Was such a pleasant harvest from start to finish, no issues at all. A tip for next time would be to have the SCRoG lower as I couldn’t really tuck any node sights this time round, smells absofuckinglutely amazing from 3RD week bloom onwards!

Well, I reckon the girls have reached the end and it's time to chop. Trichomes are mostly milky (some amber), so now it's a matter of getting some free time and cut them down. Thanks to all those who follow me on this journey. It won't be long til I start a new experiment in Piquillo's Lil Lab. Of course I will updated before putting them in jars. Happy growing! 😉

Greetings and salutations GD peeps. Let the peaceful transition of flower begin! It is the first week of flower and the scrog is filling out nicely. I had some issues with a GFI popping and my lights would miss a few hours in the 18/6 light shedule over the last week. Rather than stress them any more than they already have been with the mini blackouts I flipped them to flower this week. I also changed the circuit the Tent was on and it seems to be consistent. A massive feeding this week for early flower, I bumped the bloom by 2 ml/gal on top of the normal feeding chart. My rational is I have topped these ladies and there are far more bud sites than before, will see if it has any effect + or - I have also done some selective defoliation to promote light pentation to the lower bud sites that have branched out from the topping 2 weeks ago. I have a small number of LEDs on one of my lights that have stopped working. The light an older amazon Chinese cheap O has 85% of the lights working. My footprint of the tent to the w/sqft is with in range. I have read and heard 35-50 watts per square foot of area as a general rule is good. now you can get in to PAR and lumens etc. but that's a whole different conversation. The light might be why the GFI was popping? I will figure that out after the grow. for now its all about FLOWER POWER and the scrog fulfilling its destiny. peace ya'll be kind to your fellow humans and hybrids.

Hey everyone A fantastic week here. No rain, temperatures around 27°/32° Celsius and nights are not colder than 16° with low humidity. Sounds perfect huh 😃 This week the buds really started bulking up. A good smell too and not to stinky so far. I'm glad with that to be honest 😂 no need to attract the neighbors. Gonna make some daylight pictures too tomorrow. Just got home from late shift. Sun just went down while doing this update 🙂 I gave a good feeding this week. All nutrients were 4ml on 4 to 5L of water (6,4Ph) No signs of nutrient burn and i guess the PH in the soil is right. One leaf is showing brown marks and is dying but that's the only leaf for 3 weeks now. Guess she doesn't receive enough light or the plant used it as food when there wasn't enough water left. LST is good but i really see mistakes in the lower canopy. Some buds don't receive enough light. I cut away a few leaves but i don't wanna do too much. Trial and error year for sure. Will learn and know a lot for the next grow 😃 This girl has 3 to 4 weeks left i think. Next week will probably be the last feeding. Will wait to see how she develops. Gonna water in one more time with Neem Oil too. So far so good. My easiest grow ever 🙂 (I jinxed it now 🤦‍♂️) Happy growing everyone 🙏

10/14 #1　Day156　23Week　Outdoor(Guerilla) Harvest&Drying #3　Curing　Day31　＠boveda62% #4　Curing　Day34　＠boveda62% #Clone☓1　Curing　Day26　＠boveda62% #Clone☓3　Curing　Day14　＠boveda62% #Clone☓5　12/12　 #Clone☓4　12/12　short-day Day37 #Clone☓3　short-day Day4

LST proved effective. Looks almost ready to switch to flowering.

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Totally happy with the defoliation and LST seems to be doing trick

Erntezeit! Getrocknet wurde 9 Tage bei ~55% Luftfeuchtigkeit und 20 grad. Trocken getrimmt. Alle Popcorn nugs und Verschnitt zu Hash weiterverarbeitet.

Buds making new calyxs with tiny stems week 8/9

Day-43. Girls looking good. Still in the transition. One of the StarD girls has really had a growth spurt. Using next to no nutrients. 02/05/18-Day 48- Very pleased with fast buds, my first AUTO grow and they are taking off a treat, much easier to grow than photoperiods. But then again I treat them similar in terms of just defoliating as normal and LST'ing. Probably a little bit more sensitive to nutrients.

Hello amis cultivateurs 🌿🍁 Encore un jolie début de semaine . La Pure Skunk Go Fast ce remets totalement bien des topping précédents ✂️🌱 Elle repart avec vigueur, je réfléchis a ci je continue le topping ou pas . Franchement je vais en relancer je pense vraiment que cette demoiselle peut faire vraiment faire des choses de dingue 🤤❤️ Merci Kannabia encore une magnifique variété 🍁❤️

On day 70 they both went down. The trichomes showed the were ready. The last week I kept the girls in the shade a bit during the day. We´ve had temperatures close to 40 degrees C. I didn´t want to expose them to too much heat.

