********** Week 2 of flower - Sept 26 to Oct 2/20 *********** It has been an exciting week with finding a crack in a main stem and started new supplemental nutrients as well. On Sept 28 I found a crack and had to do some repairs. Gorilla Girl was better off than one of the Cream 47’s with a cracked stem. GG4 was caught early enough that she didn’t separate much at the base. Looks to be as though I have caused the issue by topping the main stem a little too low😢 Coming back though and when tied together and looked after, its crazy how these plants can heal themselves😀💪👍 Took the tips from fellow growers and decided to try and fabric something with some cushion so that the straps holding the branches together don't cut into the branches. Needed another tool of the trade.......DYNAVAP to calm the nerves😀 because the grow has been going well and this set back has me pissed off as it is grower error😡 Seems to have worked out pretty well. Switching the PK booster at the end of the week to Big Bud and started to add Rezin from Green Planet. Not much for Bud Factor X left so will run with Terpinator and Rezin as a replcement. 2nd layer of SCROG netting added early in the week, Sept 27/20. They are pushing out a good amount of leaves now and stretching so need to provide that added support for down the road. IPM spray again this week, last opportunity, with Plant Therapy. There has been something in the tent and I think I have killed them. One more shot though to make sure and before there are too many bud sites. Love this product!!!!!! Works so well at getting rid of thrips and mites. Really good growth this week. I need these girls to stop now though!!!!! They getting really tall and have roughly 12” above the canopy now. The node stacking is really good and they are forming a number of colas. Looking very positive so far! This strain is so vigorous and she just want to go👍 They have gone from 18” tall to 34” in a week......crazy good growth. Little more detail........ Sept 26/20, Day 8 - Little heavier feed as they have not been watered for two days - 4L - CalMag @ 2ml, Sensi Bloom, B52, Bud Candy, Bud Ignitor @ 1ml - 830ppm and 5.7pH - will start to let the pH rise bit now over next couple of weeks - side branching doing very well and coming up. - GG4 a little bare in the middle of the plant with just four colas. Sept 27/20, Day 9 - 2nd SCROG layer added. - GG colas getting long........need to add more Silica as well. Sept 28/20, Day 10 - more microbes today - 4 L - Microbial Mass @ 1.5ml, CalMag @ 1ml - 290ppm and 6.3pH - pH was a little high but left it...wasn't moving and then boom,,,,,,,oh well. - Good amount of runoff today. - GG4 has one cola leaves not happy. Not sure if its light or wind. Moved the closest fan to her today. - GG1 shooting lots of branches right now. - GG4 bud stacking is happening already and doing very well. Sept 30/20, Day 12 - Heavier feeding today - 5L - CalMag, Vitathrive, Rezin @ 2ml Rhino Skin, Bud Candy, B52, Sensi Bloom @ 1ml. - repaired the cracked stem a little better tonight......not as bad for this girl. - Try and keep the paper towels wet now so the humidity is high around the wound. - Should have left a little more branch from the node above when cutting the top. Oct 1/20, Day 13 - Switching PK booster today to Big Bud......these two girls are past bud ignitor.....already stacking. - 3L - CalMag, Sensi Bloom, B52, Bud Candy, Big Bud @ 1ml - 665ppm and 5.9pH - Since these girls are so tall I am not going to give them Green Planet Massive. I find they get quite a bit taller with that product. I am looking for chunky and not tall so I will keep up with Advanced PK boost. - IPM spray tonight again with Plant Therapy. Think I have seen some bug damage on Cream 47 girls. That takes us to the end of week 11 in growth and week 2 of flower. Time will go quick now that we are off and running. Will be done feeding by early week 7. Want a good flush and leeching on these girls to get all the nutes out. I have been missing it by a few days on the last few auto runs and want this photo run to be better as I have a better track of weeks and when she will be done..........should be the end of week 9 to first days of week 10 of flower, about 7 more weeks. Cheers Growmies and have a great week. Thanks very much to Mr_Motalovah and spacecadet55 for sharing your comments on cracking the main stems. Should be avoidable next time and appreciate the knowledge🙏👍 Looking good Sweet Seeds, she is a grower and filling in already in first two weeks of flower........If you veg longer than 3 to 4 weeks, make sure you have allowed for height concerns💪

TrainWreck coming in on week 10. Buds are stacking beautifully getting good even growth among the bud sites. The smell is amazing! Soil ph is 6.3 for both girls. Tds run off is 980. Day time temp is 78 and 50%Rh. XS2000Light is at full 100% & killing it!! Drop a comment below lmk what you think of the TrainWreck grow so far thank you taking your time an viewing. If have any more questions can always DM me. Thank you an happy growing! Update flushed the train wreck mid week. 10g @ 6.3ph. Flush ended at 435ppm Top her off with a light nute hit of P&K tds reads 900. Be the last time I hit her with nutes just plain water from here with a cup minimum of run off. an slowly be lowering the ppm to 400 range before 36hr dark period.

