Did LST and topped Pheno 1 & 2, 3 is too funky to mess with. I think PH was just my issue and possible too high intensity light as I lowered to 60%, but also brought my PH to 6.5 so I'm guessing that helped too.

Hey fellow green thumbs! 🌿💚 The day has finally come—our Auto Northern Dragon Fuel from Super Sativa Seed Club has been harvested! After an exciting journey, we’re thrilled to share the details of this incredible plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our beautiful Auto Northern Dragon Fuel was harvested yesterday. After weeks of careful nurturing, the time was right to bring in this amazing plant. 🌿🌼 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Northern Dragon Fuel: • Bud Structure: Dense and sticky, with an impressive trichome coverage. The buds are beautifully formed, showcasing the robust genetics of this strain. • Aroma: Even in the drying phase, the rich and potent aroma is unmistakable. Expect a delightful scent that hints at the powerful experience to come. • Trichomes: A thick layer of trichomes covers the buds, promising a potent final product with a great flavor profile. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Northern Dragon Fuel: • Characteristics: Known for its robust structure and dense buds, this strain has shown remarkable resilience and impressive bud development throughout the grow. The final product promises to be potent and flavorful, thanks to the thick trichome coverage and rich aroma. • Harvest Expectations: High-quality buds with a strong aroma and potent effects. The slow drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ Drying the entire plant slowly helps retain more terpenes, which are responsible for the plant’s aroma and flavor. This method also helps preserve the potency and quality of the buds, resulting in a smoother and more enjoyable experience. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week’s harvest has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Northern Dragon Fuel at Day 75 has been a rewarding experience. With the plant now drying, we’re eagerly awaiting the final product. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a high-quality harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney

Day 42-49: I had some growth this week primarily on the R3 and some on the CbDream. Very slow on the R2. I’m wondering if it’s just sub par phenotypes. Idk anymore haha. Just waiting to see what happens here. Don’t think I’ll pack it right full next time. And try to concentrate more on 8-12 tops on a manifold rather than 30 smaller ones. Live and learn. I bought an Inkbird heat and cooling controller, seems to be holding my temps and 77 in the day and 69 at night. I decided to go back to week 4 ratios to see if that helps, they aren’t overly different so we’ll see. Runoff for Cali Kush and R2 which are closer to the heater is 5.75 1000 and R3 and CbDream is 6.05-1.2 1400, so plain water for the next couple waterings.

Esta semana ha sido un poco raras ya que tengo dos criaturas que no me está gustando su color y la forma de sus hojas que son la B y la C. La B ha ido tomando un mejor color pero la C pareciera cualquier planta menos de canabis y lo peor del caso es que el la criatura B encontré unos insectos. Son en realidad millones pero no maltratan a la criatura. Es la la única que los tiene. Gracias al que me pueda guiar. Les dejo el vídeo de los dinosaurios insectos

Day 35 - This lady is growing very strong & already getting frosty! Is showing a few signs of deficiencies so I’ll be giving her a bit of nutrients to see if that help! Thanks for following & happy growing friends!✌️🏼🙏🏼🌱

Welcome! In this grow we have: 2x Platinum Wedding Crasher 2x Gelato 41 1x Sour OG 2x Lemon Kush Germination/Rooting - 14 Days 9/17/21 - The clones look good in solo cups of soil. We will transplant into 5 gallon pots in the grow tent after they fully root in the cups. 9/18/21 - Looks like the clones are doing well in soil! We are so excited to grow these out. The clones came from a very highly respected grower. 9/19/21 - No ugly growth. All clones look amazing! We upgraded the light to a Mars TSW 2000. 9/20/21 - They are looking good and most likely rooting throughout the cups. I’ll give them a little bit of water today. I want the roots to go looking for the water so I’ve kept them slightly dry. 9/21/21 - They look happy. I will let them just do their thing… We are waiting on our Mars TSW 2000 light to show up anyways. No roots visible from the drainage holes in the cups. 9/22/21 - Looking really healthy and growing nicely. I’m excited for them to fully root in the cups so we can transplant them into the tent. The Mars TSW 2000 should be here in the next few days. 9/23/21 - Looking so good! We can’t wait to get these under the Mars TSW 2000 in the tent. They smell and look great. 9/24/21 - The clones look really good except for one Sour OG. It wilted and died, roots did not take unfortunately. I have a Lemon Kush started from seed we will grow in place of the dead Sour OG. Today we got our Mars Hydro TSW 2000 light. We will be hanging it and updating with pics/videos. 9/25/21 - They look amazing. Lots of growth while rooting. 9/26/21 - So far so good. Watering when the cups get light in weight. In just a few days we will be transplanting. See the video for today, we hung the Mars Hydro TSW 2000! 9/27/21 - Watered them yesterday, they look healthy. The Lemon Kush isn’t a clone, it is from seed. It’s the smallest girl but it’ll perk up quickly. 9/28/21 - Transplant day!! The clones are looking really good and it’s time to transplant into the 4x4 under that Mars Hydro TSW 2000 at 50% intensity. Check out the pictures and videos from today!

This week went pretty well. I ended up attaching a line to each corner of the plant, and tying it off to the pole in corner. This really opened up the plan, and exposed a bunch of lime green that wasn't getting quite enough light. Other than that, I switched to ripening nutrients for these last two weeks or so, and I plan to flush her for five days or so. I am thinking about 2 and a half to 3 weeks until she is ready to come down. Temperatures are getting high again in my region, but I am able to hold about 78 degrees F in the tent, and about 42% RH. Not much to do until harvest time, just wait and hope that piglet continues to fatten up. I hope everyone had a great weekend, stay safe and Blaze On!

