Recommended
Likes
Comments
Share
Girls are stacking nicely ❤️ The one is a bit more finicky than the rest, she is showing signs of nutrient lockout/ ph , but should be easily corrected if I’ve diagnosed it properly. I ended up calibrating by ph pen and I was off by .15 on the scale, might not seem like a lot, but in flower it can be! Shouldn’t set us back too much 🇨🇦👊❤️
Likes
12
Share
The yeast fermentation is real. They were on a yeast fermentation regimen yesterday. Getting it again today. The effects are amazing. Day 17. - The ghetto CO2 generator did it's thing! They all exploded yesterday. I fed this morning @ full strength (1mL/L) Green Buzz Organig Grow Liquid, with about 1.5tsp molasses, and 1mL of Bokashi EM Juice (not bokashi tea, but the EM inoculant). After feeding I tied up and down. Ponytails for the top fan leaves, to expose the bottom nodes. And stakes to get the bottom nodes a bit more horizontal. Ahh. Free seeds. Who would turn down a free bean from Seedsman tagged 'Strawberry Cheesecake Auto'? Am I glad I gave her a shot. This plant is beautifully symmetrical and healthy AF. I'm really looking forward to checking out the strawberry terps in a couple months. I bumped up the smell in my diary to 'strong'. It's not flower smell yet, but the veg smell is reeking. A friend noticed it as soon as I opened my vent-room door. But the good news is that she said she couldn't smell anything before then. When I open the tent, it's so strong that it's dank already. Again, not a flower smell...but I've never smelled a stronger veg-oder than these. Nobody could ever convince me that yeast is futile or too much work. The growth from day 16-->17 was simply mind-blowing. I'm expecting more tomorrow, after the heavy feeding today. Day 20. So...some news. Yesterday I got the new fan. Freaking sweet- screw that clip on fan nonsense. And today, I've been busy. Non-tent related... I put together a worm farm. So I'm hoping for castings in a few months. Fed the bokashi bucket. I've had a problem with fungus flies (look like gnats, but live in soil). Elsewhere, notice that this falls under 'Non-tent related' :D. So I removed the top inch of soil in that houseplant, sprayed a soapy water mixture and covered with 1.5 inches of sand. I'm including this here, because I was terrified that those dudes would somehow find their way to my tent (on the other side of the house). But I think I've seen the last of them. Tent related... I watered with a nice castings tea that brewed for about 24 hours. I hope I didn't f*ck up. I hit GG and Strawberry Cheesecake with it before I pH'ed it down. So they got dosed at around 7.6. I went back to them and hit them with a cup of pH'ed tea (6.5). Then the light cut off, and it was their bedtime. I had to wait for LST until after their nap. But while they were on black out, I got a package. Some dope-AF smartplugs. I can now control my LED, my exhaust, and my air mover from my phone. There's a built in digital timer where I can schedule on/off's. And it *measures* my usage! :D How cool is that?! Welcome to the space age. I also got a USB microscope, which is also badass. So look for pics from that in the coming weeks... Later when the light went back on (courtesy of my new smartplug!) I went back and did LST and pics for today. Day 21. New dehum. :)
Processing
Likes
5
Share
@Ensign420
Follow
Week 02 Introduction This week has been a bit of a struggle. Had my first experience dealing with slime and brown algae. But I think adding enzymes and increasing the beneficial bacteria helped to fix the issue. Also experienced nutrient burn for the first time. My nutrient solution strength got as high as 671 PPMs. So backed it down to about 430 PPMs during the end-of-week reservoir change. Also cut Hydroguard (expired?), CaliMagic, and Superthrive from this grow. Now she's still stunted, but is starting to recover. Hopefully... [START OF WEEK 02] Day 01 - Monday - 08/10/20 - Total Days: 008 ----------------------------------- - [0830]: Still looks a bit yellow. But getting larger! --- Solution strength was at 248 PPMs. --- Just topped off with a bit of distilled water --- PH went up to 6.1 so PH'd down to 5.8 --- Ran the top feed for a bit to wet the hydroton. - [2130]: She's looking even more yellow now. --- Even the new leaves are really yellow. --- Decided to add more base nutes. --- Added 4ml of Sensi A --- Added 4ml of Sensi B --- Now at about --- Solution Strength went up