attribute that to lower temps lately.

Let’s Go day 29!! This week went real nice ! Girls are staying very healthy and building up nicely and even started showing signs of female sex which is super great ! We started doing a little bit of leaf tuck training method on em , nothing to big as like I said I want these girls just to do there thang an grow more on naturally side! My Air temp and Humidity have been on point all week, staying from 70-75 degrees throughout the day and humidity staying around 58-61% humidity , my girls are loving that summer an 75 feeling !! Can’t wait to see what we do this week ! Hopefully you all enjoy, and are ready for another great productive week ! Peace love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨🤙🏻Happy Grows✌️🏻Week 4 let’s get it !

Did my first res change, it went smoothly.my ppm is at 840 now EC 1.3 . I was going to lower it, but she seems to be liking it, we’ll see tomorrow morning .Brought the EC back down to 1.1

Also a fastbuds purple lemonade in a 11 litre pot (30grams)a a original cheese in a 2 litre pot(experimenting)which is not ready yet. Strawberry pie.....wow so impressed with the yield but also the looks are amazing and smells like strawberries... who’d of thought it lol. Recommend to everybody will defo grow again. Fastbuds are killing the auto game!👊🏻

Alle drei Future #1 wurden gestern getoppt und mit Bud Candy von Advanced Nutrients und Bio Bloom von Bio Bizz auf die Blüte vorbereitet. All three Future #1 were topped yesterday and prepared for flowering with Bud Candy from Advanced Nutrients and Bio Bloom from Bio Bizz.

Last week plants were looking super healthy and responded very well to the second topping so I decided to flip the light schedule few days later. They already started stretching and the smell is noticeably enhanced.

3x3 AC Infinity under FC-E3000 LED - applied scrOG netting and began horizontal training. Continued IPM and SP treatments. Reduced SP treatment to weekly from every other day. Spider mite infestation completely gone after using Organishield IPM program. Transferred Black Cherry Gas clone to the 3x3 tent. All four clones top dressed with BuildAFlower by BuildASoil in preparation of 12/12 switch to flower. 2x4 AC Infinity under SF-2000 LED - applied grandmaster topping to Black Cherry Gas in order to slow down vertical growth. Continued IPM and Soil Program (SP) watering treatments. Transplanted Blueberry Cupcake and French Macaron from 1 gallon to 3 gallon pots (final transplant). Later in week, I topped both BBCC and FM. I also topped the Black Cherry Gas and moved her to the 3x3 tent joining other three clones. Set SF-2000 lighting to 18". Plants in AC tents are doing extremely well during vegetative period. PPFDs consistently between 400-600.

Week 7 january - 13 January 10/1 - feeding day

One more week up we go, they responded very well to topping and are growing fast and strong 💪, i will star training this ladies some point this week, i will as always keep you guys posted as things move along 💚💚💚 Notecing some different greens from the ones i like popping up , so just in case and since I’m not feeding on my watering npk , I decided to apply nutrispray using 1ml of it for each Liter of water, and spray out them with a good bath. I brought my VIPARSPECTRA P- 2000 ( with is performing amazing in this 3x3 grow space ) to minimum power to avoid burning my girls leafs, and now lets see how they react. I believe that pretty soon i will introduce them to a 12/12 schedule , but for now lets see how they react and evolve for the next couple of days 💚💚💚 You can check out last week timelapse https://growdiaries.woodroom.tel/diaries/126067-grow-journal-by-dogdoctor and if you in to timelapse stuff i have just recently uploaded the Magnum auto Timelapse just for fun here https://growdiaries.woodroom.tel/diaries/105893-grow-journal-by-dogdoctor , hope you guys enjoy it 💚💚💚 growers love and one more week up we go 🙏🌱💚 And with enormous honor and pleasure that i start collaborating with Zamnezia and Viparspectra For this run i will have the pleasure of growing some Runtz genetics from Zamnezia seeds that they wore kind enough to send me for test and review 🙏🙏🙏💚💚💚🙏🙏🙏 and for the testing and reviewing i was blessed with the VIPARSPECTRA model P2000💚💚💚🙏🙏🙏 they wore amazing and send me this LED light for me to do some testing and some reviews. Special thanks to Zamnezia and to Viparspectra for this opportunity, lets make magic together 💚💚💚🙏🙏🙏 All i grow is medicine for myself, for me and for my best friend with is me 😆 nothing to sell, so don’t even ask 😅💚💚💚 All info and full product details can be find in can find @ https://viparspectra.eu/collections/grow-lights DISCOUNT CODE 5% - DOGDOCTOR ( all store ) https://www.zamnesia.com DISCOUNT CODE 10% - GROWITGD ( just for seeds ) https://aptus-holland.com/ More info and updates @ https://growdiaries.woodroom.tel/grower/dogdoctor https://instagram.com/dogdoctorofficial https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg 💚💚💚Growers love to you all 💚💚💚

