Recommended
Likes
96
Share
@DevilsBud
Follow
New week of flowering for CBD SPLIFF BERRY Doing nicely @spliffseeds deliver again a great strain 👌🏻 did Les LST to this one compare to Afghani Gold but made sure the lower stuff gone also make sure less popcorn can pop up. I am not sure if ever smoke a 50/50 THC/CBD strain but will see 👀 Happy growings Growmies see you next week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
17
Share
@cultivars
Follow
AUGUST 24 to AUGUST 30, 2024 Sunrise 07:05, sunset 20:50 for total daylight of 13:45 hours. Specimen continues to push upwards, gaining approximately 13cm in height over the past week. Plant is taller than anticipated and planned for, which could present some difficulties as it's getting into the oscillating air circulation fan's wake. Was surprised to see the continued stretch, but there were two days of high heat that may have been the trigger, or, it may have been the result of defoliation and pruning, or it was simply the plant's final push, or a combination of all those factors. It appears to have crowned, or is close to being fully crowned, and as such I undertook a fairly heavy defoliation to improve airflow through the bottom of the plant, and strategically removed leaves in the upper canopy to improve light exposure. Fungus gnats did regain their hold, and so I decided to top dress with Bacillus Thuringiensis Israelensis (delivered via pulverized Mosquito Dunks) in an effort to kill larvae, treated with Soil Pest Defense (Neem Oil, Castile Soap and Yucca Extract) and replaced Bug Scan Yellow Sticky Traps at soil level. Effects were pretty immediate, but I will need to stay on top of this. Would like to cease use of Neem Oil in the soil, so considering acquiring some beneficial nematodes to combat the pest issue. Overall, specimen and its' "neighbours" in the greenhouse are doing well, and filling the room. When accounting for the bench and containers, tops of plants are over 152cm (5ft) from ground level. It is making management a little more challenging, and proving to be more difficult to find good angles to photograph (the space is pretty much filled up). The scent of citrus, skunk and spice emanating from the greenhouse is building, and at times quite strong. Still appears to me to be on-track for ripening the week of October 14, 2024. Day 120 - n/a Day 121 - Drip watered 5.0L of plain rainwater with pH of 6.7 Day 122 - n/a Day 123 - Defoliated specimens, focused on removing leaves from lower parts of the plant to improve airflow (lollipop), pruning hidden or non-producing branches, and strategically removing select upper fan leaves to improve light exposure and airflow. Day 124 - Top dressed with pulverized Mosquito Dunk (1/4 unit per specimen); 1.5L drip watered with plain rainwater in the morning; Hand watered 2.0L of Soil Pest Defense Drench in the afternoon; Hand watered 1.0L of plain rainwater about 30 minutes after soil drench; Replaced Bug Scan Yellow Sticky Traps (1 unit per specimen, cut in half and rested at soil surface on two sides; With defoliation from yesterday, room air flow seems adequate, after increasing speed of lower fans. Day 125 - n/a Day 126 - n/a Next week, planning to feed the rhizosphere with Compost Tea and continue efforts to control fungus gnat population.
Likes
27
Share
I harvested the 2 plants and I’ve got them drying in my 4x8 tent. The temp in my tent is staying between 60F and 64F and humidity is 58%-60% they’ve been drying for 10 days so I’m hoping to get another day or 2 before I start trimming. I’ll post an update once it’s all trimmed and weighed up
Likes
75
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 We got out times messed up somehow, our calendar puts the 24th of Sep as the 9th week of flower.. this makes sense, our Big Bud usually fades fast with a color show just before harvest week.. we couldn't understand why everything looked so mature lol.. The buds on this strain are rock hard, the FC-E6500 was a great investment, this plant did great under it (A++ MarsHydro!!) ..we're really excited to chop this plant down. My husband has a trim job on his hands lol.. we'll be giving her water only (and lots of it) from now until we dry her out completely for harvest.. This was a great grow and should produce enough flower to get us (partly) through the Winter.. thanks as always for dropping by, our next upload will be harvest and dried buds in approx 17days..Happy harvests everyone!! ⚡Mars Hydro/FC-E6500⚡ Specifications ⚙️: 650 watt, full spectrum design, removable (and adjustable) light bars and driver 🔌 Diodes: BridgeLux chips (3978 count!) Veg Coverage: 6x6 ft 🌱 Flowering Coverage: 5x5 ft 🌼 High-Efficiency PPFD: 1200umol/m²/s ☢️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
30
Share
@Drumen
Follow
Fast Eddy aka 1 bud plant no nutrients just a drop of mammoth P
Likes
6
Share
@Spazmagi
Follow
11/23 - Update 1 day early. Will make measurements and update accordingly tomorrow, as usual. I did a top off at 75% strength nutes. She is drinking 1.5 gallons per week (approximately). Trying to hold her ~850ppm @ 5.9pH. Her canopy is nice and open and bud-sites are stacking nicely. I'm hoping for some additional stretch over the next 7-10 days to give me an increased yield. Looking forward to seeing what pheno I ended up with. 11/24 - Updated stats. 850ppm, 9" above screen (so 15" total). Measured pH of 5.3, added 1ml GH pH UP to adjust; will check again later. Light adjusted for optimal canopy between both plants. I might end up re-orienting the lights in the other direction. The distance from the flowers varies between 12"-16" because some of them are stretching up more than others. I still think it only has a slight aroma, but she still has a ways to go. If she goes the full 13 weeks (~90 days), then harvest would be on 29 Dec (Happy Birthday!). Later on 11/24 - Uploaded videos of buds and roots. 11/28 - Went ahead and supercropped/HST the tallest stalk. Will see how she responds after lights come back on to see if I want to do the same to the other tall stems to even the canopy. Thanks for stopping by the garden, and, as always, Happy Growing!
