Les dernières semaines s'annonce bien.

They are getting fatter each day, as you can probably notice one of them is showing real signs of stress with brown spots and dead yellow leafs. I am adding Calmag this week and making sure Ph is set, will most likely only water them and add calmag. I think next week will be the flush and then harvest. Still trying to battle humidity, hopefully I get a dehumidifier this weekend and manage to reduce it a bit. Hopefully no mold -_-

Over night soak with paper towel will update once we got action

Got some Nute burn my fault, caught it to late thought it was something else but do beleieve it was Nute burn. The high ppfd didn’t help either. They all bolted and are now flowering beautifully.

When it should start flowering?

She’s starting to fall all over because the bud is so heavy n dense

LJ4Q23 Bolt II SOP LJ4Q23 - 8-Plant SOG from Cuts Objective: - 8 Plants - Single Colas - No Branches - Harvest Lemon Jeffery (Narrow Leaf Phenos): 70±5 days - Light Intensity - Ramp up from 200 - > 40 DLI, at 13 hour ScotoPeriod, will need MAX Light to Achieve - Ramp Light Intensity to MAX ASAP (3 Weeks?) Notes: - Lemon Jeffery handles HIGH LIGHT Well, even within 6” of Light @ ~1800 µMol/m2/ - The challenge will be achieving minimum 40 Mol/day, which in this setup requires 1000 µMol/m2/s @ 13 hour Scotoperiod ______________________________________ Start of Week: [ 2023-12-06, LJ4Q 8:B:1:1] End of Week: [ 2023-12-12, LJ4Q 14:B:1:7] Flower Week 2 _______________________________ Environment Targets (Bolt II): - Scotoperiod: [ 13, h] # Contiguous dark hours daily - DayPeriod: [ 1900, 0600 +24h] - TemperatureMax: [ 82, °F] - RH: [ 70, %] - VPD: [ 0.91, mS] - LightIntensity: [ 850, µMol/m2/s] - LightDistance: [ 16.5, “] Bolt II Fertigation - RLA Medium Chart, Week 2, EC: [ 1.7, mS] - Primer A: [ 6.2, ml, gal] - Primer B: [ 6.2, ml, gal] - CalMag Fuel: [ 2.5, ml, gal] - Silica Skin: [ 2.5, ml, gal] - Lush Green: [ 2.5, ml, gal] - Root Anchor: [ 2.5, ml, gal] - Peak Bloom: [ 2.5, ml, gal] Bolt II Fertigation - RLA HYDRO Chart, Week 4, EC: [ 1.7, mS] - Primer A: [ 8.5, ml, gal] - Primer B: [ 8.5, ml, gal] - Silica Skin: [ 4.25, ml, gal] All Fertigation Add - Plant Success: - Microbelife Photosynthesis Plus: [ 0.5, ml/gal] - Build-a-Soil: - Quillaja20 Powder: [ 0.5, tsp/gal] - South Cascade Organics: - SLF-100 _______________________________________________ Wed Dec 6, 2023 LJ4Q 8:B:1:1 __ Thu Dec 7, 2023 LJ4Q 9:B:1:2 FOLIAR Application: Bolt - CalMag Fuel: [ 20, ml/gal] - Lush Green: [ 5, ml/gal] Install Drain Tray - [x] Install Irrigation Manifold - [ ] Install Drain pump Irrigation Install (When Drip Rings Obtained) - [x] Connect manifold lines to each of 8 drip lines - [ ] Calibrate Drip Ring delivery __ Fri Dec 8, 2023 LJ4Q 10:B:1:3 - We had 500 ml Runoff from 360 X 8: 2880 total: 17% Runoff, which is a good number. - Therefore - if we want to duplicate Initial watering: - Let’s start at nominal 110 ml/ event - 4x a day. 1.8 ml/sec, 110 ml: 61 Seconds, + 5 Sec -> Make it an EVEN MINUTE of irrigation. - [x] Bring Reservoir Operational - [x] Power Chiller - [x] Install irrigation pump - [x] Install circulation pump Irrigation Approach - We’ll use 1.7 ml/sec/line as the Baseline feed. - If we water no more than the Saturation Volume daily . . . - 440 ml/day, Max/Plant Estimates - AirPot Size: [ 4400, ml] - AirPot Saturation: [ 440, ml] - @ 3.2 ml/sec: [ 137, sec] # Max Per Day - Assume 10 Sec ‘Fill’ overhead Per Irrigation HF Fertigation - 4 Events/day - 11 hour Irrigation 4x/day Frequency: 2.75 hrs - First Irrigation 15 Minutes BEFORE Lights On - @ 1.7 ml/sec, 60 sec/event, 100 ml/plant, 4 times a day - 60 Seconds/event, 4X/day EC 3.2 1.7 6.0 ml ml ml Primer A 16.00 8.50 EC 3.2 1.7 6.0 gal total Primer B 16.00 8.50 Primer A 16.00 8.50 51.00 Silica Skin 8.00 4.25 Primer B 16.00 8.50 51.00 Quillaja20 0.5 tsp/gal Silica Skin 8.00 4.25 25.50 King Crab 0.5 ml/gal 0.5 - Loaded ~ 6 Gallons, added another 1 to 1-1/2 to EC: 1.7 Program Irrigation Timer ( Start 15 minutes before Lights On - Time based on ~3ml/sec per line ADJUST When we have ACTUALS). Delivery Max per Plant/day: [ 440, ml] Delivery Frequency/Day: 4 Delivery Period: 2h, 45min Delivery/Plant: [ 102, ml] DeliveryDuration: 60s Usage Expectations - 800 ml/day W 6 Gallons in the res, we’ve enough feed for 28 Days - probably need to mix less. ;-} Fertigation Schedule Initiate Irrigation Irrigation Complete Event 0 18:45:00 18:46:00 Event 1 21:30:00 21:31:00 Event 2 00:15:00 00:16:00 Event 3 03:00:00 03:01:00  Foliar - [x] Resin Bloom: [ 20, ml, gal], [ 1.25, ml, 240, ml] - [x] CalMag Fuel: [ 20, ml, gal], [ 1.25, ml, 240, ml] - [x] Connect manifold feed line to Little Giant Irrigation Pump FOLIAR Application: Bolt - Solar Rain: [ 20, ml/gal] Per Line Delivery, 2 Data Points: 1.87 ± 0.125 ml/sec Let’s go with 1.8 and see . . . Following the rules of Halves - the Pre-Drip ring flow rate was 3.2 per line. With the rings - it’s about HALF, maybe a little more. SO - Ferti9gat __ Sat Dec 9, 2023 LJ4Q 11:B:1:4 GROWER ERROR - Left Irrigation pump connected to POWER instead of TIMER and drained 6 Gal of feed across 8 plants. - I think they’re sufficiently watered . . . ;-} - Gorilla Grow Tent HELD all the water until I could shop vac it out this morning during the grows scotoperiod. - Will report on results after lights on @1900 Lessons Learned (SOP) - ALWAYS ENABLE DRAIN PUMPS BEFORE INITIATING AUTOMATED IRRIGATION - Some might call this common sense, not an SOP… _______________ Saturday Tasks - [x] Refill Res, RLA Hydro Chart @ EC: 1.7 mS, 3 Gal (11.4 Litres) - [x] Primer A: [ 25.5, ml] - [x] Primer B: [ 25.5, ml] - [x] Silica Skin: [ 12.8, ml] - [x] Quillaja20 Powder: [ 1.5, tsp] - [x] SLF-100: [ 15, ml] - [x] Photosynthesis Plus: [ 18, ml]  - [x] Tidy Grow Room Install Irrigation Drain system - [x] Obtain 10’ of 1/4” - 3/8” red tubing for runoff drain - [x] Install sump and catch bucket - [x] Externalize power cord - power up - verify operation - [x] Externalize waste hose output in 2-1/2 Gal Dark plastic reservoir _______________ __ Sun Dec 10, 2023 LJ4Q 12:B:1:5 LightIntensity: [ TBD, µMol/m2/s] DLI13: [ TBD, Mol/m2/d] Need to get to 40 DLI baseline, which at 11 hours of light is 1037 µMol/m2/s @ 11 hours/day __ Mon Dec 11, 2023 LJ4Q 13:B:1:6   Lighting Plan - Increase PPFD 10% until we’ve achieved [ 1000+, µMol/m2/s] - Increasing light intensity will increase nutrient needs and runoff. - STAY ON POINT. FOLIAR Application: Bolt - Solar Rain: [ 20, ml/gal] - Silica Skin: [ 20, ml/gal] Still looking for vigor. The girls still look like they’re enjoying a slumber party. ;-| Evaluate Runoff - After doubling irrigation time ( 1 min -> 2 min), we should have some runoff to evaluate. - IFF NOT: Double Irrigation Time to 4 min - ELSE: evaluate - estimate 10%/min, ~320 ml LightIntensity: [ 850, µMol/m2/s] # The sooner we get to full light, the better. ;-} - 440 ml/day - 44 ml, runoff/day - [x] Actual: [ 500 , ml] We also had an extra 5 or so minutes of feed verifying pump yesterday. Will measure again Tuesday. height range: [ 10, 6, 9.5 avg] - [x] Increased Irrigation Interval to 3 minutes. __ Tue Dec 12, 2023 LJ4Q 14:B:1:7 Irrigation Interval: [ 3, min] Irrigation Delivery per Event: [ 100, ml] Events per Day: 4 Total per day per plant: [ 400, ml] Total per day delivered: [ 3200, ml] # < 1 Gal - We target 10-15% runoff, so we’re looking for 380 - 440 ml runoff per day. - IFF we have MORE than 380 - 440 ml’s - [x] Reduce Irrigation Time to 2:30 (from 3:00) - IFF we have LESS than 380 ml runoff - [ ] Increase Irrigation Time time to 3:30, Re-evaluaute WEDNESDAY - [x] Measure Runoff - [x] Amt: 600, ml - Total Run was 14 minutes. We’re using 100ml/min as the guideline, but believe it’s closer to 30-50 ml/min. ***TUESDAY NIGHT - LAST PICTURE FOR WEEK (Hopefully DRY and Praying)!*** Changed Irrigation from 3 min to 2:30.