to 304 PPM. --- PH was at 6, --- Also raised the water level a bit more. --- I really hope it's a nutrient deficiency and not an over-watering issue. --- Please live! Day 02 - Tuesday - 08/11/20 - Total Days: 009 ----------------------------------- - [0830]: Looking less droopy. But still yellow. --- Decided to do a reservoir change. --- 4.5gal of distilled water --- 8ml of Sensi Grow A --- 8ml of Sensi Grow B --- 8ml of Voodoo Juice --- 4ml of B-52 --- 4ml of CaliMagic --- 4ml of Hydroguard --- 4 drops of Superthrive --- PH'd down to 5.8 --- Solution strength: 302 PPM --- Since I didn't want to risk over-watering the rockwool, I did not to do a top feed, may do one tonight after the sleep cycle (lights are still set to go off at 10am and back on at 4pm). --- As I was doing a reservoir change, I noticed that the tubes and bucket were a bit slimy. Didn't really stink or anything. Is this normal? Maybe due to the Hydroguard and Voodoo Juice? --- I hope she gets better soon! - [2215]: Getting larger! But still yellow. --- Also can see a root growing through the net pot! Tiny little thing but it's there! Will have to start dropping water once more appear. --- After looking over a few DWC diaries using AN nutes, seems like my solution strength is still too low. Most around this stage average around 500 PPMs with about 4ml per gallon. --- Top fed for a minute to wet the top of the hydroton. --- Solution strength went down to 263 PPM. --- Added 8ml more of Sensi A --- Added 8ml more of Sensi B --- Now base nutes are at 16ml for 4.5 gal of water. --- PPMs went up to 411. --- Still lower than 500 PPMs, but that's okay. --- PH was at 6. Not sure if I should adjust PH using AN nutes. So going to not ajdust unless PH goes above 6.1. Day 03 - Wednesday - 08/12/20 - Total Days: 010 ----------------------------------- - [0830]: Looks like more root growth! --- She still looks yellow. But leaves are perky. --- PH was at 6.2 so lowered down to 5.8. --- Solution strength was at 394 PPMs --- Since roots are still growing, I decide to lower the water level a bit. Now water level is a bit below the net pot. - [2200]: Root is getting longer! --- Slime is returning. Not sure why. --- Solution strength: 357 PPMs --- PH: 6.1 --- Decided to add an enzyme along with more beneficial bacteria to hopefully cure the slime. --- Added 16ml of Sensizym --- Added 5ml of Hydroguard --- Added 8ml of Voodoo Juice --- New solution strength: 430 PPMs --- New PH: 6.1 --- Top fed for a minute. --- This slimy residue is really freaking me out! I hope the added enzymes will help eliminate the slime. --- Going to do a full reservoir sterilization/nutrient change over the weekend. Please survive until then girl! Day 04 - Thursday - 08/13/20 - Total Days: 011 ----------------------------------- - [0930]: I think the enzymes worked! There is little to no slime now! --- Although I think the root was also dissolved in the process. It's now just a little stub sticking just below the net pot. The enzyme is also suppose to dissolved dead roots too but guess that root was too weak? Not sure what happened there. But I think the slime is cured! --- Solution strength went down to 395 PPMs. Decided to add more base nutrients. --- Added 8ml of Sensi A --- Added 8ml of Sensi B --- Added 4ml of B-52 --- Solution strength went up to 598 PPMs. --- PH was at 6.1 --- As long as the PH is between 5.5 and 6.3, I'm not going to use PH Up or Down. But still will monitor PH levels. - [1715]: Checked up on her after her nap and shes looking alive but stunted. But no slime! --- Decided to add some sugars to help maintain the enzymes and beneficial bacteria. --- Solution strength was at 587 PPMs. --- PH was at 6.2 --- Added 8ml of Bud Candy --- Solution strength went up to 671 PPMs. --- PH also went up to 6.3 --- Lowered water level a bit to hopefully promote more root growth. --- Top fed for a minute. --- She is getting bigger, but still looks yellow. Day 05 - Friday - 08/14/20 - Total Days: 012 ----------------------------------- - [0915]: Leaves look a little burnt on the tips. Still no slime. --- Going to back off on the PPMs to hopefully fix the nutrient toxicity. --- Solution strength was at 632 PPMs --- PH was at 6.3 --- Added/Removed water until PPMs were at 536. --- PH was still at 6.3 --- Raised water up a bit, then top fed for a minute. - [2200]: Looking better. Still yellow though. --- Solution strength: 514 PPMs --- PH: 6.5 --- Added PH