Bonjour à tous les padawans et les maîtres jedis Cette plante est vraiment exceptionnelle! Elle représente la force et j'en suis fier 😍 La semaine 4 est déjà la ! Ma plante est saine le LST ce passe relativement bien je l'ajuste tout les jour je le combine avec la technique du pincage d'Apex cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Le pinçage est une pratique courante en horticulture. Beaucoup de cultivateurs l'utilisent pour améliorer le rendement de leurs plantations cannabiques ou autres. Il est souvent question de 'taille' des bourgeons apicaux. Cette taille se pratique également mais il n'est plus alors, à proprement parler, question de pinçage. A l'instar d'une taille, le pinçage va permettre de stimuler le développement des ramifications tout en préservant les sommités en vue de la floraison. Il est très utile pour uniformiser une canopée. Pour réaliser le pinçage, il vous suffit de presser 'fermement' la tige [entre le pouce et l'index] aux environs de l'apex jusqu'à sentir un léger 'crAck'. Cela aura pour résultat d'endommager les vaisseaux impliqués dans la circulation de la sève [situés dans le pourtour de la tige], la tige conserve toutefois une certaine rigidité. Pour obtenir le même résultat, il est également possible de vriller légèrement la tige sur elle-même. L'interruption du circuit d'alimentation entre le ou les apex et le reste du plant va provoquer un déséquilibre hormonal qui aura pour conséquence le développement des ramifications antérieures au point de pinçage. Jour 25 j'arrose mon pot normalement avec un quart de son volume en eau toujours avec un PH de 6.3 à cette eau j'ajoute 0.7 gramme de greenhouse feeding enhancer pour favoriser son développement racinaire. Par la suite je n'aurai plus qu'à ajuster mon LST jusqu'au stretch et surveiller mon arrosage, Je pincerai mes apex suivant la pousse de la plante pour uniformiser la canopé. Petit rappel de ce que est le LST et comment le pratiquer le plus efficacement possible: Quand commencer à appliquer la technique LST De nombreux cultivateurs commencent la manipulation dés que les plantes possèdent entre 3 et 6 nœuds ou une paire de feuilles. Durant cette première étape de la croissance, le tronc encore flexible est pliable sans risque qu’il ne se casse, même si au fur et à mesure du développement de la plante il sera de plus en plus difficile de le plier. Nous pouvons continuer à guider la croissance des branches durant toute la culture, même durant la floraison, ce qui pour cette étape représente un grand avantage face à la taille, qui n’est pas du tout recommandé une fois que la formation des têtes commence, cela stressera en effet la plante, ce qui aura pour effet de retarder la récolte. Comment appliquer la technique de guidage LST Si nous sommes prudents, la flexibilité naturelle des fibres du cannabis permet de plier leur tronc et branches avec une relative facilitée, même durant la floraison des plantes. En utilisant une corde fine, nous pouvons accrocher la pointe de la plante à la base du pot par exemple ou à un tuteur que nous aurons planté dans le substrat. Nous plierons le tronc avec précaution et nous le fixerons avec la corde, à partir de là, nous pouvons augmenter progressivement la tension de la corde, chaque jour un peu plus, jusqu’à obtenir la position souhaitée. Soyez attentif à la réaction de la plante, essayez de ne pas appliquer trop de pression sur la corde et rappelez-vous que la flexibilité des branches peut varier d’une plante à l’autre. Pour obtenir de meilleurs résultats, il suffit de suivre quelques règles simples. Pour commencer, nous devons choisir une corde fine mais pas trop pour ne pas blesser les troncs au fur et à mesure qu’ils grandissent et qu’ils deviennent plus gros. Nous pouvons utiliser des crochets en plastique souple ou de n’importe quelle autre matière flexible pour éviter d’endommager les plantes. Spécialement en intérieur, utiliser des cordons en plastique de couleur (voir les diaries de @Silky) est très pratique pour voir facilement les accroches et faciliter le travail au milieu du réseau formés par les cordes, les tuteurs, les mailles ou les supports que nous aurons dans la culture. Bien entendu, en culture extérieure et surtout en guerilla nous ferons juste le contraire et nous utiliserons des matériaux de couleur qui n’attirent pas l’attention pour que notre jardin reste discret. Pour stresser les plantes au minimum, la mieux est de réaliser ces manipulations le soir ou juste après que les lampes en intérieur s’éteignent, ce qui leur permettra de se remettre durant la nuit. Normalement, le jour suivant nous pourrons observer comme les pointes des branches que nous avons pliées se dressent de nouveau vers le haut à la recherche d’une source de lumière. Je combine un pincage d'Apex (explications plus haut) au LST cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Que la force soit avec vous 💪

The grow started off pretty slow due to user error, but in the end through trials and trepidations we overcame and ended up with a pretty decent harvest. I personally can only get better and will continue to use what iv learned and documented in my upcoming grows. Dried in about 9 days at 47-55% RH and 63-67° F. Edit. Didnt weigh it wet so after getting a little over five ounces dry I'm just using a 3:1 ratio to figure in the wet weight. Granted that doesn't account for all the popcorn buds, fan leaves, and stems. All the left over unmatured buds and larf will be turned into edibles and salves. Happy growing!!!