Recommended
Likes
17
Share
Can’t believe I got 78g of bud of her! That’s nearly double what I usually get of 1 plant 😂 maybe it was due to giving her 7 weeks of veg, rather than the usual 4 weeks!? Either way I’m buzzing She’s coated in sugar and stinks!! The high is strong giving a massive couchlock and the munchies! She smelt and tasted like usual cheese but obviously much nicer and stronger 😌
Likes
15
Share
Likes
19
Share
@Changman
Follow
These ladies are starting to show their true colors and smells...exciting times ahead
Likes
18
Share
Despite slight damage by overzealous gardener with a weed wacker, causing shot through holes and torn leaves, the plants are doing OK. Supplemented feed on two different days with 7.5 ml/gallon Cytokin and 30 ml/gallon molasses. Had to remove visible eggs of unknown insect on several leaves (I hope it's not a beneficial). Increased but not overwhelming leaf miner damage. I need to start measuring these for height and width. The growth seems to have slowed but I am also on leave and observing the plants more so I don't know if it as situation where a watched pot never boils.
Likes
38
Share
Well we are at the end of week 2 and this gorilla cookies is doing well. I topped her on day 10 and it didn't slow her down at all. I attempted to start a little training on day 13 and that didn't go as planned. One of the mains snapped clean off as soon as I put pressure on it. Oops! She wasn't ready... Oh well, we are still early enough in the game that she should be able to overcome my brutality 👹. Other than that she is growing well and looking pretty happy. I'm hoping to get them moved into a better room in the next week or so when I can free up some space. Still giving them 24 hour light and 24 hour irrigation.
Likes
6
Share
Gettin a lot of rain this week struggling w humidity when lights go out. Everything is still chugging along buds starting to swell a bit more feel nice and dense.
Likes
10
Share
Forming a nice cross shape. Filling out nicely Don't forget to pH up if you decide to try the maxigro. I use it every other watering, watering slowly until 10-15% runoff Day 33 super cropping like a boss.
Likes
2
Share
Everything is not as accurate as I would like to say, but I wanted you guys to see what I can do
Likes
22
Share
@Mastr
Follow
Beautiful lady's are right in track I been flush them yesterday ppm was to high over 2k so next feeding will be plain water after that again I feed her until harvest
Processing
Likes
12
Share
@Cannabot
Follow
Did some defoilation, buds are swelling and smelling A.Full sunlight 8am-5pm plus 3 hours 600w hps.Halved base nutes and doubled bloom more or less.
Likes
13
Share
Just added Mephisto 3 sour crinkles and 2 double grapes to the equation. It was meant to be 4 sour crinkles but one seed still ent popped so I’m hoping it will! On to the grow where I haven’t trained any plants it’s a fight for space but I’m happy with most of the plants few fast buds wedding still ent properly flowered yet week 7 on but am happy with a couple glues and the 3 runtz the runtz is frosty! The grape Walkers are starting to swell and fill out big time I am happy so far with it all had a couple burns and defincys through the 7 weeks so far but got over them! The grape walkers are the big budded plants then the frosty ones at the back are runtz then the rest are glues! Started defoliating plants
Likes
1
Share
@Saylles
Follow
Heute mal inklusive einem kleinen Video. Was soll ich sagen, ich habe in diversen Foren und auch hier das Problem geschildert und musste wohl feststellen, dass ich es tatsächlich geschafft habe mit Bio Dünger zu überdüngen und das wahrscheinlich mit zu viel Stickstoff. Ich habe mir die Trichome angeschaut und rechne mit einer Ernte in ca. 14-20 Tagen. Diese Woche wird das letzte Mal Blütedünger gegeben. Der Wachstumsdünger ist komplett raus. Ab nächsten Sonntag wird je nach Zustand entschieden, ob TopMax und die anderen Zusätze noch 1 Woche gegeben werden oder ob ich spüle. Ich werde die Töpfe auch nicht mehr voll saugen, da die Luftfeuchtigkeit kritisch wird (nachts 82%, tagsüber 65-70). Schimmel konnte ich noch nicht feststellen und auch vom Geruch her glaube ich, dass noch kein Schimmel vorhanden ist.
Likes
18
Share
@Mastr
Follow
She is twice bigger than my last grow everyday I look at her and see much different and I try to take pic everyday She loves nutrient and so easy to grow I feed her 1ml silica 2 biobizz bio grow .5 calmag 1ml bloom Just don't know why she is not streching let see what happens next week Updat she start streching I'm so happy 😊
Likes
55
Share
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Processing
Likes
16
Share
@Dunk_Junk
Follow
So I'm having another go at LSD-25. Day 1 she looked quite sickly if I'm honest. She's picked up ever since. I've put the timelapse camera on her for the forthcoming week so I can keep a very close eye on her growth.
Likes
20
Share
no signs of pests during the grow. only one time i had ants trying to infest one plant but easily got rid of them by using cinnamon around the stem. she grows easy and is fun to train, you don't have to be an expert. in the late flowering i got some budrot in both plants and stalled the harvest by inspecting and cutting it away daily, haven't lost a lot due to it. i would recommend this strain as she is a high trichome producer, big yielder and easy to grow plant that gives nice buds with a good smell and greath high. she is a strain that makes you talkative, giggly and euphoric and is surely gonna give you a good sleep. be sure to go easy on her as she is a strong breed. an amazing strain to grow. she creates colourfull purple buds filled with trichomes that is really good for the chilling occasions, be sure not to have to go somewhere as she will last long and prepare for a joyfull evening with lots of laughing and good talks. i'll post more pictures after the drying process!
Likes
27
Share
This week went really great! Plants are looking super healthy today at day 22 from seed!! Today they got a dose of just pure water phd at 6.5 ! Temperature an humidity has been staying pretty stable everyday, staying around 70-75 degrees and 58-61 % humidity!! Can’t wait to see what these girls do this week ! Hope you all enjoy , an had a great safe weekend! Peace love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨If there’s any questions, please ask me 🙏🏻
Likes
36
Share
@Mazgoth
Follow
Very good autoflower strain,this strain is the safe option if you don’t know how to grow.