Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 15 since the time change to 12/12 h. Hi everyone 😀. This week there was a lot of stretch. The flowers begin to form and stretch the whole plant 👍. I actually wanted to remove the bottom shoots last week, but I won't do that until the next week. The tent was cleaned and all containers filled. Have fun and stay healthy 🙏🏻 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Bio Bizz Coco ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 .

It has been a great week of growth and no further accidental toppings - first pistils beginning to show at the end of the week. Tops are looking good, forming shape across the net. Stretched branches are being tucked under one square across every 3-4 days. The net is filling up nicely, with some limited pruning below the canopy of both leaves and growth stems. I'm trying to avoid any defoliation on this grow. Fertigating with an inflow EC of >1.4 seems to be moving the run-off EC higher - will maintain higher inflow EC until run-off is within acceptable range. Run-off EC Should be within 300 Points of Inflow EC. Run-off EC still remains below target although now increasing to where it should be. Tracking run-off volume/EC/pH at every fertigation event as I manage the feed EC to monitor what the plant is doing/feeding. Fertigation is maintained now to once a day (at lights on) to maintain the target EC. Light period is during the night time to better maintain heat/humidity conditions during light off period (which happens during daytime). ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The grow setup includes ; - Secret Jardin DS120W tent (120cm x 60cm x 180cm) placed inside the bedroom - Mars Hydro SP250 LED light - extraction fan - AC Infinity Cloudline T6 (gives me great control over the environment) - ventilation fans - aquarium heater for nutrients solution (for winter use only) - small oil heater (for winter use only) - small dehumidifier - 20L Airpots (as final pots) and 3.5L general plastic pots (for seedling stage) - Canna Coco substrate mixed with 40% perlite - GHE Flora Trio as base nutrients and various additives - pH and EC/TDS meters - 2x Govee Thermo/Hygro meters (one at canopy, the other at the roots level - these allow for external monitoring and recording) ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Some strain info from Royal Queen Seeds ; An amazing mix of genetics background - Its true genetics are unknown. Some say OG Kush is a mix of ChemDawg with a Lemon Thai and Pakistani Kush. Others say that it’s just a special cutting of ChemDawg from the early 90s. The most obvious trait of OG Kush is its strong, unique, very dank, slightly citrus aroma, almost like fuel or strong detergent. The flavour of OG Kush is equally as strong and dank, with a long-lasting aftertaste. Strong mental and physical high - OG Kush is an extremely strong cannabis strain, with most experienced smokers listing it as one of their favourites. The effect is as strong physically as it is mentally. Though its effect is like an Sativa, the strain's genetics are mostly Indica. The effect is as strong and complex as the flavour. OG Kush takes around 8 weeks to flower and on average the yield is 500 grams per plant.