Likes
27
Share
Shes about 6 inches from the light. Probably going to shorten the legs on the stand so the top buds dont get fried too bad. Already getting some yellowing from the light. Dutch buckets in a 5 ft tent ain't a great idea. Buds aren't stacking up very fat so far but building some trichomes. Just keeping the reservoir full and the water pumping.
Likes
97
Share
🌱 GERMINATION (4 days) Seed in a glass of EC 0.4 tap water for 24 hours, then in root riot and under the lamp. She sprouted 4 days from dry seed. 🌿 GROWING STAGE (12 weeks) I decided to grow this plant with a long vegetative period, this allowed me to do a lot of training and try something more than the usual defoliation and LST. Starting from the 5th veg week I started my training, I FIMmed the main and carried out a defoliation sessions once/weeks for three weeks. During the last weeks of vegetative growth (week 10-12) she got significantly more intense training, a lot of branches and leaves were removed in order to allow the lower parts of the plant to get as much light as possible. I also topped several branches. Due the size of the plant, on week 12 veg I decided to halve its size by bending all the branches that had passed the first lollipopping phase. To support the plant during recovery from SuperCropping I mounted the ScrOG-net, which will also allow me to keep those branches low. I must confess that it was very satisfying to push this plant to the limit and then watch she recover in just a few days. Height at the end of the veg stage: 55 cm. During the veg stage PH was always between 5.5 and 6, about EC I started with 0.8 and was 1.7 on the last veg week. 🌸 FLOWERING STAGE (10 weeks) I started this phase after 48 hours of darkness, Then changed the DWC solution for transition. I focused the training on the first 4 week flowering, mostly LST and defoliation, then mounted another scrog to support and open the canopy even more. Stretching stopped during week 4 of flowering, doubling in height despite bending branches through the scrog-net during the transition phase. She showed pre-flowers around 20 days after the switch. During the last six weeks of flowering (weeks 5-10) I simply paid attention to the PH-EC levels to provide the roots with optimal conditions. I then kept the TEMP-RH-VPD-PPFD values ​​under control with the Tent-X which allows me to provide optimal conditions also above. Height at the end of the flo stage: 100 cm. During the flowering stage PH was always between 5.6 and 6.2, about EC I started pretty high, EC was 2-2.2 during the transition, then I raises it up to 2.4 in the fattening phase, then slowly downed it during the ripening. In the end, there were five flush days before the cut. ✅ HARVEST - From sprout to harvest: 152 days (84 days veg + 68 days flo); - Harvest on day 68 from switch, when trichomes were about 95% milky and 5% amber; - Wet trim, removed fan leaves. ✅ DRYING - Time: 8 days; - Average: 23° C - 55% RH; - After that I made a dry trim, removed branches and sugar leaves. ⚖️ DRY WEIGHT 290 gr buds + 50 gr larf. I also collected about 5 grams of finger hash after the trimming session. ✅ CURING Curing is done after 60 days with Boveda 62%. 💯 SMOKE REVIEW After 60 days of curing, buds look frosty and shiny! Due the trichomes stage when I harvested, effects are definitely on the sativa side. After smoking it I feel euphoric and in a good mood, I will smoke it mainly during the day. As for the flavor, I can detect some pungent and earthy notes, very consistent smoke. It reminded me of my years in Germany, when we would drive to Holland to stock up on White Widow 😍
Likes
10
Share
@6toecat
Follow
Using a Rhaspberry Pi 4 to automate the watering and a TP-link 105 smart plug to automate the Viparspectra P2000 LED grow light. You can see how I automated it here: https://hackaday.io/project/188129-rhaspberry-pi4-basic-watering-system-for-balcony Basically, this is an "Automated Watering how-to Guide for Dummies" - as simple as technically possible. You still require some basic command line expertise, but the steps have been proven and I provide links to the gear I used AND the Node Red code, making this EASIER than anything else I've seen online.
Likes
6
Share
These lady's have been taking there sweet time initially wat I thought was going to be a ugly one turned into the best and most frosty one I got in tent although none of my ggxwws look the same but two but this strain has grown very good and has one hell of a smell to them...well this week was going good but had one turn hermi on me lucky I caught before it got bad and got it removed before it pollinated my others
Likes
6
Share
This plant grows like crazy very strong genetics ,massive leaves and thick stem ,week 3 now strech its over she’s cleaned and now just have to start pumping those flowers ,getting more thirsty with every day very nice dark green colour with only 2-3 yellow leaves which i took off but hey she will pack a punch i guess so this is for now love
Processing
Likes
3
Share
I love this plant! It made some huge fan leaves and the branches are super symmetrical! It loves the higher amount of nuts. Very easy to train it, flexible branches. Looking forward to seeing if the buds will be just as big as the leaves!
Likes
22
Share
16 days of slow drying each plant with the environment controlled inside the tent with 2 meters. I have two fans on, pointing at the floor to circulate the air temps - 20 - 23 º humid - 50- 60 %
Likes
28
Share
Due premature sono state tagliate a 48f giorni Appiccicosissima puzza di limone