10 semanas desde germinación día 11 de abril hasta corte viernes 25 de junio (día 69 corte) cultivada en maceta de 11 litros con tierra plagron all mix, inicio de floración en semana 5, día 20 de mayo

Week 10: This will be the final update before Harvest: I will update post harvest after the dry and weigh. Day 64-66: Hmm these 4AM are a strange bunch lol. I seemed to have been wrong about 4AM#3 getting better in last week's update, after reviewing the pictures. After realizing this I decided to continue feeding the plants till the end albeit only Calmg and Boost(micro). I decided to give 4AM#3 a 125% dose of Calmg on Day 66. I was worried about root rot because even though she was a bigger plant she drank noticeably less water than the rest. I actually forgot to mention I have had a few fungus gnats during the grow starting at around day 35. I always let the plants completely dry out even until some leaves were really drooping from thirst, so I though I had them under control. I never noticed more than 1 or 2 at a time, which is also why I thought I had it out of control. Maybe they have something to do with 4AM#3's state, but I doubt it. Anyway, 4AM#1 and #2 are doing well. #1 has fully ripened with almost 95% cloudy trichomes, and some amber. #2 on the other hand could still use 7-10 days extra, but regretfully I cannot harvest then... #3 is at about the same stage as #2. Day 67-70: Sadly I noticed too late, but that extra strong dose of Calmg seemed to confirm my suspisions... 4AM#3 had a heavy calmg deficiency... It really is noticeably improving this time! Leaves are regaining some slight saturation! And she drank her water very quickly this time! So bummed about having to harvest this weekend... Day 73... Oh well next time I will be able to harvest more freely and at different times for each plant if needed. She still has a good bit of cloudy trichomes on her calyxes though, around 40-60%, and very very few ambers, but her sugar leaves are already full of them. As for 4AM#1, looking great! gona be the smallest buds but definately the most dank! 4#2's massive buds are still having trouble staying upright, but looking forward to those for sure! RED ALERT: Shiiiit... So as I was watering 4AM#3 on day 69, I noticed, what I'm pretty sure is, BUD ROT! Damn, I'll have a picture as part of this update. I had very bad experience with bud rot last fall(planted my autos too late in the summer, lost over half my plants and had to harvest early), but that was with 10C temps and 80%+ RH. I have FOUR fucking fans in this damn tent, and it's always over 20C! But I'll be honest, I knew if it was going to happen, it would be THAT part of the plant positioned closest to that oscillating fan I have on the peace of wood... The bud closest to it(in the corner) is in it's blind spot, doesn't get direct breeze on it. And that's the bud, and the ONLY bud that seems to have been affected. Strangely though, this bud rot feels different to the touch than the one I had last summer. Very dry, and like I said, very isolated to that ONE little part. I cut it out and have the rest of the bud drying as a tester in my room. And my entire room STINKS. I seemed to have been wrong about that last week also; The 4AM smells so much stronger than the White Cracks. See you after the Harvest!! ;) It's been awesome and a fun learning experience!

Georgeus strain smell taste energetic and beautiful buds with bloody red with tricomes snow 😎🙌🏻

Привет садовники !

7e semaine de floraison, Application du propolix contre le début du botrytis qui a commencer semaine dernière, la gorilla a du être infecter depuis que le tronc c'est fendu en deux. J'ai pourtant pris les precaution nécessaires, pour l'instant aucun autre départ de botrytis ca a l'air sous contrôle le produit a l'air efficace, j'ai acheter un ventilateur uniquement pour elle j'espère l'aider et non propager le fleau sur mes autres plant..

18.5.25: I watered with 3ltrs of dechlorinated water PH'd to 6.4. I added Per 6.5 litres; ♡ 1Tsp Sea K(elp) ♡ 1/2 Tsp Bud Explosion PK booster ♡ 7ml Trace PH: 6.4 PPM: 780 I added the PK booster this feeding, just to provide some phosphorus without risking an excess. Next time, I won't use it. ☆ Xpert Nutrients PH down, up to 1ml. ☆ Ecothrive Neutralise 1 drop per litre from the 1ml pipette, which is attached. This is my dechlorinator. 22.5.25: Well, I had a total disaster with my HulkBerry. My tall, oscillating fan fell over and smashed straight down on her. 3 tops broke, so I had to improvise. I made the repairs and took the photos in under 5 mins. The next morning, the branch closest to the camera had fallen again, attached by only a small membrane. Amazingly, she had turned all the leaves, now on the floor of the tent, upwards towards the light. I patched it up again, and she's not looking too bad. However, I'm going to have to be exceedingly careful when watering the two other plants and moving the pots. I'm going to need to add support, stakes, maybe. I will think of something, no doubt. After all this occurs, I taped her up and watered. I fed 3ltrs of dechlorinated water PH'd to 6.4 with; ♡ 1/2 Tsp of Ecothrive Biosys. I also added ♡ 3ml of Xpert Nutrients Cal-Mag amino acids. I figured she would need some nitrogen and the building blocks to heal. N5-P0-K0. I will water again with the same today. Send some healing vibes 🍃✌️💚🤞🌱😊 24.5.25: I watered with Ecothrive Biosys 3ltrs each. The plants are still drinking at least 2 litres per day. They are increasingly thirsty, and it's important that I don't let them dry out. The soil is mostly coco and perlite, so it can dry out quicker. There are plenty of worm castings, too, so that definitely helps. The buds are developing and progressing very nicely, keeping up with the flowering nutrients and alternating between Ecothrive Biosys, Trace, and Greenleaf Nutrients. 25.5.25: I watered with 2.5 ltrs of dechlorinated water PH'd to 6.3 I added Per 6.5 litres; ♡ 1Tsp Sea K(elp) ♡ 1/2 Tsp Bud Explosion ♡ 7ml Trace PH: 6.3 PPM: 840 SOLUTION TEMP: 30°C SOIL PH: 7 SOIL TEMP: 21°C AMBIENT TEMPERATURE: 23-26°C RELATIVE HUMIDITY: 58%. Thanks for stopping by 😊🌱🤞💚✌️🍃