Evening fellow growers hope you all had a great weekend. Massive shout to James @RQS for supplying the beans for my current grow. ⚠️ I add photos as the week progress so please stop by and check out the progress. Day 29 the start of week 5, we have started to flower so I will add some flower nutrients this week. Really happy with how these 2 lady’s are progressing. Very bushy low riders. Let’s see what this week brings. Day 31, watered today, upped the amount in water too 1 ltr as these girls are growing. Also added bloom into the mix. I will take some current photos either later today or tomorrow. ✌️ Day 32, just leaving these ladies to it. Low riders 👊🏻✌️ Day 35, the end of the first weeks flower. The front one is nice and short with an even canopy the back on I topped and haven’t really done much else with as didn’t want to stress her anymore. She is loving life. Watered with plain water last night will most probs give another grow feed then onto the bloom. Been rather cold the last few days so hopefully they will be ok. ✌️ Once again thank you all for stopping by and showing the love. ✌️

Welcome back This week i did some more LST as you can see, Gave them water with enzymen and gave them water with nutrients. They grew a little but not that much. I really want to repot them but the outside temperature is still 12-15 degrees at night so i don't want to do that. The plant i didn't want to keep has been outside for a week now, gladly it still grows but not that fast as the other ones so i was right to not put them outside yet. I will keep an eye on the outside plant if it still wants to grow for another 1-2weeks, if she does, i might put all the plants outside and risk it. Why? Because the plants already start to stretch futher away then the size of the pots, i dont like that. Also if they have more space to root, the plants will grow faster and bigger. The color of the leafs look a little light but that because they are in full sun light. They are perfectly green in my opinion and so far no burned tips so my feeding goes well. They start to drink more as well. I will spray them again today when the sun goes down with Canna Cure! I can't say it enough how much i like the product, it keeps insects and molts away and even keeps my leafs nicely green. ps, when i bended the brances after topping a few weeks ago, i didn't kept the upper brance for a few centimeters intact, most of the times i do that( to give it more support) but this time i decided not to, just to see what happens. Well indeed you get some cuts into your brances, but when you are carefull you will be fine and you get really strong brances from it, therefore i like it this way. Enjoy :)

Sundae Driver (Fruity Pebbles X Grape Pie) - This time did a mild prune, really loving the Kyle Kushman technique, definitely gonna save time on dry trimming.

The transition is officially happening—the plant has now fully entered the flowering phase!🌱 The stretch is kicking in, and it’s growing rapidly, really taking off this week. It looks incredibly healthy, with vibrant green leaves and strong development. Thanks to the LST, it has spread out beautifully, allowing for even light distribution and great bud site exposure. I’m really happy with how things are progressing and excited to see how the buds start forming in the coming weeks! This one is looking very promising.💪😎

3rd week in and just transplanted my 6 girls! All spitting white pistols! Can’t wait to see what these girls turn out like! They are pumping along and am very happy with growth rate and health!using fabric pots as I like the soil to be able to get air! Using 1 litre of perlite to 25 litre premium potting soil! The potting soil itself is very coarse aswell to allow for good drainage! I fertilised the last 2 weeks and willl continue! Another 3 weeks under the fc 6500 by mars hydro then flip to flower! Will keep posted! My first grow using the newest LEDs instead of the old hps. Happy as people thanku

I am officially in flush now and they have started to fatten right up! The smell is incredible so strong smells like bud fuel ahahah can not wait for the end result and taste these beauties!

March 21st: I finally got a camera up and running, so i was a little impatient and took pictures last night. I hope the video works! Light intensity made it up to 100% with no negative effects over the week. Second week of no nutrients! It doesn't seem to mind so far. Those nugs are still getting bigger and bigger. They are starting to weigh down the branches and make them bend downward. She still smells like a freshly opened bag of sour skittles. The trichomes creamed up a bit since i checked them last week, so i might only need to wait another week! But, i'm still going to expect it to finish in two to three weeks.