down. --- New solution strength: 518 PPMs --- New PH: 5.2 --- PH was kind of high. So decided to PH down. Had to use quite a bit to bring it down. But eventually got it to drop down to 5.3. A little low, but so far, the PH has always gone up so wanted to start it really low. --- Ran the top feed for a minute to re-saturate the top of the hydroton. Day 06 - Saturday - 08/15/20 - Total Days: 013 ----------------------------------- - [0830]: She looks stunted. leaves are still yellow. --- Solution strength: 514 PPMs --- PH: 5.6 --- Top fed for a minute. --- Not sure what to do at this point. Going to do another reservoir change soon. Hoping she lives until then. - [2145]: Looking pretty much the same. --- A bit of slime has returned. Since I've been diluting the nutrient solution, the enzyme ratio has dropped. So I guess this is expected. --- Also noticed that slime build up was on the air-stones. Never really checked the stones so not sure how long that has been there. Looks brown too, which can't be good. --- Going to do an H202 sterilization of the system (minus the net pot) tomorrow so did not add anything. --- Lowered the water level to below the net pot. --- Then top fed for a minute. Day 07 - Sunday - 08/16/20 - Total Days: 014 ----------------------------------- - [0900]: STERILIZATION DAY! --- Decided to skip today's night cycle for a deep clean. --- I'm hoping that skipping a night cycle won't be too stressful. --- Temporarily moved her to a new bucket. --- Used about a half of gallon of straight distilled water to flush out the net pot. --- Drained the system and wiped up all the brown sludge. Also removed the air stones and cleaned up all the goo. --- Filled the system with 2 gallons of distilled water and at least 30ml of food grade hydrogen peroxide (35% strength). --- Yea its a lot, but since I'm not going to sterilize the system overnight, I went with a really high doseage. Basically I kept adding until I started to see little bubbles start to form. --- Then I ran the water pump. - [0915]: Boiled the air stones in tap water for about 10 min. Then reconnected them to the airlines. --- I let the air stones and hose soak in the sterilization solution for about 5 minutes so the peroxide can absorb into the stones. Then ran the air stone to help mix and agitate the solution. --- Occasionally, I'd repeat the process of turning the air pump off for a few minutes to let the stones soak. - [1000]: Covered the top two row of holes of the net pot with some aluminum tape. Hopefully this solves the light leaking in through the hydroton. - [1200]: Used an old toothbrush and scrubbed the pump clean. Then drained the system. --- Refilled with more distilled water and peroxide. Again added a lot. --- Ran system again to sterilize even more. - [1530]: Drained the system and refilled with distilled water to rinse. --- Ran the system for a few minutes, then drained and rinsed again. --- Did this a few more times over about an hour. - [1630]: Added 4 gallons of fresh distilled water. --- Added 15ml Sensi Grow A --- Added 15ml Sensi Grow B --- Added 12ml of B-52 --- Added 16ml of Voodoo Juice --- Added 16ml Sensizym --- Solution strength was at 430 PPMs --- PH was at 5.6 --- I was going to add Hydroguard, but I think the bottle is expired. Since 2017 or 2018!? I think Hydroguard is good for up to 2 years from the date on the bottle or 6 months after opening. So not going to use from now on. I wonder if this could have contributed to the slime build up. --- Also removed the CaliMagic and Superthrive too. Going to only use AN products to eliminate the chance of incompatible nutrients. --- Placed her back in the bucket and top fed for a minute. --- Here's hoping for the best. Going to let it ride until morning! Please feel better! [END OF WEEK 02]
Likes
6
Share
этот сорт супер,он выдерживает все жару, холод, lst ,hst ,super cropping я делал все что мог,вывод такой что не трогайте авто сорта,пусть растут себе )))) 314 г но ребята он без воды стоял больше суток в гидропонике в темноте,так что он за сутки немного подсох,так что я не могу сказать что было вчера на весах когда я я отключил гидропонику и оставил на сутки в темноте без воды, на фотке видно что листья уже упали,так что было больше! будем ждать когда высохнут 😉 ну вот ребята что вышло )) 62 сухих, вкус и запах соответствуют описанию,я не могу в точности передать вкус,но очень вкусный! это растение получило очень много стрессов,я всем советую!!!!
