Likes
Comments
Share
@OBXGuy61
Follow
Big big week. Site prep in woods 400 yards from home, middle of neighborhood urban GG. Babies getting strong indoors as temps outside are cool at night on the 50’s but hot in the day, around 72 - 77, Some fun inside and outside.
Likes
88
Share
@Roberts
Follow
Gorilla Jealousy F1 is growing good. She did have to get neem oil treatments 4 days ago, and today. There is a mysterious critter in my space. I am not sure what it is. Treatments are to stop ot and break the breeding cycle. Hopefully I eliminated the pest in the course of this. In about 2 weeks she will be moved to a tent to flower on her own. She is a bit ahead if the rest in the room. She was trained, and treated today. She is ready for another week. Thank you Seedsman, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
98
Share
My baby is turning into a lady. She really loved getting a larger pot. As I plan to veg her for about 8-9 weeks more, I imagine she will eventually end up in a 30L pot. Not much more to say, she seems to enjoy life in the green house so far.
Likes
24
Share
I have had a blast growing this plant inside this LEAF unit. There was very little I had to do in order to have so much plant. I cannot wait to add another diary with some more grows. The smell of the plant is incredible and will only get better. The smoke is gentle, and it actually leaves a Minty feeling in your mouth, this was surprising but really cool given the name of the plant. I will start my next grow in November, be on the lookout for that journal. Final Dry bud weight 443g! If you like this journal and would like to have a similar experience growing your own, go here. www.GetLeaf.co
Likes
4
Share
@Boscaglia
Follow
Nice progress this week with the left plant. The right one is showing some deficiencies on some leafs. A few bugs were also spotted, nothing major but I placed a couple of sticky traps. The smell inside the box has increased quite a bit, but still no smell outside.
Likes
59
Share
doing well so far I'm wondering if the one gallon container I have it in is enough
Likes
42
Share
@Gabarram
Follow
25/11 Day 73 already and starting another week (week 4 since I changed the photoperiod); budlets are not completely formed but still look like more of preflowers. She continues to stretch, she's growing 4-5 cm per day, a complete beast. I think she could be stretching more before the aspect of the preflowe/budlets cahnge much. Comparatively with the pictures of other Grinspoon's growers, the flowering stage is going on very slowly...well I thought the same when she was at vegetative stage, I saw everybody's Grinspoon specimen was much bigger and much sooner than the one of mine, but in the end her growth has been so big that I 'd have liked better she hadn't grown that much. She's entirely taken over the grow room! The light spectrum I use does not promote much stretching per se, as I've seen it on many other hybrid strains in the last two and a half years since I have this system. It's a 80cm*80cm*160 cm grow box (Darkbox) and so far I think the environment for the plant is, in general, let's say fine (except perhaps the hottest days of summer and the coldest days of winter). Humidity is a little high, becuase my place is humid and I don't specailly control it but I'd guess it is roughly 60% HR throughout the year. Being that said, I blame this stretching entirely to her genes and yes, my lack of caution to have prevented all this enormous growth from happening. Really I didn't want to regret later, of not having the size of the plant I wanted and also for not knowing how much she would stretch (I wouldn't have thought this much) I let her grow more than I should have. But one learns from his mistakes and by growing new strains, every strain has different phenos and one never knows which is destined to one's plant. The fertigation solution is now 0.5 mL/L Pro-Silicate; 1,3 mL/L Cal-Max; 0,4 g/L Flower Power Bloom fertilizer at pH 6.1-6.2, EC is 1.35 mS/cm and I raised the fertigation volume to 6L keeping the frequency. Day 74 (26(11) she keeps on stretching, I'm seeing another way to raise the lights the maximum I can, I see the budlets forming more definitely so I don't think she'll be stretching much longer, perhaps and luckily this week she stops doing it. Meantime all I can do is keeping the tallest shoots out of the line of the led lights to prevent bleaching of the leaves or the budlets being burnt. God help me with this. I'll post some pics tomorrow if I have more time. My plants do take more than 60% of my free time at home (but I <3 growing marijuana). Day 75 (27/11) I used a few hooks from the bathtub's curtain to hold the growlights