One didn't get hit enough water from the sprinkler so it got stunted hard and had to go, the plan was to only do 2 this run so all good, I used this one in a breeding experiment and it recovered very well despite the conditions, but this is not part of this diary. Starting this week I will also add ORP and CF metrics, the ORP probe is not calibrated and values are to be taken with a grain of salt. Values are average of the day. DATE - °C - RH% (Tent Temp/RH) 20240718 25.9 56.2 20240719 27.1 52.5 20240720 28.0 54.3 20240721 26.8 64.4 20240722 25.1 57.9 20240723 25.8 58.8 20240724 25.6 55.8 DATE - PH 20240718 # 20240719 # 20240720 6.01 20240721 6.05 20240722 6.14 20240723 6.15 20240724 6.15 DATE - ORP (mV) 20240718 # 20240719 # 20240720 31 20240721 27 20240722 24 20240723 23 20240724 21 DATE - EC(us/cm) 20240718 # 20240719 # 20240720 2050 20240721 2071 20240722 1978 20240723 1973 20240724 1993 DATE - CF 20240718 # 20240719 # 20240720 20.50 20240721 20.71 20240722 19.78 20240723 19.73 20240724 19.93 DATE - °C (Reservoir) 20240718 # 20240719 # 20240720 23.6 20240721 23.9 20240722 22.5 20240723 21.9 20240724 22.1

Harvested waiting to dry

This week has been great! Germination on all 4 Pre 98 Bubbas and 2 Dirty Blondes was a success!! We planted them in there pots an through out the week we gave em each a very light spray down of pure water phd at 6.5 and by Friday they all popped out the soil Let’s go!!!!! Next week we will start light feed on nutrients , so y’all keep them eyes peeled for next updates an I appreciate y’all for following my grow !!😶‍🌫️💨💨💨🙏🏻💚💯🤙🏻

2 Girls 1 Cup week 9? Short term memory loss is a m'fer... *edit* i have talked directly to quite a few suppliers/vendors/etc... and i can tell you FastBuds is a great company to do business with. im not licking boots here... i paid for my beans, and am loving these FastBuds genetics so far. JUST LOOK AT IT! a little short, but i think thats my fault from around the day 21ish mark if ya look back in the diary. i told myself i wasnt going to run any more autos, unless it was some odd occasion. but IF i do in the future... it WILL be FastBuds. unless this pink runtz i have ends up being an auto, and if it is.. im going to off the fucker lol. Day 56- GC is trying to catch up. I think stabbing the main helped a lil lol. Few random plucks on WG tonight, and don't even want to start on GC for now. May clean it up a bit later depending on how the back feels. It's got a ton of branches that are going to be too close REAL soon. Kinda f'd GC off over a week ago, and said I'd run it again in the future to make up for it. So not too pressed on how it looks, as long as it stays alive until WG chopping day. Atleast it wasn't a male 🤣. Anyway, bumped the girls up to the "aggressive" mid bloom GHE feed. Using TAP water to reduce the amount of calmag needed since mine has N in it.. Breakdown as follows: 5gal TAP water - 137ppm 15mL calmag - up to 252ppm 10mL hydroguard Micro- 33mL Grow- 33mL Bloom- 47.5mL RES total after PH correction - 818 @ 5.91. ============================================================================================= Day 57- I REALLY need to cut back GC... like yesterday... backs been hurting something fierce, and I'm out of my medicine of choice ATM. few random plucks on WG today. may make my way in there again later and start hacking away at GC. will update pic if I do. They're both liking aggressive feed, maybe a touch too heavy on the N though. *edit* 🎶oops, i, stabbed it again...🎶 lol. still feel there's a branch that's gotta go. Started pulling WG out some to help expose lowers. Need more garden wire for sure ============================================================================================= Day 58- cut back GC even more.. we'll keep it alive, but I'll make sure it doesn't block the beloved WG. remember, there will be a list of things I learned I did WRONG in this experiment and will share at the conclusion. Trimmed up WG little bit later in their morning. Top view pic is after the small defol. Some fans only had the middle finger snipped, to be on the safe side. Progress seems slow on WG atm, but it's getting ready to fatten up and mature. ============================================================================================= Day 59- i just cut back GC AGAIN!!! like HALF of its branches, and cut all the tops to the same length before snapping todays pic. after comparing 58 to 59's pic... it STILL looks like it grew.. WTF... that things confused ASF or something... just dont herm on me... WG finish is right around the corner.. a few weeks... hang in there GC... hang in there... ive been topping off with 80% strength nutes and RO water, and the EC has remained pretty consistent. may bump em up one more time for WG next week to help fatten her up some. right before we dial it all back for the end. WG already looking pretty frosty, and the weatherman is predicting some more in the next weeks. *edit* added a night vid to show my WG defol struggles. Its easier to see why the foliage looks so thick and it needs a trim when lights on when you see lights off.. We're down to a few fans towards the bottom to help out down there. Rest are connected to bud sites, and are limited. May need to add a small fan blowing up WG skirt soon. ============================================================================================= Day 61- nothing really to report. tried to kill the ice probe, and put frozen 1L bottle (in 12hr rotations) to see how it performed. i think 61.2 is a little too cold for my liking, and one morning i woke the temp was over 71.. the roots are messing with the flow and the water isnt getting chilled as much with the probe. problem ive been facing for the last week or so. ice probe back in, and warming up the tent with its exhaust again.. should fab up a duct system for a 3d printer... ideas... tinkercad here we go.. ============================================================================================= Day 62- kinda feel bad for leaving GC out of the shot yesterday. Since she's riding along in this experiment... added her back today. WG is starting to phase 2. Her finish is coming within the next 2-3 weeks I'm guessing. Maybe 4? We'll see what tricomes say when the time gets closer. ============================================================================================= Been offered a cut off a custom strain that looks and tastes AMAZING! i know i may have mentioned pink runtz or amnesia lemon next... but i dont think i can pass up this opportunity.. will mention more about it, its name, etc etc when the time gets nearer.. As always, thanks for stopping by and checking out my current grow experiment. Link to YT vid of the day 27 on timelapse https://www.youtube.com/watch?v=fJO-eTeyyEU