10/2: My soil mix was too hot and I accidentally killed 11 of the 12 Fastbuds seedlings I had going. So, I started about 20 Candy Cane hybrids in rapid rooters wetted with myco, tricho, and beneficial bacteria. All but one popped up. One of them did a cobra-basket and petered out. The beans all came from tray trash that accumulated while I was smoking three diff strains, so I probably won't know what they are until they are flowering. 10/4: Looks like I'll have enough growing that I have to cull the weakest few. I can feasibly (possibly) squeeze 14 into the lower section of the closet under 720w if they act right and if I do some training, and another 4 in the top under 200w if I keep them at 30" or less in height. 10/6: I think I'll veg everybody in the bottom section until I'm out of space, then move the shorter 4 or maybe 5 into the top section as necessary...and move the tiniest ones outdoors to finish. I just don't have the heart to kill anything that's got a potential yield of a half-ounce or more. Some of the most diminutive plants I've grown produced the stankiest buds.. I've currently got the 200w 3500k+660nm running at about 32" in the middle of the closet, and one of the 3 pairs of 120w 3000k+660nm quantum boards running at about 36" and should be sufficient coverage for the next week or so. Then I'll kick on the pair of boards closest to the doorway and spread them out a bit..and then I'll move the 200w light to the top section along with the best 4 short plants. At that point I'll turn on the center 2 qb's and install a 2 foot Solacure Flower Power UV light in the perpendicular center channel of my frame. 10/7: I installed my new AC Infinity 6" fan in the attic and hooked up a 16" carbon filter today. I used some sound deadening foam on the rafter that I mounted it to and removed 100% of the vibration. I haven't programmed the thermo/hygro stuff yet, but tested it on high and I can't hear a thing anywhere in the structure.👍 I'm also purchasing a dual 120mm fan system from AC Infinity in the door, behind the grille I already installed to serve as fresh air intake. It also has a thermostat feature that will allow me to set it to only come on when the temps are too high, so I'm optimistic that it will allow me to manage the temperatures in this closet with about 1000w running for 18-20 hours a day.🙏 I moved the 200w 3500k+660nm to the top section today and lowered my QB frame to 32" above the plants. I have two pairs of them running now, and received the replacement HLG 240-48A driver today for the third pair. I'll hook it up later..dont need it now.. 10/8: I fed most of them today for the first time...about 16 oz of solution containing grow big, big bloom, kelp me kelp you, boomerang, and armor si. I hooked up the 3rd pair of qb's today....wow that's bright....they're gonna love it!😎 The last of the sprouts has been planted and is growing. That's a total of 19.... 3 of them still in 1 liter pots and getting plain distilled water. I also foliar fed all of them with a little big bloom and kelp me kelp you. 10/9: I got some Axiom to apply onto them tomorrow. It's got a good amount of Harpin a|b proteins which trigger rapid plant growth and other defensive traits that are proven to be canna-friendly, like enhanced resin production and increased resistance to molds, mildews, and fungi. I foliar fed them today with big bloom kelp me kelp you, and the day following the Axiom application I plan to foliar feed them with Biotabs BoomBoom Spray to negate any initial ill-effects caused by the Axiom. I'll probably just mist them with distilled water for a day or two following that regimen to ensure that it's all rinsed off. But, following that break in the foliar feeding routine, I've got some Fulvic/Humic acid to rain gently over them for a couple of days. 10/11: End of week 1, and I'm happy with their progress thus far.😀 They had no trouble with the "Harpin protein attack" I engaged them with yesterday... at all, and even look quite a bit bigger than I expected. They also had their first "night time* last night...4 blissful hours in 74f temps with 48%RH.💤

Oct 11th: (F55) Fertigation once a day with same recipe (950 EC 6.1 PH) watered until 10-20% run-off Oct 12th: (F56) Fertigation once a day with same recipe (950 EC 6.1 PH) watered until 10-20% run-off Oct 13th: (F57) Fertigation once a day with same recipe (950 EC 6.1 PH) watered until 10-20% run-off Oct 14th: (F58) Fertigation once a day with same recipe (950 EC 6.1 PH) watered until 10-20% run-off Oct 15th: (F59) First Flushing day 1 gallon each with 5ml/gallon of Flora Kleen Oct 16th: (F60) Flushing 2 gallons each with 5ml/gallon of Flora Kleen, Run Off is at 400 EC the target is 200 EC should have this in 1 day or 2 Oct 17th: (F61) Flushing 1 gallon each with 5ml/gallon of Flora Kleen

Hello colleagues! I have reached the end of the cycle, everything is going well. I like the obvious difference in the plant phenotypes, it is interesting to fully reveal each strain. Next week - watering with clean water, and we will be approaching the harvest. Thank you for stopping by, and be healthy! 🙏 To be continued... 😶

1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.

Week 9 Day 5 Bloom now 48h darkness

Fattening and stacking! That’s what’s up 😎🔥 The girls are doing well, no issues other than the tip burn (went a little hard on the nutes then dialed it back) I was very busy this week and had minimal time for the garden, the automation is key for success! I really should look into an auto water system to complete the process, but I love the time I spend and watering is one of those times you can get up close and personal and really view your plant and how it is doing from top to bottom. Only about 3 weeks left give or take, I can’t wait. The terps coming from these plants have kicked it up a notch and are intense! Like walking through a pine forest… that also has weed growing 👃🤤🌲, lol. Started with the Bud Candy from Advanced nutrients for the Mag/Sulphur and to help with the terpenes and fattening. I had impressive results with my last GG Autoflower using this product in the last 3 weeks, hopefully we can get a similar result. 🤞

MB is amazing strain from exotic genetix ,great teast and aroma and very powerful (absolutely greasy) Heavy yield and bery strong genetics

2024.09.12 D64 Its been two busy week, as i trim the 1 pond mother, get aknowledge that my wife use my grow sniper two pruned is badly infested rose bush, since 2 week and never proper clean it whith alcool.😱😱😱😷 in result a massive PM & mithe contamination in my grow tent... 😱😭😷😭 all plant have been shoot with H2O2 at 0.5% and set ouside for 2 day, wich turn to be rainy as f***, until i clean and serilized everything, twice and run the hepa filter .😷😰 the plant look ok, lightly over wartered, but no more pest or PM sign as they return in the tent.. 3 days later PM hardly bonce back, no choice to use more agressive treatment so they all have been shoot with saffer's defender 3 in 1. after 3 shoot in 24h and another tent desinfection we should have get rid of it 🙏 8 day laters everything look fine👍, all damage leaf have been removed, i also prune some unrelevant lower and inner grow