and managed to raise them a precious distance. Day 76 (28/11/2019) i jumped off the bed to assess the sitaution and evertyhing was normal, a big blade burned it tip for proximity to a led light, but the bud tips seem no to be damaged -yet-because of the strong lights/heat. One fertigation (inflow EC 1.35 mS/cm. EC run off 1,5 mS/cm) "en dan ben ik klaar met haar". Day 77 29-11-2019 she keeps growing tall and she's become something almost unmanageable. A couple of shoots have surpassed the lights. If only they won't be burned 🙏 Day 78 (30/11) She seems to be stopping growing. When I saw her I realised extraction fan was gone, fortunately being Saturday I could find a replacement soon. I find that run off pH is 5.3 (collected at the last portion the run-off, 2nd fertigation of the day. Isn't it a little too acidic to leave this issue untreated? Day 79 (01/12) after a reply from @knut at cocoforcannabis.com I am advised not to take in consideration runoff pH but to take care of pH in and EC "in", as for the runoff, just checking EC, because pH varies for the interaction between nutrients and is of zero interest, so I was told. The extractor is working fine and it is a lot more silent than the older one. Last for today, I'd say I'm happy she seems to have completed the stretching phase, although there are a few shoots at scarce centimeters from the ceiling of the box as a consequence. The other shoots are fine, at a reasonably good position from the lights. It was very hard times with these last weeks and the damned stretching. If I had to evaluate the growing difficulty of this strain, I'd say "quite hard" because she's pretty much unmanageable at the stretching phase, unless proper caution measures be taken before it's too late. Day 80 (2/12/2019) To end week 12 (4th week flowering) I see it seems that stretching phase is over so I can breath again. She still may be growing one or two centimeters, that I dunno for sure, but judging from the accelerated rate of stretching I have seen since the last two weeks, it appears that she won't get taller. She's almost tocuhed the ceiling :/ I see a slight swelling of the baby buds, like the calixes that are starting to form.
Likes
9
Share
This is the first aerogarden grow I’ve done that I actually had to remove the light and place it in the closet with my other plants. Had a little foxtailing because of that but a great grow otherwise.
Processing
Likes
7
Share
@Kushizlez
Follow
Day 70-77 (Day 71) Not exactly sure why but node spacing on bbb 6&7 is super tight still. Their stems are also harder and less bendy, almost like they’re root bound. Bbb #5 in my veg tent is looking bizarre and I’m at a loss for what to do. I’ve been looking up and asking around about the leaf crinkle and no one seems to know what’s wrong. Trashing a pheno of this would hurt. It could be a keeper too as I don’t think the problem is genetic. It’s definitely root bound but that doesn’t cause contorted new growth like that. I’ve concluded that it’s my dense soil coupled with root bound issues, overwatering and high RH. (Day 72) Later tonight I’m going to give bbb 5 a bath tub flush until it’s reading 200ppms, drain it well and then transplant into a 3g pot with lightly amended soil. I’m also going to give it a light defoliation. I don’t mind stressing the shit out of this plant right now because I won’t be flipping for another week at least. With the small container it will run out of amended nutes mid flower so I will hit it with a few synthetic feedings around then to test out the smokabilty and taste compared to organic nutrients. I might as well give the rest a good defoliation on the rest of the plants too. I will try to get most of what is under the trellis. (Day 73) I definitely defoliated #7 waaay too much. Since it’s tucked away in the corner and a really bushy plant I can’t train it as well as the others. I cut most of the sucker branches and the majority of the lower fans. This should prevent the need to defoliate at all until week 3 of flower. (Day 74) I’ve been reading that higher temperatures with a high RH can affect growth big time. It could be what’s causing all the crinkling and twisting. And now that the plants are in very late veg they could probably benefit from a lower RH. When I was running my temps around 74-78F and 70% RH I was in the perfect range. Now that I’m around 82-86F with the same 70% RH that could be what’s causing it. Hotter air holds more moisture than cooler air and proper vpd at 84F is around 75-80%. I’m going to turn up the speed on my carbon filter and set my controller to 75%. If I don’t see a difference or it gets worse I will drop to 65 and go from there. (Day 76) I finally got