9/27 9AM Water only abt 12oz each plant. #1) 1 1/4" #2) 1 1/2" #3) 1/2" #4) 1 1/2" 10PM Started a White Widow Auto seed from HGCC in 20ml Distilled water to take the tent space of my #3 Devil Auto. Will be moving her to the Livingroom to see what happens. 9/30 9AM watered gave cal-mag 1ml gal 90ppm #3 was not as dry as the others. possibly not getting hit by the fan as much. rotated garden clockwise. watching for stretching #1) 1 3/4" +3/8 #2) 1 5/8" +1/8 #3) 5/8" +1/8 #4) 1 5/8" +1/8 9PM White Widow came up. 10/1 Watered and raised light 2" 10/2 Rotated plant locations Week ended with good growth and no major issues.

Was a good harvest wk. Think I pult about 5 others plants that drying week. And she held her smell from the start to the end of curing. No bushwhack smell (hay). And got some decent strong weed. Although not my favourite weed. In its own right for what it is. It is what it says. So, hence the 8 tars.

Привет садовники !!!

Cruise control. Buds are getting thicker.

I know that it may seem like a lot of nutrients at first. It’s not. A lot of those mycorrhizae ingredients are mixed into my soil well before the germinated seed goes into the pot. I make my own mix of soil using some of those ingredients. I like to use the great white mykos because of its powders consistency. Makes it easy for a clean transport from germinated bean to its forever home. For watering, they have been given only plain RO water with a neutral ph. Just yesterday I gave them a little tiny mix of Medusa’s magic, Zeus juice, and Gaia mania. I have used Oregon’s only brand products for a while now and I absolutely love them and better yet, I understand them. They have responded super well already to their first drink of bottled nutes with a ph of 6.3 . I’m keeping a RH between 50 and 60%. I’m also keeping a temp during the day at around 78-81°f. Right now I’m not worried about a night time temp but I do run cooler lights for about 4 hrs every day, dropping to around 70-75°f. Eventually I will add my second light boosting me from 600w too 1200w. Also they will begin a 20-4 hr light cycle. I find these autos do amazing with a little rest for 4 hrs. Allows me to pull more resin and color in later stages of life by dropping the temp lower than usual with the lights off. So please if you will, stay tuned and I’ll have much more info and much better videos and pictures for you to all enjoy. Thanks for looking! ✌️🏻

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Day 33 and she's looking great, getting bushy. Day 31 and 8" tall. she's sprouted a little overnight. fed with biogrow today app 400ml