26.12.24: I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. I am pleased with the progress, considering all of my mistakes! 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. Thanks for checking out my diary 🍃 ✌️

Super frosty ☃️

Estrés hídrico + foliar de nitrato potásico espectro - 400 nm-800nm

Die vierte Woche der Blüte hat begonnen. Der Platz im Zelt ist mehr als ausgeschöpft und die Pflanzen küssen fast die Lampe. Ich denke der Stretch ist vorbei, ich hoffe es zumindest. 🙏🏻 Diese Woche startet mit etwas Bio PK 5-8 von Biotabs. Die Blüten und die anliegenden Blätter fangen an zu glitzern. 💎 Ich habe dem Wassertank meines Autopot Systems einen Luftstein hinzugefügt. Wird das einen großen Effekt bringen? - keine Ahnung. Kann es schaden? - ich denke nicht.

Day 50 since seed touched soil. From now on all is in stable position. AK will always be in right corner from now. Biggest, fattest girl in all garden, takes a bit effort to bend even few top, stacked and fat ;) 5 liters went in, want good run off and saturation. Later today will install second level of scrog. Reposition all shoots, some are lost, i almost regret instaling scrog, lost control of even height a bit, but canopy is very dense, branches went fatter during that week, i am happy . Mars TSL2000 is on 80% will increase to 90% at the end of this week. Day 53. Second level of scrog almost eaten, will have to make third, plus heavy clearing awaits next week ... Day 54. Think tomorrow is watering day. Girls need good clearing, bottom canopy been canibalised heavily, lack off air shows a lot. Will do third level of scrog together with watering. Happy Growing !!!

Growing how it is and its good.

Added a scrog today, plants looking healthy. Ill be looking foward to see how they react being autoflowers. Bat guano also added to the coco as a top layer and mixed in about an inch. Upped the cannaboost and cannazym. Next week probably be adding PK 13/14

Topped this girl this week, she’s growing pretty good. Very nice looking plant to my eye.

Well after different bits of advice last week I decided to take fast buds advice and keep feeding, she's on day 70 now all her leaves are fading, I'm guessing this is just because she is coming to the end of her cycle,.. still not sure when to start flushing as fast reckoned there was 3-4 weeks left that was 7 days ago so now still 2-3,.. I reckon 1 more week of food but just what I've put on the nutrient list nomore and then start a flush, just to say I appreciate all and any advice given to me I just followed fastbuds advice as I thought probably safest option. Thanks everyone. Roll on next week 👌

Start of week 8. Looks good. No big issues to report so that's good. Dropping feed to 350ppm. Using dry koolbloom for ripening and I plan to start flushing mid week. The gelato is having a hard time standing up. I've tied up branches everywhere. I took clones from plants that were in 3 weeks of flower for those 2 plants. (Monstercropping). It does work where there are way more stems and budsites. The downside is most stems are weak and cannot support alot of weight. It was a good experiment though. Thanks to the community for all the likes and support. Looking to harvest most plants in the next 2 weeks. Tricomes are filling up and beginning to turn cloudy on at least half the plants. Good day all, and happy growing!!!

🌱 Start: 17.07. 🌱 Hello everyone! This is my very first grow and I'm thrilled to share every step with you! 🎉 I'd appreciate any tips you might have to help me achieve the best results! 😊 Equipment: I've geared up with an Indoor Grow Kit from MarsHydro along with some BioBizz supplements to ensure my plants get the best care. 🌿 🌼 Seeds: I opted for Fast Buds seeds after hearing great things about them. They were delivered super fast—just two days! I’m particularly excited to test the Grapefruit strain. 🚀 I've begun soaking the seeds and setting up my space. Eagerly awaiting the transition to the next stage in a day or two! 🌱 📅 Update: 19.07. My Grapefruit seeds sprouted 1-2 cm within just 1.5 days! 🌱 It’s often recommended that autoflowers be planted directly into their final home, so I'm following that advice. I'm working on improving the air circulation in my tent to ensure the best environment for growth. 🌬️ I'm currently using 0.2L cups with big holes over the sprouts to maintain higher humidity during their initial two weeks. 💧 🎉 UPDATE 22.07. - THEY ARE ALIVE 🎉 My Grapefruit sprouted on 20.07., and I'm overjoyed to soon share photos and a video of my little green buddy! 📸🎥 PS: My plant enjoys 2 hours of chill jazz music every day! HAHA 🎷🎶

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

✊

Week 3 begins for LSD and Green Crack. Both ladies are looking good, but had some small signs of deficiency. Added big bud coco and upped feeding another liter (split feed day 1 & day 5 of each week), hopefully this will help resolve the deficiencies. Thanks for stopping by growfessors 👽🌳💚

Bloom21

Windy rainy week. Another week or 2 and I think these girls will be coming down. They have had some rough weather and I don't think they will take much more rain. Buds are nice and hard so it won't be to much of a loss.

Fed only one time this week. 3 waterings only one with nuts. Cal mag on the others.

Done some defoliation! Treating a pest attack!! Using Neem Oil & Puryolt

9/11/24 need to transplant soon. need to figure out space for 9/16 transplanted into 3 gallon pots. added myco to the roots and