Processing
Likes
5
Share
From/Desde: 14/07/18 || To/Hasta: 20/07/18 From day/Desde día: 43 || To day/Hasta día: 49 -----WEEK SUMMARY----- The Lemon is very dense in vegetation, lower Colas are growing very vertical soon i will fix them to the pots to perform a bit of LST. At the end of this week i will perform a topping on the main branch. Also this week i finally found trips everywhere, and how not... white flies. Is the first time i must fight with this creatures, and i wasn't able to erradicate trips with neem and preventives, so i've been hunting them until the end of summer with forceps. -----SUMARIO SEMANAL----- La Lemon tiene una vegetación muy densa, las colas inferiores están creciendo muy verticales, así que pronto las ataré al tiesto para darlas un poco de espacio y obtener mayor iluminación general en la planta. Al final de esta semana también le haré topping a la rama principal. También esta semana he encontrado trips y mosca blanca por todas partes. Es la primera vez que he de luchar contra estos bichos y no he sido capaz de erradicar los trips con neem y preventivos, por lo que los he estado cazando hasta final de verano con una pinzas.
Likes
49
Share
@Roberts
Follow
Green Cure CBD is growing great for a solo cup. She appears to be starting to bulk. She has a nice layer of frosty forming on her full of cbd goodness. Everything is looking great. She is very hungry, and thirsty with the limited root space. I removed some lower bits, but not much. Nothing else to report at the moment. Thank you Medic Grow, and Zamnesia seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
3
Share
@blaze454
Follow
Hasn't been much. Feeding and letting her grow Taken allot of smaller buds of that will not develop. The canopy is pretty tight but i have the 4 fans going 2 high & 2 low should be giving plants enough breeze. Starting to bulk a bit. Going to be starting the flush this week and adding allot of sugar.
Likes
28
Share
strong and healthy cannabis, buds are turning pink
Likes
19
Share
@Budha420
Follow
Day 45: just a quick vid. Been busy soz for posting so little. Day 46: Buds are densing up and mutant is doing mutant things. Lightburn is an issue Day 47: today i tried to fix the mutant problem. Its growing wayy to big for my small 180cm tall tent. Broke one of my light hangers when i tried to tighten it😑 also did some lst but i think the battle might be Lost on this one. Any advice is taken! Other than that, #1 n #2 are doing pretty well. Buds are densing but not at the rate i would want. Might be Bcos my light only draws 200w from wall. Day 48: these ladies are getting frosty swear to god if my light doesnt pull enough watts to dense the nugs, im callbombing spiderfarm till i get new light🌚
Likes
18
Share
@Roberts
Follow
The plant grew pretty well. She smells of pine and oranges. Very frosty colas on her as well. The last Blue Dream I grew was a awesome smoke. Thanks again Medic Grow, Athena, and Spliff Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
5
Share
I accidentally used distilled water in the the Gelatos waiting around 6 hours to see any changes.. Checked PH of distilled was 5.79. Before that errors it has been water with a PH of 6.65 and have been doing very well.
Likes
99
Share
Gracias al equipo de Anesia Seeds y al de MarshHydro, sin ellos no sería posible esta hazaña. 💐 🍁 Purple Boost Highness es una variedad híbrida sativa dominante (70% Sativa / 30% Indica) resultante del cruce de Dankberry y Star Pebbles, dos variedades extremadamente potentes y versátiles. En un proceso de selección de varias etapas, seleccionamos plantas que tienen un valor de THCV particularmente alto y al mismo tiempo un alto contenido de THC. Terminamos desarrollando una cepa que tenía todos los rasgos que queríamos: un nivel de THCV particularmente alto combinado con un sólido nivel de THC y una abundante producción de sabrosos cogollos. Purple Boost Highness alcanza un nivel medio de THCV extremadamente alto del 5-12% y un nivel medio de THC del 28%. Esto la convierte en una cepa potente y especial que ofrece a los usuarios medicinales y recreativos muchos beneficios y un subidón excitante y versátil. El subidón tiene un componente calmante a la vez que energizante de principio a fin y lleno de claridad cerebral, motivación y concentración. El subidón comienza en la cabeza con una elevada sensación de felicidad que te envuelve por completo, transportándote a un estado de pura serenidad mental y ligereza trae. Te libera de pensamientos negativos y deja que tu mente vuele cada vez más alto. Te llenarás de dicha y desarrollarás una creatividad desenfrenada. Tu cuerpo está relajado y ligero. A medida que aumenta el subidón te vuelves extremadamente sociable y hablador hasta que los efectos cerebrales se vuelven demasiado fuertes y te pierdes en tu propia mente. Purple Boost Highness es un gran expansor sensorial: los colores, los sonidos y la música adquieren una profundidad y versatilidad totalmente nuevas. Los cogollos tienen un intenso aroma dulce y afrutado a bayas y uvas con un toque de limón. Los cogollos son extremadamente densos, grandes y cubiertos de una gruesa capa de tricomas cristalinos de color blanco dorado. 