So far, everything is developing well. The Bruce Banner has been lollipopped, perhaps a little too much, but let's wait and see. I trained the S.A.D. #4 with plant clips, as three shoots became too dominant. This worked very well so far and the other shoots caught up well. I also noticed that the Bruce Banner was getting slightly yellow leaves. I don't know the exact reason, but it may have been due to the low CalMag dosage in the previous weeks. I also noticed an infestation of fungus gnats, nothing serious, but today I watered with nematodes and this problem should have disappeared.

welp i pushed them 1 more week and now they are receiving the flower nutrients, i gave these ladies a heavy defoliation last week and as you can tell now it does not even look like a took a leaf off.. will possibly give 1 more like defoliation and then let them all put on the weight, lets see what these ladies are made of 😆

Bruce Banner #3 Fast idms doing really well. She just grew into the nutrition that was a little strong. She had her roots pruned today. Everything is looking good under the Solux 350 from Hortibloom. Thank you Hortibloom, and The Original Sensible Seeds company. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Pure Ice cream is finishing up. I switched her to just ph water yesterday. The next update will be a harvest for her. She has a nice cream smell, and Looks really good. She should produce some nice nuggets. Thank you Pure Instinto Seeds, Athena, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com CA: https://spiderfarmer.ca UK: https://spiderfarmer.co.uk EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au G5000 Light Amazon Link: amzn.to/4643esa UVR 40: https://www.amazon.com/dp/B0BR7SGTHS Discount code: saveurcash (Stackable)