Processing
Likes
16
Share
28 días de mis hermosas nenas... A una semana lo más probable las pasare a florar!!!
Likes
52
Share
@Rangaku
Follow
Girls are in their 25L pots now and are filling out nicely. Foliar spray and heat mats for off cycle . Will tie these down and start training them the next week .
Likes
28
Share
@Verbalist
Follow
Fairly easiest plant that Ive ever grew! Very resist and Phenotype was on point. Only veg’d them for 25 days and managed to fill the entire 2x2 (60x60cm) Scrog net. Flowering time was a bit longer than 49 days, but still doable. ## From seed to harvest it took 90 days ## ## Three plants yielded me about ~150g of dry product ##
Likes
14
Share
@SamDo
Follow
🇺🇸 Week 7 - Grow Journal of Mother Gorilla (Royal Queen Seeds) 🇺🇸 On the Way Back to Full Strength! After two tough weeks with overfeeding and water stress, I’m finally happy to see my plant bouncing back. The roots had taken a hit, and last week, I noticed my filter was way more clogged than usual. I believe the dead roots were broken down and flushed out, most likely thanks to Cannazym. I added it specifically to help decompose the damaged roots, and it seems to have done its job. Today, I checked the roots and saw that they have stopped browning and are beginning to return to a more normal color. They were previously quite dark, but now they’re showing signs of improvement. The root mass hasn’t regained volume yet, but I think it’s still eliminating waste. It’ll be interesting to see if more debris accumulates in the filter or if it remains clean from now on. Another great sign: my nutrient solution level has dropped, meaning the plant is feeding properly again. At the same time, my EC has decreased, confirming that it’s actively absorbing nutrients. This recovery is also visible in the canopy: it has become denser, allowing me to slightly top some central shoots that were growing past the screen and to continue working on the SCROG. The only minor issue this week was pH fluctuation. Over the weekend, it rose to 6.6, but I recalibrated it to 5.9 today. I suspect this is due to the plant still shedding dead roots, which could be affecting its balance. Either way, I’ll be changing the nutrient solution soon, which should stabilize things further. Current Grow Parameters: • Strain: Mother Gorilla (Royal Queen Seeds) • Light Cycle: 18 hours • Humidity: 70% • pH: Adjusted back to 5.9 after peaking at 6.6 • EC: Down to 1.1 after briefly reaching 1.3 - 1.4 • Training: Light topping in the center + SCROG work + selective defoliation for better light penetration Final Thoughts: Things are improving, but we’re not fully there yet. The plant is regaining strength, the roots are clearing up, and it’s feeding well again. I’ll keep a close eye on its next developments, especially root mass expansion. Excited to see how things evolve next week! See you next time for another update! ⸻ 🇫🇷 Semaine 7 - Journal de Culture de Mother Gorilla (Royal Queen Seeds) 🇫🇷 On est en train de revenir à la pleine forme ! Après deux semaines compliquées marquées par une surnutrition et un stress hydrique, je suis heureux de voir que la plante repart dans le bon sens. Les racines avaient bien souffert, et en observant mon filtre la semaine dernière, j’ai remarqué qu’il était bien plus encrassé que d’habitude. J’en conclus que les racines mortes ont été détruites et évacuées, sûrement grâce au Cannazym. J’avais ajouté ce produit pour faciliter la décomposition des racines abîmées, et cela semble avoir bien fonctionné. Aujourd’hui, en observant les racines, j’ai constaté qu’elles ont arrêté de brunir et qu’elles commencent à retrouver une couleur normale. Elles étaient auparavant bien sombres, mais leur état s’améliore nettement. Pour l’instant, la masse racinaire n’a pas encore repris en volume, mais je pense qu’elle élimine encore des déchets. Ce sera intéressant de voir si mon filtre continue à accumuler du dépôt ou si tout est désormais propre. Autre signe encourageant : le niveau de ma solution nutritive a bien baissé, ce qui indique que la plante se réalimente correctement. En parallèle, mon EC a également diminué, preuve qu’elle absorbe