Got environment mostly dialed in thanks to an additional cool air intake fan, can get 450w mh nice and close for good penetration. Beginning the process of Lst, I’ve wrapped some plant straps around the base of each plant to anchor them, and straps at the top of their stems, giving them a slight bend. I’ll slowly increase the bend over time in order to avoid possible damage. The Gelato OG seems quite vigorous compared to the Widow so far. Starting to bump up nutes, runoff @400ppm -10/28

Took some clones & defoliated/lollipopped I started building a veg tent and went with a 2x2 AC Infiniti equipped with the 4inch cloud line duct system was a boring grow week.. ready for flower

Everything is goin by smoothly I started to give them silica. I topped them and did some LST but the have since then recovered well I will be switching to flower In the next two weeks or so but everything is filling in nicely with new bud sites popping up each day. Happy Growing gromies

Noticed some yellowing on sour kush a on Monday I do check ph and ppm overall smells nice critical purple finally taking off sticky buds on b and c

Well the girls are swelling up and smelling fantastic this week.Noticing the trichomes really building up lately.These papaya cookies are a very resilient strain as I’ve battled heat and humidity for a large portion of the grow and they have been doing great.Its been a blast watching these girls grow and develop.Will update later on in the week also I’m keeping light intensity set at 60 percent power because that’s what seems to make the happiest.Ive tried to pound them with light and added a co2 bag but they did not like the heat or extra light.I used some organic Unsulphured Blackstrap Molasses to add some sugars and a dash of epsom salts for a little more Magnesium.Ive been back and forth in my brain with the light intensity and Day 52 now set at 80 percent power.Reading some reviews of this strain she is a sun lover I believe so I’m just going to let them have it.Some of the fan leaves are fried some curling and fading but the new growth looks healthy and the buds are looking amazing..I’ll give them a final haircut later on this weekend.Day 55 the buds are maturing the pistols turning bright orange and trichomes building up making some very frosty buds :).I can’t wait to smoke these girls 🥦🔥😎.

Increased EC

Hey fellow green thumbs! 🌿💚 We’ve just wrapped up the third week of flowering with our Auto Fast Pete and Auto Northern Dragon Fuel from Super Sativa Seed Club. The excitement continues as our ladies flourish and develop beautifully. Let’s dive into the details! 🌟 Week 7 (Third Week of Flower) Progress: Day 43-45: Bud Development and Light Schedule Change • Auto Fast Pete: Pete is continuing to bulk up, . The aroma is intensifying, and the plant is stretching slightly under the new light schedule. 🌿🌸 • Auto Northern Dragon Fuel: Dragon Fuel is showing impressive bud development as well. The change in light schedule hasn’t slowed her down one bit. 🌱✨ Day 46-48: Adjusting to 12/12 Light Schedule • Light Schedule Change: This week, we changed the light schedule to 12/12 due to another autoflower in the tent that wasn’t flipping. We couldn’t take any risks, so now all our plants are on a 12/12 schedule. This adjustment has been seamless, and our ladies are adapting well. 💡🕛 • Environmental Conditions: • Temperature: 31°C • Humidity: 51% • Reservoir Details: • TDS: 400 • Temperature: 18°C • pH: 6.2 Maintaining these conditions to optimize bud development and plant health. 🌡️💧 Day 49: Observing and Fine-Tuning • Auto Fast Pete: The buds are continuing to grow and mature. The plant’s overall health is excellent, with vibrant green leaves and strong stems. 🌿🌼 • Auto Northern Dragon Fuel: The bud sites are more defined, and the plant is showing no signs of stress. The foliage is lush, and the buds are dense and sticky. 🌱🌟 🌟 Care Tips: • Light: Adjusted to a 12/12 light schedule to ensure consistent flowering across all plants in the tent. The plants are responding well to the change, with no signs of stress. 💡 • Autopot System: The Autopot system ensures a steady water supply, reducing the need for frequent manual watering. This system is great for maintaining consistent soil moisture, which is crucial during the flowering phase. 🌊 • Nutrient Monitoring: Keeping an eye on the reservoir’s TDS and pH levels to ensure the plants receive the right amount of nutrients and minerals. This week, we’re focusing on organic soil nutrition supplemented with regulator and CalMag. 🌿 • Environment Control: Maintaining a stable temperature of 31°C and humidity around 51% to create the perfect conditions for flowering. Adjusting airflow and positioning to optimize plant health. 🌡️💧 🌟 Genetics Spotlight: Auto Fast Pete: • Characteristics: Rapid bud development, strong structure, and early resin production. This strain is living up to its name with a fast and vigorous flowering phase. • Future Expectations: Continued bud swelling and resin production. Anticipate dense, aromatic flowers ready for harvest in the coming weeks. Auto Northern Dragon Fuel: • Characteristics: Robust structure, dense bud sites, and resilience. This strain is showing great promise for a high yield and potent flowers. • Future Expectations: Significant bud growth and increased resin production. This plant is gearing up for a heavy yield. 🌍🌿 Fun Fact: Did you know? 🌿✨ A 12/12 light schedule is typically used to induce flowering in photoperiod plants, but autoflowers can still thrive under this schedule, especially when sharing a space with other plants that need the light cycle adjustment. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Week 7 marks the third week of flowering, with both Auto Fast Pete and Auto Northern Dragon Fuel showing remarkable progress. The buds are developing beautifully, and the plants are thriving under our optimized care regimen, even with the new 12/12 light schedule. Stay tuned for Week 8, and happy growing! 🌿💚✨ #SuperSativaSeedClub #Week7Report #FastPete #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚

