7/27/25- Week 7. I see flowers starting on the plants but they are probably just pre flowers but actual flowering is close now. I just fertilized them again with the above nutrients in a 5 gallon bucket. We went from a heat wave and drought to plenty of rain at the end of July so they are approaching 6 feet tall now and just big bushes.

8.2.20 day 2 Rise a&b to 3.5 ml/l and new water mix. Some leaf getting burn on the side and purple color below ,probbly its in the genetics. 10.2.20 day 4 What a grate smell and color just wow. 11.2.20 day 5 No comment .

After some consideration I decided to move the DoSiDos back inside for her last stretch of blooming. The heat in the greenhouse caused her to foxtail and the buds became less compact. I have a tent I mostly use for drying, but with a 100W Led it can be transformed into a temporary home for the DoSiDos. I'm watching her closely the coming days to make sure she isn't too stressed and starts growing bananas. As I had hoped the buds are growing mode dense by the day. Instead of foxtailing outwards the buds are now just growing upwards and continue to swell. Not too many brown pistils just yet, so the buds will keep growing bigger for a while.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Va creciendo poco a poco mi watermelon zkittlez

ph meter is broken. i use ghe liquid to read ph lol ph goes down every night. 650ppm is still too high for this strain, drinks a liter everyday i need a bluelab ph/ec meter 2 Februari: the buds start to appear on the hydro plant with thc everywhere lol

Final days before the cut! I'm starving the plant, by adding no nutrients. The chlorophyll in the remaining fan leaves has substantially dropped. The glitterying trichomes are densely packed and mostly cloudy. By the beginning of next week, will be the day

I gave the 8 Ball Kush and the Blue OG a full 9 weeks in flower , we started the trim yesterday and will finish up today , now it’s cleanup time and get the room reloaded with 8 Ball Kush and Zombie Kush, I will update next weekend on final weight.

Done. Harvested ALL on Day 72 - one LCC was very heavy on amber trichomes, one BPP and one LCC were what i consider optimum, and one BPP was VERY milky, like peak potency. very few amber. Interested to try them all! Total Drying time was 7 Days for both LCCs and 8 Days for both BPPs. I decided to do my first proper dry trim. For two plants i hit the spot and could just shave off the remaining leaves. For the other two it was much more of a hassle. They already smell way better than my previous runs where i dry trimmed. Also the colors are awesome for both plants that purpled. Smoke review will have to wait some time. Right now, all of them are curing.

At the end of week 6 the buds are bulking up and the trichomes are going milky with red hairs pulling in will wait for more amber trichs before harvest which I anticipate around week 8-10.

●69 Grams after 7 days hang dry. ●Harvested at 62 days trichomes are all milky or starting to amber. Will post pics and weights when dried

have not gave any nute will give first feeding on the next watering when i transplant to 3 gallon pot i gave about 4 oz of water today on 5/10/24 i transplanted from the lil pots to 3 gallon pots i amended my soil pro mix organic premium with 1 cup of fox farm happy from all purpose and 4 tbs of bone meal

Looking like 3 more weeks until harvest. I’m going to start flushing in about 10-12 days

“The Wock” 7 Weeks🤙🏾 Ladies are crushing its! I’ve for sure found 2 phenols I want to keep going based on structure and growth. The first was actually going to be a throw away. I didn’t like how lanky she was in her solocup stage. I instead topped her to slow down lateral grown and threw her in a 2 gallon bag to do her thing. She is now in a 7 gallon bag and has the best structure of them alll IMO. My 2nd pheno is a Tri-leaf mutation and it throws tops like no other! The perfect mother plant and is why I chose her as pheno #2. The 2 plants that were topped at the 5th node are bushing out more and more, just like it like it. There are 2 natural growing plants are doing great as well. They have nice bushing with one main cola. All plants will be defoliated 5 days before flip. The nose coming from these ladies is LOUD and I mean LOUD! Sour Candy and Burt Fuel! I’ll be taking cuts and flipping these ladies soon! Happy Growing PSGX Family! 🚀PSGX to the 🌕 #Phant0m

D08 - 02/10 - 4 girls of 5 are very close to the ScrOG net. I think I'm going to tied'em up tomorrow. I decided to wait to cut off the lower branches of the other girls because I need more time and I don't want a quick grow. D09 - 03/10 - Still waiting D10 - 04/10 - They are arrived. Made first LST to keep'em down... D11 - 05/10 - continuing LST. Very strong girls ! D12 - 06/10 - I'm impressed how the mother plant is strong. So are the clones, just incredible. D13 - 07/10 - Made a big defolation and topped the main branches. All the girls must remain down, else I'm going to have big issues ! D14 - 08/10 - Continuing LST under the SCROG. I cutted the secondary branch trying to do a main lining.The girls are very hard to manage, I think I'm go to double the scrog waiting to move them in the other room.

This is the first day of the first week of flower in the first video and the 6th day of flower in the second video.. you can see me shit myself when I saw that one of my main top sights snapped from tying the branch down … the lights were using are lights we designed and are testing at the moment also we are trying to keep a good distance between the tops and the lights to keep the temps down around the bud sites ! You can tell there are a couple other strains thrown in there the one purple punch from Barney’s farm is just Caking on nodes upon nodes like it’s impossible to get light to them unless they are pulled down in really liking the structure of the ocean fruit and am looking forwards to the finish!

Last week I fought some yellowing of the leaves. Did some small adjustments on PH to keep it in the 5.6 range. Seemed to stop it from progressing. For Week 3 Veg I topped the plants. I plan to flip the lights at the end of week 3 and move into flower. Day 15 I continued to have yellowing leaves even though I had everything looking right. (Added Pic). I decided to look into the PH to see if I was having issues with it. I have a meter in the water 100% of the time taking a reading every 1 sec. It all looked right. But I decided to Calibrate it in 4,7,10 solutions. Found out that my meter was off. So new to the check list is to calibrate the meter before each grow. I was thinking my PH was High, when in reality it was low. put in some PH up to get it back to 5.5 and over the last 16 hours things look pretty good. Leaves look darker. Day 17 Things are looking good. Leaves are getting darker and new growth coming in. Day 18 Turned room temp down to 73F from 76F. Fearing it is warming up my res tank too much. Day 19 Starting to get yellowing again. checked everything and can't find a good reason for it. Did notice some cloudiness in my res tank. Added 2 ML/Gal of peroxide. have Hydroguard on the way to help. I'll be adding more fans this weekend. I have light air movement currently. Also found a few spider mites and sprayed Greencleaner to all plants. Current environment settings: Room Temp 72.74 F Room Humidity 63.63% (After spraying, Trending down). Room CO2 589PPM Tank PH 5.70 Tank PPM (500 Scale) 953 Tank Temp 74.05 F Day 20 Recalibrated my EC probe just to be sure it was also accurate. wasn't off by much. Dialed back my flooding to every 5 hours to encourage Rooting. <-- Strong roots = strong Plants Sprayed for mites