bien les nutriments. Cette reprise se reflète aussi visuellement : la canopée s’est densifiée, ce qui m’a permis de légèrement étêter certaines têtes centrales qui dépassaient du grillage et de continuer mon travail sur le SCROG. Le seul petit point de vigilance concerne le pH, qui a fluctué. Ce week-end, il est monté jusqu’à 6,6, mais je l’ai recalibré aujourd’hui à 5,9. Je pense que ces variations sont dues au fait qu’elle se débarrasse encore de ses racines mortes et qu’elle n’a pas encore retrouvé un équilibre complet. De toute façon, je vais bientôt renouveler la solution nutritive, ce qui permettra de repartir sur une base stable. Paramètres de culture actuels : • Variété : Mother Gorilla (Royal Queen Seeds) • Photopériode : 18 heures de lumière • Humidité : 70 % • pH : ajusté à 5,9 après une fluctuation jusqu’à 6,6 • EC : descendu à 1,1 après être monté à 1,3 - 1,4 • Taille & palissage : léger topping central + travail sur le SCROG + retrait de quelques feuilles pour une meilleure pénétration lumineuse En conclusion : Les choses s’améliorent, mais ce n’est pas encore complètement gagné. La plante reprend de la vigueur, les racines s’éclaircissent et elle recommence à bien se nourrir. Je reste attentif aux prochaines évolutions, notamment sur la masse racinaire. Hâte de voir comment ça progresse la semaine prochaine ! À la semaine prochaine pour un nouveau point ! 🤘😎
Likes
16
Share
Germinating 3 Purple Kush Feminised seeds. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? Seeds popped today:-)transferred 3 Purple Kush seeds in to small pots 10/09/23 3 Purple Kush seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :-) especially if your seeds were expensive. 11/09/23 no sprouts above the vermiculite yet, i will check it again tomorrow. Today 2 Purple Kush Germinate and rise above the vermiculite 3 days after sowing. Purple Kush is going ok, it could be growing faster, unfortunately i can't upload new photos because there is a problem in the GD system, they are doing there best to fix this problem as soon as possible. GMO Cookies where started 16/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. 3 seeds sprouted, but only 2 survived, it become to hot and one GMO Cookie sprout died. I have now started another strain (Party Monster) 19/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours, 5 seeds of Party Monster have sprouted and are under the same 100W LED grow light. GMO Cookies have all come up above the vermiculite and are now positioned under a 100W LED, there is a small clip on fan blowing and circulating the air. This is my second attempt to grow GMO Cookies from 3 feminised seeds, i messed up on the first 3 seeds, i put them under a 250 Watt LED and it fried them, my folt. Growing from germinating seeds is a very delicate situation, your environment temperature needs good control. 2 Party Monster seedlings are looking good, coming along well under the 100W LED light. 3 GMO Cookies are looking good also under the 100W LED light. Plus i have now started soaking in glass of water 03/10/23, 5 Strawberry Yields fem seeds aka Strawberry Fields. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 5 seeds will germinate by tomorrow? The 3 GMO Cookies fem seedlings are coming along well, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. 5 Strawberry Yields fem seeds have all sprouted and are above vermiculite, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. Also positioned also under the 100W LED light, indoor temp 29 degrees humidity 65%, still to hot for seedlings to be directly under lights due to high temp in the room. 3 Strawberry Yields sprouts are doing well, gave 2 seedlings away, no space for all 5 plants, coming along well under the 100W LED light. 