All in all there were some major mistakes I made myself in which I can honestly say I think has affected the yield and quality to some extent. As this was my first use of the equipment for this run. After everything I have learnt on this run I hoping the next one there will be no errors at all.

11/20/23 - Day 14 - Today the box flipped to Veg state. I made the decision in the software yesterday, its take effect the next day at the light on schedule. The system will do a couple of things now that it's in Vegetative mode. Lights will remain at 18Hrs On/6hours Off, however the intensity will slowly creep from 30% intensity to 100% within a couple of days. Air Temp will remain the same at 79deg. F Humidity will go down to 50% Water temp and PH will remain the same, 64.5deg. F and 6.0Ph Because I have it all hooked up for Auto water. It started the first video about 1 min after lights on. It drained the water, refilled it. After it refilled it, it turned on the air stone, started the water temp cool down, and it slowly over the next 30 minutes delivered nutes, and finished it off with balancing the PH. All of this was done on its own. I DID NOTHING. Other than verify because why not. I sat back and watched the system work. This time around with everything hook up for auto I really am not doing much. The hardest part of this grow so far is not opening the door while the light is off. the rest of the week I don't expect to do much. I will update daily with pictures and things that I am noticing. This is an Auto strain. I am a little worried about growing an Auto in this box. usually, I can control the growth utilizing the lights because I'm space limited. This time the plants going to flip to flower on its own. I'll need to make sure I am training and cropping early on. 11/24/23 - Day 18 - Everything is starting to get aggressive in there. I say that because the new nodes are growing out of new nodes on the top. It's like its packed full of plant and it all wants to come out at the same time. The leaves have more serrated Leafs than I have seen on any of the other strains I have grown. Ill post a picture of the last time I grew this strain. I did it in Coco Coir. It will be cool to see the differences. 11/25/23 - Day 19 - The Leaves are all reaching up, and the plant is growing so fast! Its such a bushy plant.

10/8 was harvest day as a storm collapsed my plant, I should have set up support but live and learn

-Pretty close to being done but trichomes are not ready yet. I usually like about 70% cloudy and 30% amber.

🍼Greenhouse Feeding BioGrow & Bio Enhancer ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱 FastBuds 420

RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea

Another great week down!! The 4 Pre98 Bubbas an 2 Dirty blondes are just doing so amazing, reacting real nice to the toppings, getting bushy an building nice structure! I want these girls to sit an just pig out before we decide when they are ready for flower an we can make the switch! Let’s grow lil babies let’s grow!! Hope you all enjoy an have an amazing productive day keep them eyes peeled for next week ! Peace love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨💨💨🤙🏻

Week 11: Blueberry Auto - Harvest Day & Sweet Dreams Ahead! ☀️ Yo growmies! Harvest day is coming for our Blueberry Auto queen! Those folks at Royal Queen Seeds weren't lying - 11 weeks and this beauty is ready to meet the shears! The trichomes are looking milkylicious, like a frosty breakfast of champions, with nary an amber one in sight. So, it's going to be chop chop time in a few days! A quick shoutout to the German sunshine for working its magic these past few weeks. You rock! The Blueberry Auto's smell is getting sweeter by the second, like a blueberry bush that fell headfirst into a candy factory. Seriously, I can almost taste it already! Speaking of taste, the wait is almost over, guys! This harvest is about to get chopped, dried, and smoked faster than you can say "Blueberry Dream!" Let's give her a few more days in the sun, growmies, because next week, we'll be diving into the smoking experience and letting you know if this Blueberry Auto lives up to its sweet, sweet reputation. High fives all around!

This week was an absolute scorcher with daytime temps in the low 30C, but we had no rain so I had to water more frequently. Seen a lovely burst of growth after last week's nutrients. Decided to bend and secure today to learn new technique. I'm fairly happy with the results. Think I might need to book up a scrog net worth all my girls after this training.

***Note that I started to count the days when I placed the seeds between paper towels. The seeds were planted 3 days later and sprouted from the ground 2 days after being planted. D80 (13/05/2021): I'm looking at the trichomes every other days. Glue Gelato is starting to show amber on top buds. No amber for Banana Kush and Gelato. This time I will chop them all at the same time so the one I will rely on is the Glue Gelato. As soon as she is ready, I will harvest them all. Banana Kush and Gelato would probably need more, but in term of logistic, I need to harvest all my plants at the same time. D83 (16/05/2021): Not ready yet. I'm checking trichomes closely! 😬 - Light: the lights are at 100% and at 12 inch form the plants. - Temperature: during the day: 24-25C ; during the night: 20C. - Humidity: the humidity is maintain around 46-48% all the time. - Air circulation: There is an oscillating fan on the ground, one fixed fan pointing on top of the canopy and one fixed fan to help cool the lights. - Water: I gave water every other day or when the ground feel dry or the pots feels light. - ***IPM: I never mention it but I'm using nematodes pouch as an integrated pest management. I had trouble with pest in my first grow and I learned from it. That's the only thing I do for pest and of course watching closely and regularly at my plants 😊

Week 3 and a repot is done and now in day 3. Finally it’s settling down after the repot, which was not pretty at all😂 Hope to get some massive plants this run 🌱 ________________________________________________________________________________________ Light from @MedicGrowLED 😎 NEO 780 LED🔥 780 Watt⚡️💥 PPF of 2184 μmol/s & 2.8 μmol/J🔥 Full Spectrum V1/F1 🌈 WiFi smart connection & Smart Aura Control 😱

Harvest time!!! Sadly one plant was taken by either an angry farmer or a lucky one, but the smaller plant did make it all the way. There´s things I will change next time around for huerilla growths in general. 1.) No more photoperiodic strains for outside grows. Takes too long and they hardly ever mature in my part of the world. 2.) I will add soil/nutrition for the plants next time. Now I have tried going the natural way and I´m happy I did. It was a nice minty smoke, but honestly I would liked more than 2 joints for half a year of waiting 😉

Welcome growfessors to another episode of growfessor theatre! 👽🌳💚 Tonight from the 4x4 the ladies move into week 7 and they get a change in nutrients. Out with Big Bud coco & sensizym, in with Overdrive. Removed dead & dying leaves from each lady, added a support stake in Mandarin dreams & LSD, they was leaning hard! Thanks for stopping by growfessors 👽🌳💚

Hey fellow growers! Week 3 of Bloom is completed, and everything has gone smoothly so far. The plants are well taken care of and haven’t shown any signs of deficiency. To be safe, I did another top dressing with worm compost, microbes, and fungi. I’ll keep you updated. If you have any questions, feel free to reach out!

I have applied some LST techniques learned in various online sources. I trust she will handle it well.

The leaves are a little bit dead but she will be potent. The buds looking great.

This turned out amazing was a free seed from a mate no idea where

* Week 6 Veg/Early Flower - She has grown a little over an inch and a half since last night (11.5 inches total ) - Veg nutrients will begin to be fazed out early this week to prep for flower* * End of Week 6 Veg/Flower - 11/4 - She has begun flowering ( 14 Inches ) - Hard defoliation on bottom small budsites as well as bigger fan leaves above.

420Fastbuds FBT2312/Week2 Weekly update for these 2. I started seeing some rust spots so I decided to add a little General Hydroponics Calimagic at 0.25tsp/gal to my feed. So far seems to stop. I also decided to start a very light dose of nutes General Hydroponics 3 part flora series at the same 0.25tsp/gal to every other feed to see how they'll respond. All in all Happy Growing.