🌻 🚀 Consigue aquí tus semillas: https://anesiaseeds.com/es/product/purple-boost-highness/ 💡 Mars Hydro TS 3000, como la lámpara de cultivo LED más grande de la serie TS, ofrece suficiente cobertura para un área de 4 × 4 pies con un precio asequible y rendimientos de calidad; a cambio, se puede aplicar tanto al cultivo doméstico como al cultivo comercial. Potencia - 450w Cobertura Vegetal – 5×5 pies Cobertura de flores - 4 × 4 pies La opción abrumadora para la mayoría de los productores que la aplican en tiendas de campaña. Consigue aqui tu lámpara: https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 📆 Semana 9: Finalizando la etapa de maduracion,esto va que vuela 😍, la resina esta cada vez mas presente ❄️ , los cogollos empiezan a madurar Esta semana seguirá el TS-3000 de MarshHydro al 100% y 30cm de distancia. Se estan desarrollando mejor que nunca, con una floracion mucho mas rapida, noto una gran mejoria gracias al Marshydro TS-3000. Continuo con defoliaciones Agua hasta el final
Likes
10
Share
@Its_Fruz
Follow
Big bud stop 32 day Overdrive start 33day Terpinator 1 of 10 days 4ml/l all flowering phase
Likes
47
Share
This week I decided to recruit my husband to get a proper look at this girl's roots. She's gotten so damn big that it's impossible for me to get a shot otherwise. Her root ball is massive. She's large and in charge. I went through and gave her another thorough round of defoliation. What I removed was any droopy leaves in the underbrush, as well as any fan leaves that were casting shadows and blocking light from my bud sites. When I was finished, I was able to stand over my plant, look down, and visibly see through to the base of my plant and grow media. Being able to do this suggests to me that my light source is also able to penetrate down throughout the plant as well. The removal of these leaves also contributed to improved air circulation and decreased humidity - both which are important as we progress through the flowering stage. This week I also caught my first whiff of this plant's sweet aroma. I'm excited to see how her terps develop over the upcoming weeks! 😋😋😋 I cloned another branch off this plant. Baby Tester FF3s are slowly taking over my house. 😂 Thank you for following along! This has been so fun! ✌️ 💜 🌱
Likes
8
Share
@Lazuli
Follow
Hairs are still white but what a huge weight this plant has
Likes
4
Share
@Zelfiris
Follow
Welcome to my next grow/experiment! Amnesia haze holds a special spot in my heart ever since I experienced it at the Amsterdam cannabis cup in 2012 - really looking forward to this one. I have plans to top once and hopefully be successful at making a clone to reverse. From there I’d like to maybe make some F1, and S1 seeds as well as breed it with the cultivar sharing the tent: Mephisto’s White Wedding. Started off germinating on Saturday 2/3 by soaking the seeds in a cup of water for 24 hours before transferring to a wet paper towel. On Tuesday 2/6 tap roots were present and they were moved to rapid rooter plugs and put into a humidity dome. On 2/11 they had sprouted up 3” and were transferred to the top fed RDWC system. Filled the reservoir following General Hydroponics 10 part chart at light strength and diluted by 50%. SE7000 is ~30” above at 40% providing ~270ppfd.
Likes
44
Share
**Encontrarás la traducción a español al final de la descripción** From/Desde: 10/05/19 || To/Hasta: 16/05/19 From day/Desde día: 78 || To day/Hasta día: 84 You can find the Money Maker Diary here: ** Podéis encontrar el diario de las Money Maker aquí:** https://growdiaries.woodroom.tel/diaries/25667-gorillamakingmoney-gorilla-vs-money-m -----IMAGES & VIDEOS----- 5 - HomeMade Organic & Cheap CO2 generator (more info in week summary) 9, 10, 11 & 12: The bud on the right is a Gorilla one, the buds in the left or/and in the middle are Money Maker ones. 15 - Same Gorilla plant buds, one affected by CO2 in the roots and the other not. -----WEEK SUMMARY----- The smell is more sweet and intense every day, friends that came home turned them eyes into crystals when they see this little babys. The size isn't awesome, but the high ammount of buds full of crystals plus the strong sweet aroma makes them awesome. Buds are growing and fattenning very very well. This week i added a boost of HomeMade CO2, i never measured the results of this invention so i can't give CO2 measurements. This method is widely used in home aquariums and there is where it comes from. For those interested i'm going to write here more detailed instructions. The 4 liters i've made will last for about 2 weeks. ---NEEDINGS--- - 250 ml Bottle - 6~10 l Bottle - 400 g Sugar / l water - 1 Envelope of organic baker's yeast / l water (CHEMICAL WILL NOT WORK) - 3 mid plastic tubes 40~50 cm - 1 short plastic tube 5~6 cm - 4 tube adapters - Hot glue to seal adapters The process of creating CO2 is simple, mix water, organic yeast and sugar in a bottle, and the sugar will free CO2 in the process of fermenting to alcohol due to the yeast. 