14.1.25: I've been readjusting the LST. I just took all the pegs out and reshaped her. I got some new LST equipment in the mail today, have been glad to have more pegs. I got some clips too, but they don't seem to stay on 😕 I'm currently only using the pegs, I have some thicker soft wire, but I forgot I don't have pliers to cut it! Also I'm running very low on Biobizz nutrients, so that could be bad 🤞 18.1.25: I have done another large defoliation on PPP1 and PPP2. Also, moderate defoliation on all other plants today. All LST ties and pegs are readjusted. I have turned up the light to 90%. Same distance of between 24-28 inches, depending on height of specific plant. I have increased the dosage of Biobizz Bio-Grow and Fish Mix to give an extra boost of Nitrogen as several plants were showing yellowing. They have responded very well to this. Unfortunately I ran out of my Biobizz nutrients and PH UP. I'm currently using Bicarbonate of Soda to increase the PH after the nutes PH comes out to about 4.1. Obviously, that uses a lot and I only had a 250ml bottle, which I used last run too. This run I have 9 plants. The only thing I'm worried about is the salt build up. Have you used it before? Or any other natural way to increase PH? Please let me know! I've also added Biobizz Fish Mix to help with the extra Nitrogen needed. Watering with 1ltr of dechlorinated water PH'd to 6.3 with the following nutrients;- ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish. I water with this every 3 days. I did order some more Biobizz Bio-Grow and Bio Bloom. I found some at a reasonable price on Amazon. I still have about 800 ml of Biobizz Fish Mix left, too. It is fairly expensive this time as the plants are hungrier this run. I also got a new bag of Canna coco, which I may use to add a top dress with some dry amendments. Which hopefully will save some cash on the bottled nutrients and stretch out until the end of this run without having to buy anymore. I have purchased a funnel to pour the water. It is difficult, due to the shape of my LST, to water precisely. I have spilt it all over the tent several times 🙄 I've also ordered a 2 litre jug. Currently, I'm mixing water for 9 plants individually in a 1 litre jug. It's tideous. Hopefully, this will solve the issues. Cleaning the tent after watering every time isn't my idea of efficiency 😅 Thanks for checking out my diary 🍃 ✌️

4x4 #1 | Plants are starting to stack bud formations, in week 5 flower 4x4 #2 | Plants are starting to show pistils this week & a active stretch, in week 2 flower Gyat is very easily managed and both phenotypes are looking great, even the 'finicky' plant Scat Queen is a herm and both phenos, I'm still going to run them.. they look good other than. The pheno in week 5 flower smells really good and overall structure is nice but seeded and I'm seeing the 2nd pheno starting to show the same traits.. this experiment shows it's not a stable cross from Elev8 just by the fact every other plant isn't giving this problem and its a 100% rate in 2 different tents. Did some shuffling & added a smaller plant, Sherbie Truffle by Detroit Seed Co in the front right next to Gyat to the left -it is a week behind the others but will fill the space nice. ( Scat Queen back left, Gyat back right and front left, Sherbie Truffle front right ) Keeping the flow smooth growmies 😎

Day 64: Worried about those yellow marks, can't be overfert, it's prolly stress from LST...

-04.07.2024 The second week of the vegetative phase begins today. the plants look really good so far. from this week on they will get some fertilizer 1ml of BioBizz Bio Grow to 1 liter of water. Each plant was then watered with 500ml. The lamp continues to hang 75-80 cm above the plants. measured values with the Photone App: Ppfd = 425-430 DLi = 30-31 -05.07.2024 Just a visual check Soil still felt moist. -06.07.2024 Just a visual check Soil still felt moist. -07.07.24 The soil was dry and each plant was watered with 500 ml of water. They look really good, maybe they will get some LST during the week. -08.07.2024 Visual inspection. Soil feels moist. the light intensity has been slightly adjusted, measured values with the Photone app: ppfd = 500-515 DLi = 34-35. The light intensity is increased slightly over the course of the week, so that the third week of vegetation begins with a DLi value of 40 and a Ppfd of 600. -09.07.2024 Visual check The soil felt a little dry, the plants were watered with 250 ml of water per plant. Light LST was also applied. The light intensity was increased slightly, measured with the Photone app: Ppfd = 540-550 DLi = 37.5-38.5. -10.07.2024 Today is the last day of the second vegetation week. The plants look really good, the soil still felt slightly moist The light LST has been slightly readjusted.