Send help... the Pineapple Express has taken over the tent... she’s massive at 44-45” tall currently... stretch slowed down but she’s past the light at this point and even light angled doesn’t hit the very top of the main colas just yet. (Back left of tent) White widow looking great for the lollipopping method I used on her(front left of the tent) White widow 2 growing well, got a nice dose of ferts this week based on her light coloration(front middle) Berry white growing slowly still, tent is more suited for sativa dominant strains but this one gives the tent a bit more variety. (Middle back of tent) Purple trainwreck 2 growing like a beast this go round, she’s taking up half the tent almost by herself and filling in a 1.5x2 foot area in nicely. (Far right of tent) Purple trainwreck 1 bulking up extremely well, buds are nice and sticky, density is great so far on these buds. Hoping for another 14-20 days. Started her flush after giving her one more dose of nutes last week. Spotted first ambers on the trichomes... she’s only on day 45 of flower but the trichomes are already beginning to turn amber. I still suspect this strain to be semi-auto(has rudelaris genetics somewhere) and additional growing of this plant has simply increased this theory. The plant did have pistils when put into flower(18/6 lighting) but was a clone of a previous plant. She did reveg in 18/6 lighting and was cut from a flowering plant. I believe she had already transitioned into flowering since the plant had started opening pistils up again before being placed in 12/12. I believe she was a week or two into flower at the start of 12/12.

08/20: 3ème semaine de veg. Le "main-lining" prend forme sur LF@1. +/-170ml/engraisser chaqu'une *pour un départ difficile je trouve trouve que les choses ont finie par prendre une belle direction. Maintenant ont vas attendre la floraison de cette toute nouvelle "strain" qui serait donc d'un goût proche du Fanta et d'un effet plus anxiolitique vus l'effet du cbd sur le thc. Parfait pour commencer la journée en douceur. Maintenant on vas voir le rendement: le substrat contient 50% de coco ce qui devrait augmenter la masse des racines et donc affecter le taille des plants et le rendement in fine. #24 08/22: +/- 240ml chaqu'une #26 08/24: premier arrosage avec drain. +/-400ml, le substrat était très sec pour assurer un bon dévellopement racinaire durant la veg. #28 08/25: j'ai encore une fois torturer LF#0 j'espère qu'elle se remettra vite, LF@1 quand à elle sont "main-lining" prend la forme désirer, dernier ajustement fait ce matin d'ici deux jours tout devrait être placés comme je le souhaite. #29 06/26:+/-600ml/engraisser chaqu'une. Déjà au stade de pré-flo on se rend compte de les boutons de fleur sont déjà plus gros et contiennent plus de pistils sur le "main-lining" que sur celle qui simplement LST #30

The Grape Candy smell on this plant is insane! the amount of resin production is also very good. VPD around 1.4–1.6 The light hits the plants with around 900 PPFD.

Plantitas sanas. Hoy cumplen 21 días de flora Día 22 comienzo con los fertilizantes de engorde.

Only feeding water now before harvest next week. I'm so pleased with these plants and can't wait to try them. 😁 Big respect to @FastBuds for the insane genetics. I've never grown buds that dense before!

Week 5 there was a lot of sun I watered it completely every 3-4 days

D43. The first day in the third week of flower, everything is great in the tent. She looks terrific and smell fantastic. There seems to be something with CBD plants that makes them smell outstanding. ------------------------------ D45. There's nothing to report, really. She is quietly doing her thing, and there isn't much for me to do at this point. The mushroom kit seems to have just died after harvest, and today, I noticed some mold and removed it immediately. It was a fun experiment that didn't work out as I'd hoped. Oh, well :) ------------------------------ D47. Zzzzzzzz... flower is so dull as there's nothing to do but wait. ------------------------------ D49. There's not much to report at the end of the second week of flower. Yesterday, the entire tent was without power, so there was no light or exhaust for five hours. Ugh! Fortunately, I was making some compost tea and discovered the lack of power when watering. I gave the girl 2.5 liters of compost tea and humic acid @ pH 6.6. ------------------------------

GSC BY KANNABIA Week #21 Week #10 Flower This is the last week for feeding the plant trichomes are about 50% clear 50% milky so it's about that time. This plant is a beautiful lady!! Stay Growing!! Thank you for taking a look!!