10/31: I fed today with one, signal, sweet & sticky, beastie bloomz, and silica. This strain smells really good..kinda exotic, but it's much leafier than anything else in the garden. They could probably have used less N throughout their lives.. 11/4: Fed with one, signal, sweet & sticky, beastie bloomz, silica, and humic acid. They are fattening up well now and starting to show me some trichomes. Very peculiar aroma....can't quite place it...

Ultima settimana di vegetativa, due mesi totali

How do you produce electricity with living plants? By using the natural processes that already occur. In short: the plant produces organic matter via photosynthesis. Only part of this organic matter is then used for its own growth. The rest (40% of carbon capture) is excreted via the roots. Around the roots, bacteria feed on the organic matter and they release electrons. If you’re able to harvest the electrons into an electrode, you can couple the first electrode to a counter-electrode and build an electrical circuit, like in a battery. The electrons flow back into the natural system via the counter-electrode, so it’s completely circular. 0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Magnesium (Mg) is a chemical element classified as a light, silvery-white, alkaline earth metal, and it is the lightest structural metal. Magnesium is a central component of the chlorophyll molecule, the pigment responsible for the green color in plants and vital for photosynthesis, where plants convert light energy into chemical energy. The photoelectric effect of 285 nanometers (nm) ultraviolet (UV) light on a metal surface causes electrons to be ejected with a maximum kinetic energy of 1.40 electron volts (eV). *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond. A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. The optimal pH for nitrification is between 7.5 and 8.6. Nitrification is the process of oxidizing ammonia to nitrate and nitrite.

This was my first attempt at growing autos she triggered a little to early being the reason she is so squatty but I'm sure she's still going to be just as good as a plant twice her size I most definitely learned a lot about the auto flower that I didn't know before so I made adjustments on my second auto flower that I'm growing she is about 40 inches in height and filling out nicely i'm going to let the plant pictured go another week or so to make sure she's completely done I will post pictures and video of the harvest

Day 98 Day 63 Flower 30/05/24 Thursday Finally the time has come!! The fox tails aren't a issue for me as it's Percy smoke, and to be fair, there decent fox tails 😍😂. The plant is huge for a auto. I have wet trimmed, Removed all excess stem. Wet bud weight is 587g Wet trim is 35g I will update dry weight and smoke report 👌 Thank you to everyone who liked, commented and followed 🙌 Love for the grow 💚 Till next time ✌️

Hey everyone at week 4 know and wow have these girls grown early this week I applied some LST and all took really well to say it was my first time trying this

2017-09-11. Kl 12.00. Week 3 starts. I have cleaned the whole room for the new week and gave the girls water and nutes. Added videos and pics. Girl is 11 cm high. --------------------------------------------------------------------------------------------------------- 2017-09-12. Kl 10.00. New pics and video. -------------------------------------------------------- 2017-09-13. Kl 22.00. Added new video. ---------------------------------------------------- 2017-09-15. KL 10.00. New pics and video. The girl is 14 cm high. --------------------------------------------------------------------------- 2017-09-16. Kl 10.00. The girl is starting to grow little better now and i hope she is picking up the pace. Added new videos.

Flipped last week, starting to tretch a little. Worried about the stretch Been watering until runoff each time and seeing better results. The girls sometimes end up really hungry because I an really being careful with the nutrients, but a day or two after feed they darken right right. Slowly turning up the lights up 1-2% a day to harden them off. Giving transition formula for the nutes - supposed to be 2ml per gallon for all three base nutes - I add a little less bloom until about 2nd week when I start to really enhance the P and K.

Heavy defoliation reduced a lot of yield

Just starting to poke out their first divided leaves. Put some mushroom mulch around the base of the stem to prevent the cover crop from moving in too close and blocking out light to the tiny seedling. It's been raining here today and it looks like it gonna continue but our cold frame allows us to control how much water gets on the seedlings (which is nice). Gave them their first compost tea consisting of green and brown vegetative matter, worm castings, some mushroom compost, and General Hydroponics subcultures M and B. Used the leftover vegetative material as mulch. Trimmed cover crop again.

Just fed her water this week. Stretch is real in this week. Gheeez 😩

One of my favourite plants to grow so far. I learned a TREMENDOUS amount, especially all the ins and outs of supercropping. Although I did end up breaking my stalk, she turned out quite nice! I can definitely see myself supercropping plants in the future just to play around. The terpenes are also really nice on this girl. I can't wait to make some bubble hash and rosin. And I generally can't wait to grow this girl again knowing what she needs now in terms of training. Will also be nice to see the difference with organic dry amendments vs the FF wet nutrients I used.

My first try

During week one we trimmed up a bit and staked. Plants are doing well but are not drying out(drinking a lot of water, even the larger ones). We also hand feed for a whole week as to avoid early overwatering with the auto system. I just came back from adding nutrients to the reservoir. There is a small thrip problem, we have sprayed two days in a row with something the grow store gave us for free, and decided to give it a shot, it never hurts to change up the pesticide schedule I have seen very little fungus nat activity thus far. I also reduced the automated watering to 50% using the valves since we can’t choose anything under a minute for feeding. Current auto feed schedule is once for a minute 15 min after lights on and once for a minute four hours later. Plant health is overall good. Only concern I have at the moment are that all of the harambe plants new growth are extremely light green in color in comparison to the other plants But they are also slightly bigger by 4-6 inches and closer to the light. My only guess at the moment is transplant shock from LED(veg) to HID(bloom) or they are slightly too close to the light I super cropped 2-3 harambe plants that were stretching a bit. Hopefully if proves useful in the long run. Day 12 update: Plants are drinking water at a very uneven rate creating over watering issues. I’ll have to look into flow adjusters per plant in the future. Reduced automated watering to once a day and I’ll just check in daily. Also noticed heavy foliage growth on most plants. I spent about an hour pulling large fan leaves that were covering tons of potential budding sites. Some of the Colin OG are already starting to pistol up, always a nice sign.

Threw big supercroppers on the main stalk and they are happy with their LST. Will probably stake down the sides branches here soon. ALL HAIL MARSHYDRO the best light company!

This week has been time to put on weight!! They are getting so heavy glad put in secondary scrog net. Have only been doing water so plants can just pull what they want our the soil they are starting to fade on their own. They have some amazing kinda blue tent to the buds. They have a gassy sweet smell to them! This will be the last week I feel but still see some clear heads and no amber so shall see over next week!!

This was the first time using the LED panels, they have much better canopy penetration than HID. I started at 12 inches, the leaves showed signs of light stress. The lights were moved back 6-8". Fan leaf growth rate is averaging 1/4" a day. 18"H x 6"W.

Tag 25: Umgetopft in einen 15L Topf, die Triple G zeigt außerdem ihre Vorblüte. Tag 27: getoppt bei 5 Nodien. Tag 30: Entlaubt (alle Sonnensegel am Hauptstamm entfernt) und mit LST angefangen.