Everything running smoothly, buds getting bigger and trichomes production increasing. DAY 126 -Molasses PH - 5.84 PPM-914 Solution Temp - 22.4 Watering Volume - 4.1L DAY 129 - Nutes PH - 5.83 PPM- 2620 Solution Temp - 24 Watering Volume - 4L

Hola chicos subo alegremente mi seguimiento

Strain: Auto Fractal by Divine Seeds Day 30 from seed She’s 30 days old and looking great! 💚 The leaves are a healthy, vibrant green, and the structure remains compact with a height of around 10 cm. She’s loving the conditions — daytime temperatures are steady at 30°C, and nights drop to a comfortable 20°C. No signs of stress; she’s growing strong and steady. We really like how this girl is developing — beautiful genetics and great early performance! 🙌 Big thanks to Divine Seeds for providing the seeds. 🌱✨

The plant was harvested on day 67 of flower and is now hanging up to dry. I've got the drying environment set at around 58-60% humidity with a temperature range of 15-19°C. Hoping for a nice slow dry to preserve those terps! 👃💨 Will update once it's ready for the next step. Stay tuned! 🚀

Day 44: Watered the plants 0.5L with nuts 733 ppm, 1468 us/cm, PH 6.4 I am doing lst every other day Did some defoliation Day 46: Watered the plants 0.5L with nuts 684 ppm, 1444 us/cm, PH 6.4 Did some defoliation Used neem oil to prevent pests

Week 8 Update – Height Issues and Frosty Buds 🌿❄️ No major complaints this week—everything is under control, except for the height of AN#3… but Supercropping to the rescue! 😅 BioBizz#1 – BT30 She’s now using less water, managing 3L every 3 days. Bud development is steady, but compared to AN#4, she’s noticeably less frosty. AN#4 – BT30 This is officially my best and strongest plant so far—super frosty, even on the large fan leaves! 😍 She’s also down to 3.5L every 3 days and thriving. AN#3 – BT26 Not performing as well as the others, mainly due to the light distance. At times, there’s only 4cm clearance from the lamp! She’s definitely not loving it, but I’ve managed to keep things under control with Supercropping. I have to admit, the stretch on this strain caught me off guard, and I’m not entirely happy about it. 😅

10 September Harvest - see pictures. While some growers leave the plant whole when they cut, I do not. It is a personal preference and situational convenience if your a home grower. I chose to cut large, long branches, and remove any whole water leaves, as long as it doesn’t interfere with the bud formation. I don’t trim yet. This is done for a few of reasons: 1) It’s my last good close-up look at her until another 5 days or more, 2) I don’t want wet leaves drying on my buds if I can help it, and 3) I occasionally like being able to shine a small LED flashlight on the flowers while its drying. Mold is our greatest problem as growers, it can destroy a beautiful grow right up until the end process. Then I hang it in a dark closet, provide circulation and ventilation. Light and heat, anything above 80 degrees F, will start a break down in cannabinoids during the dry, it is ideal to stay away from both. I’m fortunate that a humidity level of 50- 55% and temperature of 65-70 degrees F is fairly consistent and easy to maintain. Anything below 60 degree F will prevent the adequate drying out of chlorophyll. Almost all my flower routinely take 5-7 days, some a little longer, to properly dry out. 15 September Trim - see pictures. First you’ll notice the buds have shrunk up to half their original size. This is just a fact that we growers have to deal with. Due to evaporation without uptake of water, it takes about 3 days for the chlorophyll to dry up, then slowly go through a chemical change. Along with the leaves, cannabinoids also begin a chemical change after 3 days called decarboxylation. A slow process where the THC level increases while curing. You want the leaf to be dry so they can be hand trimmed easily, but you do not want that bud so dry that it starts to fall apart in your hand. Try to handle carefully by the main stem to avoid touching the bud all together. A lot of these cut leaves will be covered with trichomes, good for making oils, or other products, it’s an option worth looking into keeping it. After trimming, I do separate a few premium flowers for my first smoq. Then loosely fill wide mouth quart mason jars with about 1 oz/28 gr of product per jar. I seal the lids for a few hours to determine what relative humidity they are at, see hygrometer pic, before making a decision to put in a 62% humidity control pack of my choice or to wait, then place in secure in a cool dark place with stable humidity and temperature. It is very important to then observe/burp or exchange the air as needed, up to several times a day, until 62% rh is achieved. Once your close to to your mark, put in your desired RH level control terpene shield. If you have a problem getting there: 1) it has dried out too much, no real solution, try to put several large cut stems left over from harvest into the jars with the buds to try and increase humidty, 2) it has not dried out enough, in this case no problem, just remove and dry out a little more. This is also a personal choice, some people like it drier in the 50% plus range. Whatever you do, research and preserve. At that time burping is no longer required. Cannabis will reach its peak potency potential at about 40 or so days into the cure. The finished product should be a perfect grind when cured correctly without clogging up your grinder, this could take a month. Now that I’ve said that, I’m sure someone has grown something that they have not been able to grind. It can remain in this state for an easy 6 months with little change, locking in all the terpenes and potencies. All you need to do is occasionally check the product to ensure there are no molds. If your grow/harvest/cure techniques are good this should not be an issue. It would not be uncommon to find many cannabis strains will last, with small degradable change, for up to one year after being stored this way. Using an airtight glass container, controlled relative humidity, maintained low temperature, and kept in darkness will equal maximum shelf life. Always avoid direct sunlight and temperatures above 80 degrees F. The reasons I’ve ultimately chosen Deep Water Culture as a grow medium. Each has their own pros and cons indeed. I found the most efficient, less maintenance and ideal solution for my situation was DWC. Burdens to overcome depend on size up set-up; initial equipment cost, size of containers, ph monitors, air pumps, type of water to use-reverse osmosis, RO cost/set-up/maintenance, ways to transfer/change water and nutrients, what nutrients to use and schedules, takes several grows to learn and understand, a 1 year learning curv, easy to nutrient burn. The Benefits of growing in water; no dirt, no bugs, no diseases, rare nutrient deficiencies/toxicities, steady and rapid growth that enables the plant to reach its genetic potential. After harvest, there is about a 1 hour equipment cleanup, sterilization and turn around process before replanting. Cannabis will perform in so many different ways and mediums, no one way is the best and the best way is the one you are using, right. Chose what works for you in the long run. There will always be an initial cost in set-up. My advice if one were in need to cut corners, I would not recommend cheap lights. This single factor is the most critical, afford for the best. The notion that organic and water has a different taste, flavor and potency effect is absolutely debatable. The more we learn the better we grow and experience is always the best teacher. This is what works for me and my methods of growing in general from beginning to end. A BIG “Thank You” to everyone who stopped by to take a look. My next diary will start at the beginning of October 2023 with a Forbidden Runtz Auto. There will be minor differences during the grow. I enjoy Auto strains simply by what can be achieved in a short time. No matter the strain they will unveil one thing in common, the demand for attention. Many times over it is the anecdotal gardener that surmount plant scientist. Last should I mention, do not forget to stop and enjoy the fruits of your labour...