Bud rot spread so plant had to come Down

End of week 2 flower for both Power Plant xl Main plant 47 cm and one in shared pot 63 cm All plants looking super healthy

10/26/2020 6 Days into week 4, all looking great, update a little early but going out of town. Calyx are getting bigger, pistils popping up everywhere drinking about 6 liters a week. 10/29/2020 3 days into week #5 day 3 she took 4 liters today she is drinking plenty of water! next week will topdress with 4-9-3

So WHY is this auto taking so damn long to mature??? Is this normal? It's my first hydro grow, but my wife's soil grow started after mine (more than a week) + was grown in the exact same room .... but has been harvested over the past TWO weeks. Thoughts? Not much needed doing this week. Did a huge trim mid week that was posted to a mid week update in last week's diary entry. She didn't like it at first but then bounced back pretty well. I think I have a very slight touch of nutrient burn on some of the tips, but it could also be a touch dry as we're having a hard time keeping the room over 40% humidity as the outdoor temps here are stupid cold recently. Hoping to harvest in 2 weeks or so.. but could be longer. Urgh. She's a big, bountiful, heat-loving lady that's finally a under a bit of vegetative control... but apparently REALLY likes to take things slow.

This wee was all vegative two phase. On day 7 this week the two shorter plants were transitioning to generative one phase. These girls are so fast the phases come and go quickly. This Last week was raining or cloudy everyday. I had to switch to dry nutes because the soil is staying wet. Feeding liquid nutrient mix/teas isn't an option. I've found a few specs of PM on the one plant I didn't top. I treated with Arbor bio fungicide and it's clearing up. The other two are showing immunity so far and are receiving no treatment.The nutes are listed as ml/gallon of soil topdressed. After day 2 inspection I believe I ran the nutes a little hot. They should grow into them. Adding a second topdress of 800ml of coop poop 2-4-3 on day 6 this week. We got a big rain day 7 early morning. It washed that coop poop topdress in and really gave the plants a good green color.The one that didn't get topped is pushing 64" the others are about 57" so I used an average. I recommend topping but to keep that one from falling any further behind I let it grow without topping. The one that wasn't topped is being treated for powdery mildew with Arbor bio fungicide. It's helping the other two are still showing immunity and are further along in flower.

Okay growmies here we are at the end of our cream cookies by fast buds. It was such a pleasure to grow, i learned so so so much this run that will help me through the rest of my adventures. The beginning was tough as i am new i over watered and did not ph the water and what i mistake. But its okay i learned. She bounced back like nothing and produced these awesome buds and beautiful smoke for me. Watching her change colour and grow was amazing. It was topped and lst, she reacted amazing to it and grew more and more. Fast buds has not let me down. I cant wait to grow her again and see what happens next time! I washed the trim and made bubble hash with it! Pressed some of the flower to make some rosen!!!

So, eventful week. Prior to putting my seeds into my system, my light and rdwc system was left on as I was dialling in the growing environment before placing the seeds as a final home. My only issue was I had a light leak BEFORE putting the foil top covers on the clay pebbles. Long story short, I got algae which ended up turning to root rot. I spotted it very swiftly and did a res change adding beneficial bacteria to the system along with the base products of remo nutrients. A few days later new growth and recovery is taking place. Day 16- Fully back on track, new roots shooting out into the water and the growth rate has picked up as it should. Foliar feeding twice a day for a little boost until the root system establishes a bit more. Huge changes in just a day. Can't wait to see what a week's growth looks like. Really loving the sunset/sunrise feature on the trolmaster, something I got to experience watching recently! Watching by closely to make sure everything stays in track. Stay tuned for the next one 😉

Performed another round of topping as the auto on the right is still doing its thing. Also did some more super cropping on the new growth. Canopy growth has made it through the screen.