1. Make a hole in the center of the big bottle cap, insert an adapter and secure it with hot glue 2. Make 3 holes in the small bottle cap and glue the other 3 adapters 3. Link both caps with one of the mid tubes and insert the other tubes on free adapters 4. Insert a short tube in the bottom of the small cap in the adapter that came from the big cap 5. Watch the Video!! -----WATERING CALENDAR----- Plants are beginning to drain the pots a bit faster so from now on i will raise the water ammount on each watering day 0.25 l. 11/05/19 - 1,5 l with All week nutrients -(Nirvana & Blombastic) also Big Bud half dosed @ PH6.4 & 2 E.C. 14/05/19 - 1,5 l with Bud Candy, Big Bud, Nirvana, B52, Bud Factor-X, Sensizym & Blombastic @ PH6.4 & 1.5 E.C. *****ESPAÑOL***** -----IMÁGENES Y VÍDEOS----- 5: Generador de CO2 casero, barato y orgánico (más info en el sumario semanal) 9, 10, 11 & 12: El cogollo que sale a la derecha es de una Gorila, el de la izquierda y/o el de en medio son de una Money Maker 15: Dos cogollos de la misma planta, uno afectado por CO2 en las raíces y el otro no -----SUMARIO SEMANAL----- El olor es más dulce e intenso día a día, los amigos que vienen a casa a verlas se quedan ojipláticos al verlas. El tamaño no es una maravilla, pero la gran cantidad de cogollos llenos de cristales añadido al aroma que entra por las fosas nasales las hacen increíbles. Los cogollos crecen y engordan de maravilla. Esta semana he añadido un boost de CO2 casero, nunca he hecho mediciones de los resultados por lo que no puedo darlas. Este método es ampliamente usado en peceras caseras y de ahí saqué la idea. Para aquellos interesados dejo aquí instrucciones más detalladas. Con los 4 litros de agua que he preparado yo da para unas 2 semanas. ---NECESITAMOS--- - Botella de 250 ml - Botella de 5 a 10 litros - 400 g de azúcar por litro de agua - 1 sobre de levadura de postre orgánica (LA QUÍMICA NO FUNCIONARÁ) - 3 tubos de plástico de tamaño medio 40~50 cm - 1 tubo de plástico de tamaño pequeño 5~6 cm - 4 adaptadores para los tubos - Cola caliente para pegar y sellar los adaptadores El proceso de generar CO2 es simple, mezcla agua, levadura orgánica y azúcar en una botella, y el azúcar liberará CO2 en el proceso de fermentación a alcohol. 1. Haz un agujero en la tapa de la botella grande, inserta un adaptador y séllalo con cola caliente 2. Haz 3 agujeros en el tapón pequeño y haz lo mismo con los otros 3 adaptadores 3. Conecta los 2 tapones con uno de los tubos y conecta los otros 2 tubos a los adaptadores restantes 4. Conecta el tubo pequeño en la parte libre del adaptador del tapón pequeño que viene del tapón grande 5. Mira el vídeo -----CALENDARIO DE RIEGO----- Las platas comienzan a secar los tiestos un poco más rápido, asi que de ahora en adelante incrementaré 250 ml de agua adicionales en cada riego. 11/05/19 - 1,5 l con todos los nutrientes semanales -(Nirvana & Blombastic) BigBud mitad de dosis @ PH6,4 & 2 E.C. 14/05/19 - 1,5 l con Bud Candy, Big Bud, Nirvana, B52, Bud Factor-X, Sensizym y Blombastic @ PH6,4 & 1,5 E.C.
Likes
14
Share
@AndrewC
Follow
This week, I tried to LST them in the beginning of the week, but the stalks were flimsy and weak. I put a fan on them with a significantly more vigorous wind :) This helped, then I tried to LST train with my bending clips, the distance between the nodes was still to close. So I raised the light 2 inches, which helped, I figure by 2-3 days from now, I will be able to start the proper LST. I also flushed the res and put in new water and nutrients. Some of the plants are showing what appears to be Cal/mag deficiency. So I added an increased dosing into the res, I then took about 10ml of the mix and put it into the small res's at the bottom of the AutoPots to give a boosted dose to the plants directly. Other than that, this grow is *boomin*. I'm very happy with the progress, and these plants are thick, bushy and growing like crazy.
Likes
5
Share
This plant seems to have grown much denser and better than my first plant. I just got the ac infinity ventilation setup with controller 69 for my 2x2, still trying to learn, hopefully grow #3 goes even better. Stay tuned