27 degrees humidity 55% good growing conditions Super Lemon Haze I began soaking 13 feminised seeds SLH since 27/10, after 24 hours soaking 11 seeds opened in filtered water in glass, also added 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed! 1 Super Lemon Haze fem seed planted in a 2 ltr pot 28/10, this is the only plant i will keep for flowering. The Pot is Half filled with lite mix compost, and the rest of the pot is half filled to the top with Vermiculite , watered planting medium thoroughly soaking it before sowing seeds 2cm deep in vermiculite. The seed will push through the vermiculite easley with very little effort, in effect encouraging a higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. And i planted the 11 remaining popped SLH seeds in the brown round pot, this is just to see how many will rise above the vermiculite from the 13 SLH fems seeds soaked on 27/10. I will give these away to a friend. Both pots have been placed on a propagating heating mat for consistent and ideal germination temperature until all seeds have risen above the vermiculite. Once my 1 fem seed has germinated! i will cover the pot with a transparen plastic bag and place the pot 20cm below a 100W LED light. Super Lemon Haze feminised seeds Seeds sourced from Satdica Bulk Seeds Soaked seeds 27/10 planted up on 28/10, 12 out of 13 seeds have transformed in to 12 healthy little seedlings. 11 seedlings will be given away to a friend, and i will keep the one seedling you see already planted up in a black 2 ltr size pot. Now positioned under my 100W LED light, distance 15cm above seedlings. Light cycle 24 hours. Keeping them covered with propagating hood for a few days longer to allow seedlings to become better established before removing the hood. The vents on hood are fully open to allow seedling to slowly become accustomed to the outside vege room space. Gelato Cookies 3 Feminised seeds Satdica Bulk Seeds Popped 3 Gelato Cookies Feminised seeds today 06/11 filtered water or bottled water in a glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. After placing on propagating heating mat for 24 hours. This resulted in increased germination speed! and today i can see little white taproot tails protruding out from the seed husk 👌 3 Gelato Cookies seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. Spoon your seeds into it's planting medium, do not touch with fingers, spoon it in with half spoon of water and a seed, place the seed in the center 2cm deep in the planting medium, water it in again very lightly to help the seed settle into a comfortable position before leaving it to rest covered on your heating mat. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Watered and fed them in with Plagron Terra Grow 5ml to a ltr of water, i may have added too much, perhaps 2/3ml to a ltr of water would have been enough? placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :) especially if your seeds were expensive. 3 Gelato Cookies have come through the vermiculite, 09/11 and now they are positioned under my 100W LED grow light. I didn't expect all 3 seeds to pop, because 1 seed looked like perhaps not viable, because i only keep the bad looking seeds for myself and keep the best seeds for customers. I am keeping them covered with transparent plastic bags for a few days to protect them in case it's to hot in the 24/7 grow room which is 24 degrees, this is probably an ok temp for them? but i'd rather not run the risk. Romulan Feminised seeds Germinating 3 Romulan Feminised seeds 26/11 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? 27/11
Likes
4
Share
The plant looks super bushy and also very very strong and happy, she's growing super fast, and she's also enjoying life man, really happy to see this lady enjoying, she has been mainlain ed by removing the main stem and allowing the 4 secondary low ones to become the main ones, after that she got topped on each main apical and that's how we have now on week 9 this beauty, a fat runtz muffin bush! 😍
Likes
Comments
Share
@Robom069
Follow
Day67/68 lookin very good dont know what else to do than lettin them grow
Likes
15
Share
@Brickie74
Follow
First time trying this strain and seed company. I have an Altoids box that i lined with sand paper (120 git) i shake my seed(s) for about 30 seconds to a minute in the box. I then soak them in water for about 15-18 hours. When done soaking i put the seeds on a plate with paper towels until i get a tap root that is atleast 1/8" prefer 1/4". Then at that point i put them in a Jiffy Pod until about 1.5 - 2.0 inches.