Day 44, 2nd of November 2021: Hi there. So the plants had 2 days of darkness before the lamp was on again and from today it is 12/12. Big change also is the power: It is now on full power which is 240W so 100% capacity. Ventilation is different as well under the 12 hours period when the lamp is on it switches 1 hours on and after one hour off mostly to keep the temperature and of course because of fresh air flow. When the lamp is off it switches on in every 2 hours for 15 min at the same time with the extraction fan. The extraction fan is on 12 hours when the lamp is, and then it switches on in every 2 hours for 30 min. That's all a bit more water for them from today also. Humidity quite the same, temperature as well. Fertilization changed, the BioBizz family raised up to be 2ml/L each so it is like 2ml/L of BioGrow, 2ml/L of BioBloom, 2ml/L of TopMax... see the ratio above. Previously it was just 1ml per liter each. The schedule of the fertilization has not changed happnes 2x a week except epsom salt just 1x a week. Not much to mention as it just started.

i started feeding them more water now, i feed them 4L water but i measured runoff at 2000+ ec i dont know if thats important the strawberry lemonade really outgrows all high levels. 2 look very healthy, the one looks like ph lockout i dont know how to fix that, i ll just look further if nothing more happens .. i will defoliate the strawberry lemonade day 14 and the healthy one at day 14 and defoliate the other one at day 21 maybe

Well growmies this one is another keeper that's for sure 👈 couldn't of asked for better Genetics 😉 My all time favorite 😉 She was a stretchy girl unlike her normal traits in the past as this is the third time I've grown her , I absolutely love the Afghan Kush 😳 😍 😅 All 3 plants are truly Amazing , I would definitely recommend 👌 The Gorilla Punch 👊 OG Kush 👌 Afghan Kush 👍 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34

Day 28: Decided to do some LST as the dark green leaves are getting better! These babies are growing strong 💪 I am still very gentle with the feeding, and that are going to continue until more is needed Day 32: The girls have fully recovered from the LST. They already was 1 day after. Everything seems to go smooth so far

Yeah pretty decent this week. It didn't grow loads but it's looking pretty green and healthy. Changed the nutrients to bloom gradually. I think it's gonna turn into a weed bonzi which will be cool. She wasn't showing any sign of flowering just yet and is probably transitioning, so I thought Id do a quick defoliation to get the light on the lower bud sites and better air flow. Any observations, advice or tips are very welcome. Happy to answer questions too. Thanks for looking! Baboon

Everything is going like it should be)

another uneventful week. the girl is still creating nodes like crazy ... she is growing sideways rather than rushing for the lights. i raised the lights higher to about 12" from the top of the leaves. i also changed the nutrients from a seedling recipe to an early growth stage recipe that is richer in nitrogen with a higher ec 1.2. i also got to see the roots for the first time, they are looking really nice - white and fuzzy. i made the main nutrient tank more permanent and relocated the used nutrient and fresh nutrient tanks in their own chamber so, it's even easier to do manual nutrient changes (1 container in and 1 container out sort thing). later on, in the week, i noticed the main roots showing a little discoloration, not sure if i should be concerned about this, but she looks healthy.. it was fun using the doser again as i really hate mixing chem's since my days in chemistry labs. looking forward to new aggressive growth this week.

Day 69: Plants are growing fine, and looks healthy, only problem is the weight. Some of the stems are needing a little support, and I just moved the pots closer to the tents sides, to give some support

Almost skipped a week. So this is the 4th week of 12/12 lighting. Not much to see, alot of stretch and building is bud sites. You can find my YouTube channel at "Ben Chasin' Big Budz"... Thanks for stopping by.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ We planted 5 seeds, our goal is 2 plants of this strain for this 4x4 (all extra plants will live out in the 5x5)..we're using a brand new light for this grow, the Solux350 by Hortibloom! 💡🌱(https://hortibloom.com/products/solux-350-led-grow-light)... This tiny fixture emits a ton of light for its size..we have 20 seedlings under her, hung at the recommended 24inches and at 25% power..I'm really excited to see what this light is capable of! Thanks for dropping by and happy harvests everyone!! ❤️💡🌱😽💨 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -The Solux 350 uses an aluminum heatsink (no fan) for quiet operation 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Many units may be daisy-chained via RJ14 and dimmed from a single controller 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

It's been steady so far, I'm excited about this lady right here. I just Transplanted her into the living soil bed!! I'll be giving the plant PH balanced water the next couple days! So today I also decided to super crop her and get this Plant started on some training she's gonna love it! Let's

.