Week 10 6/9-15 Lemon ladies love the outside. Both are showing yellowing leaves so everyone is getting nutrients with feedings. 6/13 heavy defoliation and limb removal for lemon cake since she's now in flower. Repositioned the scrog after defoliation so the thicker limbs are in the mesh. Drizzle, got light defoliation mostly yellowing fans. Before and after pics and vids. I saw a Japanese beetle on my Lemon Cake and some small holes in the leaves so I added 1/2 tsp neem to the feed solution 6/12. Also started using fish & kelp. I'm still watering 1 gal per plant when I feed. With the heat and humidity, I water daily.

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Girls keep stretching, #1 doing big stems with hedgehogs, water only this week. 💪 Just let Grow, will do a defoliation in the next week. 💧 Give water each 2/3 day 2 l Water Only PH @6 💡Mars Hydro - FC 3000 50% - 28 cm Mars Hydro Fan kit Setting 8 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - GG4 Sherbet FF🌲🌲 https://2fast4buds.com/us/seeds/gg4-sherbet-fast-flowering

Hello! Hello! This week has been another solid week in the books. I did quite a bit of defoliation this week as the ladies were in need of it. Wanted to open up some airflow for them as well as get some of those lower bud sites some light. I am currently feeding about 3 gallons a day as these girls are drinking quite a bit. First gallon I feed is from the extra I mixed on res change for the week, then I have typically been going with RO water and Cal-mag for my other two. I am still learning and figuring out feedings, but so far so good this run. I am thinking I should have done a second trellis net as well, they just keep stretching, but seem like they should be pretty close to done, but still more than I anticipated. Quite a bit different from my first run, those plants were super short and bushier, more of the typical Indica style. I think its definitely easier to defoliate and train these plants, but that could be my knowledge has grown a little as well. No plans to do anything else to them other than monitor the environment, keep up with my res and monitor that, and make sure these light penetration and airflow is good! As always, any tips, comments, questions, or recommendations always appreciated and welcomed! 👊👊

Como estamos , aquí seguimos de confinamiento pero entre buenos humos y hoy toca actualizar las farm cheese de genofarm, A estas alturas e de decir que ya entramos en la recta final y estoy completamente satisfecho con esta variedad. Crecimiento rápido floración mucho más rápida cogollos compactos y llenos de resina, eso que hablo de que quedan varias semanas entre lavados y demás pero muy bien. Sigo controlando ph 6.2 humedad 50% y temperatura en 26.5 . Y estos resultados gracias al ts600 de mars hydro. Esta semana Añadi overdrive importante al final de una floración, para conseguir mejores resultados, nos vemos la semana que viene, buenos humos fumetillas.

Remember, when I said I was having a little fun, I was not kidding don’t do you see that nice looking Pringles can it took a lot of work, but I’m not gonna leave her in there with her entire life. She’s most likely going to get transplanted when it’s time to put her to flower other than that you see the others. They look good as well. Even the one my friend gave me I brought it back to life and man I thought I was doing something wrong because she has a major purple stem and her genetics I guess.

The roots of my plants are growing incredibly, I will move on to the flowering period in the 3rd week.

Bloom week 1: I don’t really have too many pictures of this plant in veg. I didn’t plan to bloom her, but after some training she just looked pretty good. This plant is huge compared to my other 2. She’s about 6 months old. I’ve only fed this plant about 3 times. I fed her yesterday for the first time in probably about 2 months. The plant looks good considering I’ve give her such little love. Hopefully with regular feeding she will blow up… but not too big for my tent I hope.

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Everything went good the first week overall. I’m struggling to keep my humidity up in this tent even with a humidifier running directly in the tent. Outside the tent the room is 25% and my flowering tents are also in this room and sit around 40-50% inside. So I’m thinking I’m going to grab one of those fans that is controlled off your humidity value or a humidity controlled relay and continue to run my humidifier directly in the tent. If I shut off my outtake fan humidity skyrockets quick, but so does the heat, so I need something to turn on and off my fan relative to my humidity in the veg tent only and hopefully find that sweet spot of temp/humidity. May be a bit pricy but I think it will be worth the expense to keep my seedling/veg tent humidity up at the proper levels while still being in the same room as my flowering tents and still be able to keep them at 40%-50%. My humidity basically is the last piece of my puzzle I need to get under control in my grow room to have everything dialled in across all my tents. But we are making do until then, just a pain having to fill this humidifier 3 times a day...lol if I can control the air intake better I should be able to run the humidifier at a lower setting and use less water. Roots are just starting to leave the basket now, I have been taking a cup of water from the bucket daily and pouring it over the rock wool and pebbles back into the bucket to keep everything wet. Still running just strait water, I think I will be adding a very low dose of nutrients this week as they are at that point soon. That’s it for this week, be back again next week! Cheers💨

In solo 24h ha sviluppato la radice e dopo altre 24 è uscita fuori dal terreno. Ha un colore un po' chiaro. Si sarà stressata con il trapianto in terra.

Come on! ;)