It was a good, busy week. The clones are down, dry, and now jarred. Total weight from them was 5oz. I didn't think I was going to get more than 2oz because I didn't put much effort into them. However they all turned out pretty solid for growing led and soil 😎 The mothers come down in 9 days and I'm definitely looking forward to seeing how dense those will be! I'm pretty sure a certain someone is going to be donating to some polar bears 😏 because I'm damn sure getting more than 2.5oz per plant 😎 That's about it for now, happy growing everyone ✌️🍀✌️

Empieza el engorde con el monster bloom, los colores y los olores !! 1/10se riega con agua 3/10 se riega con pure zym, sugar royal, green sensation. Último riego con fertilizantes 5/10 se riega con agua

GTH SEED #1 in training, just super cropped on one side to even conopy. The first site im recording will be a clone,it is on back side of plant and will not produce. #2,#3,#4 pics,#2 is stripped of leaves at about 12 inches. 06/16/18 #4 is showing pre-flowers,#2,#3, no sign yet. #1 check in the morning. 06/19/2018 Still no pre -flowers on #1,#2,#3, #4 however is female so I Fimmed her to encourage side shoots to grow biggest of wider canopy. #1 reacting well to supercropping 20 tops as of today. Praying she is female🙏🙏. She is a stretchy girl in flower 2 to 3 x her vegged height so trying to be low profile as possible.👍

W15 (8-5 to 14-5) 8-5 Temperature: 26.5 degrees (lights on) 20.1 degrees (lights off) Humidity: 58% (highest) 45% (lowest) Opened the reservoir for a couple of minutes. Set the light to 80% strength. 9-5 Temperature: 28 degrees (lights on) 21 degrees (lights off) Humidity: 61% (highest) 42% (lowest) No pictures. 10-5 Temperature: 28.6 degrees (lights on) 21.4 degrees (lights off) Humidity: 60% (highest) 40% (lowest) Added 10L to the reservoir. Dry weight: Gorilla Kush #1: 4.0 kg. Gorilla Kush #2: 4.5 kg. The temperature outside is getting hotter, so the tent is warming up quite a bit aswell. The 2 Gorilla Kush plants are not liking the high temperatures, not a good sign :( 11-5 Temperature: 29.8 degrees (lights on) 20.7 degrees (lights off) Humidity: 59% (highest) 31% (lowest) No pictures. Opened the reservoir for a couple of minutes. 12-5 Temperature: 30.1 degrees (lights on) 21.2 degrees (lights off) Humidity: 51% (highest) 36% (lowest) Opened the reservoir for a couple of minutes. 13-5 Temperature: 31 degrees (lights on) 21.8 degrees (lights off) Humidity: 53% (highest) 40% (lowest) No pictures. Opened the reservoir for a couple of minutes. 14-5 Temperature: 28.7 degrees (lights on) 20.6 degrees (lights off) Humidity: 60% (highest) 39% (lowest) Dry weight: Gorilla Kush #1: 5.6 kg. Gorilla Kush #2: 5.6 kg. Added 8L to the reservoir. Opened the reservoir for a couple of minutes.

Do-Si-dos auto is doing great. She was lollipopped today, and a selective defoliation In the canopy. She is stretching and developing more bud sites as well. Hopefully the stress doesn't bother her. She is ready to flower now. Nothing more to report. Thank you Medic Grow, Athena, and Zamnesia seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Planet Of The Grapes (Ethos Genetics) Week 3, Day 25 Flower The far left and the far right plants are doing great, That top dressing i gave them made them perk up, Only issue is the middle plant, it still looks deficient, Might have to give her some compost tea and add some more 4-4-4 and worm castings.

Good day to all my friends and visitors here on GD. Decided to finally finish this diary, I took my time with his one ;) Now we cut the second POGP auto plant, the first cut you can find in week 17. The plant from week 17 weighted 660g. wet, this one finished at 1,85kg. wet. The girls where autoflower but thanks to me starting this grow in cold day temps (14 degree Celsius) the started flower really late, maybe that's also the reason for all my problems with this strain during the grow?! The two plants where different phenotypes, the smaller one (from Week 17)though small had nice hard flowers, the bigger one as the only plant from four I grew during the growop started foxtailing. Both of them branched nicely the smell was quite strong and awoul xD like gasoline and something rotten, it smelled so bad i checked a couple times under microscope for any signs of mold in the flower and to my suprise I found nothing. Thank God later during drying the smell would subdue to a more generic "hazediesel" smell -------------------------------------------------------------------------------------------------- SE7000 done it's magic with this grow as with all my other grow ops. For anyone who is interested in obtaining this efficient and affordable light fixture ($ to gram) here's the link: https://spider-farmer.com/products/spider-farmer-upgraded-se7000-730w-commercial-led-grow-light/ A shout out to SSSC for the gift of genetics: supersativaseedclub.com/ Thank you all for your companionship on this voyage, I hope you enjoyed it at least as much as I did. Also thank you for this awesome year together here.

Welcome to week 13 of my grow diary. It has finally happened. The plant is starting to flower. Now the most beautiful phase of the plant begins. Keep your fingers crossed that the weather stays good until the harvest and that no mould will form. Fast Buds estimates a flowering time of 7 weeks. Let's see if this is correct or if she needs a little longer. See you next week ✌️

Offers a unique flavor profile with earthy and garlic notes. High THC content makes it a favorite for concentrates. Order Now 🔥✅ Chat Telegram @cerianberigam