Likes
1
Share
Aquí las fotos de esta nueva semana de vegetación para ambas plantas, cumpliendo así la white widow 23 dias de plantada y la zinfandel 16. La fotos corresponden al 21, 24 y 27 de abril. Por ahora no hay nada más que agregar. Ya que esta semana solo agregué algo de sustrato en ambas y el riego fue de agua reposada con una bomba dando oxígeno por 24hr y un ph de 6,1 a 6,5. Lo que no sé es si realizar alguna tipo de poda más adelante o si mejor las dejo crecer como son, ya que no sé mucho. Existe el temor de dañarlas o estresarlas demasiado. Lo pensaré, también recibo cualquier consejo u observación con ellas!
Likes
37
Share
@Stork
Follow
Time for drying. Btw drying them like this was a bad idea buds are pressed from one side may be conceded to move them, well I still prefer hanging drying 🤪
Likes
21
Share
Всем привет друзья! Решил попробывать фотопереодный, поднять от Барни и не только, смотри профиль. Это будет мой первый опыт с фотопереодными растенями. #Smail_Seeds
Likes
15
Share
@Lontra
Follow
Tag 22: 🌱: LST wurde etwas nachjustiert, um die Verschattung zu minimieren. Leider habe ich dabei eines der größeren Fächerblätter eines der Haupttriebe beschädigt (Stiel gebrochen) und musste dieses nun doch entfernen. 💧: Die Erde war trocken, daher wurde gegossen. Den Angaben meines Wasserversorgers und meinen Berechnungen zur Folge, habe ich das CalMag weggelassen und nur 0,25g/l Bittersalz hinzugefügt. Auch das Bio Grow wurde wieder auf die ursprünglichen 50% des Düngeplans reduziert. Insgesamt gab es ca. 2,5l bis zu einem ersten kleinen Drain. 💡: Die Beleuchtung wurde hochgeregelt, auf einen DLI von ca. 40 bei ca. 40cm Abstand zur Pflanze. Update: Abstand auf 35cm und Leistung etwas verringert (weiterhin DLI ~40), da sonst Temperatur zu hoch steigt. Tag 24: 🌱: Heute wurde erneut die Schere angesetzt (leider etwas verspätet, aber ging nicht anders). Entfernt wurden die unteren und somit innersten und äußersten neuen Triebe an den 4 größeren "Haupttrieben" und deren Fächerblätter. Um den Schock nicht zu groß zu machen, dürfen die nach innen wachsenden Fächerblätter noch 2-3 Tage dran bleiben. Zusätzlich wurde das LST noch etwas angepasst. 💧: Die Erde ist noch nass. 💡: Die Beleuchtung ist unverändert. Tag 26: 🌱: Heute wurde erneut die Schere angesetzt und die nach innen wachsenden Fächerblätter entfernt. Zusätzlich wurde das LST noch etwas angepasst. 💧: Die Erde ist noch nass. 💡: Die Beleuchtung ist unverändert. Tag 27: 🌱: Es ist der Beginn von Tag 27. Es wurden nur kleinere LST Anpassungen vorgenommen und das Blattwerk etwas sortiert um die Ausleuchtung zu verbessern. Die kleine Lady denkt anscheinend bereits daran in die Blütephase zu wechseln, zumindest zeigen sich die ersten zarten Pistillen. 💧: Die Erde ist noch immer feucht. 💡: Die Beleuchtung ist unverändert. Tag 28: 🌱: Das LST wurde für ein einheitlich hohes Blätterdach erneut leicht angepasst. Ich überlege in den kommenden Tagen auch noch einige der unteren Fächerblätter, die mittlerweile ziemlich im Schatten liegen, zu entfernen. Zunächst jedoch schaue ich, was der Stretch die nächsten Tage so bringt. So langsam macht sich auch ein leichter Duft bemerkbar. 💧: Die Erde war trocken, daher wurde gegossen. Heute gab es insgesamt 3 Liter der gleichen Wachstumsmischung wie letzte Woche. Das Bittersalz scheint auf jeden Fall zu helfen. 💡: Die Beleuchtung ist unverändert.
Likes
15
Share
@Growshh
Follow
Things are going smoothly, still stretching but keeping them under the screen.
Likes
3
Share
She is doing well with a lick of 300ml of nutrients the fuel dog is holding up so far with no leaf burn and healthy green leaves she stands at about 35cm