Day 76 - I was on holiday all this week so not many daily photos, was able to gather the Energy the day after I come home to give them there proper defoliation at the end of week 3. No complaints or problems as of yet with the strain very easy to grow with little maintenance

Super Sorte die ich bekommen habe von @skunkydog420 danke nochmal und es sind jetzt 30g trocken aus der Amnesia Haze Auto raus gekommen ich bin zufrieden und sie schmeckt sehr lecker

Spray evolution one's a week;)))))

Vamos familia ya traigo la novena semana de floración de estas Lava Cake de Zamnesia. Vaya color, están bastante sanas , van produciendo tricomas y van formándose y madurando las flores correctamente. Ya estamos en la recta final , se están poniendo a punto de caramelo. Temperaturas máximas en 28.5 y mínimas en 26 y una humedad estable en torno al 40%. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Espero que lo disfrutéis, buenos humos 💨💨.

She coming along nicely and really likes the new light

Well I'll say I didn't put as much time into it as I should have but it was quite or a pretty fair grow considering it's my first time growing anything.I've learnt alot and looking forward to my second grow

Planta fácil de cultivar, de estatura media y producción importante de tricomas. Sus fragancias son dulces parecidas a la panela, canela, especias y un fondo un poco kush con notas a crema. Flores hermosas macizos, compactas y totalmente cubiertas de fragante resina, las tonalidades son hermosas, al moler se despliegan todos los aromas y ese tono violeta en el interior de las flores. Gracias a fastbuds una vez más por su confianza y a toda la gente que sigue el contenido. Buenos humos!

10/06 - Starting week Feeding: -BioProtect -Bloom Complex (2.5ml/L) -SuperVit . -pH 6.35 EC 601 I added a temperature and humidity sensor to the Pi, and a moisture sensor that warns if the value does not exceed a certain threshold. The plant is rising too much, soon I will be forced to take action. My grow is only 1.60m high. As from the last photo of 10/06, I folded the stem of the plant to allow it to stay inside the grow box. 13/06 Feeding: -Bloom Complex (7.5ml/1.5L) -pH 6.18 EC 1085 14/06 The plant has become too high, I have to bend it again and drastically this time. I decided to apply the supercropping technique. 15/06 The plant seems to have reacted well to supercropping, and is giving off purple hues on the flowers. 17/06 - End week Feeding: -Bloom Complex (7.5ml/1.5L) -pH 6.8 EC 1500

Starting to find there feet/roots now

Just watering plain water, im thinking this is the last week before harvest, im checking out the trichomes every other day to look when theyre ready. Everyday theres about 5-10 leaves which are so curled up and dried that i can just rip them loose super easily.