the lights raised up another 4 inches or so. It’s not much but it should help reduce the intensity and stretch the nodes more. I’m starting to think the super tight node spacing and droopy/contorted growth has more to do with something I’ve been reading about called ‘soil compaction’. Apparently farmers often deal with compacted soil in fields from running tractors over it all day. When I potted the plants I gave them a good little jiggle to compact the soil down further so I could fit a bit more in the container. I think this could be the culprit as they don’t seem to be drying out evenly. Even the plants in my other room are not drying out like they should and it’s probably from compacting too. With the addition of rock dust and dry amendments the soil can become sandy/clay like and retain a lot more moisture. Wish I would have added a few more liters of perlite and packed the soil a bit looser. Either way I need to get this problem sorted ASAP before I get root rot. Earlier in the season when I overwatered, I stuck a fish tank air pump into the soil and it aerated the soil enough to prevent overwatering. The only reason I discontinued it is because it didn’t have much effect in the 1.7g pots. I just ordered a 36w 6 way fish tank pump that is way more powerful. It was 50 bucks and I’m willing to take a gamble on it. It seems to be my only option at the moment because I can’t just repot. Worst case scenario I can use it for brewing compost teas if it doesn’t work. I’m not sure how well this will work in a giant fabric pot but it’s worth a shot. I’ve heard of people supplementing additional air into raised garden beds with great results. I’m picking off some of the new auxiliary branches to try and widen the node spacing. Growth is definitely slow and stunted but no signs of deficiencies. I just thought of another theory on the node spacing... and the more I think about it, the more I think it’s the mystery problem. I’ve been foliar spraying with 1-1-1 VeloKelp at pretty high concentrations 2-3 times per week. I have heard in passing that kelp and seaweed can somehow reduce stretch. A quick google search reveals that Ascophyllum Nodosum Seaweed and other marine algae extracts contain large amounts of hormones and auxins that reduce plant height and stretch. *facepalm* Guess I’ll stop that for the rest of the cycle. As far as I know there is nothing I can really do but wait for the plant to use up all those excess hormones and nutes. The recent 0-0-15 seaweed extract and 1-0-3 kelp meal I bought is derived from the same kind as the velokelp. I guess I won’t use it again until week 3 or 4 in flower. Tight nodes are very useful in flower but aren’t desirable at all in when trying to scrog in veg. Especially when they’re like a half inch apart. It slows the shit out of a grow. Vietnamese and biker gangs in my area used to grow SOG style and use a synthetic PGR hormone (meant for bonsai trees) called ‘paclobutrazol’ that would make the weed rock hard dense so they wouldn’t have to pay people as much to trim it. I’ve heard that in recent years they have made the switch to using kelp extracts because paclo is getting harder find and is not meant for food crops let alone smokeable crops. I’m ashamed of it but I have smoked pounds of PGR weed long before I knew what a PGR was. 🤷‍♂️ (Day 77) One more theory. Ever since raising up the plants up onto that shelf the root zone is probably significantly warmer and the bottom of the pot (where most of the roots are) drys out way quicker. It’s possible that the warmer root zone could not be holding dissolved oxygen at the proper rate resulting in that over/underwatered look. Or it could be that I’m not watering enough at once to reach the bottom of the pot where the roots are and it’s indeed under watered. I’m going to water in a gallon when I get my new air pump and see if that makes any positive change. If I see the new air pump making a difference, I will flip on the 21st of April. If I don’t see a difference, I will carefully untangle the plants from the scrog net and remove the shelf. That extra foot should make a massive difference with ppfd and will cool down the roots significantly too. I’m thinking about grabbing a simple soil/compost thermometer to check the temp of the medium. Better safe than sorry. Rough week. Hopefully everything get smoothed out in the next little while before I flip.
Likes
2
Share
Day 14. Starting off a little slow so lowered the light to experiment. Looking healthy. I plan on doing LST on day 16. Day 16. First day of LST. Day 20. Supercropped the top.
Likes
8
Share
Photos from Day 1 to day 7 Sprouted 2 days after planted them. More or less I call them "B" and "S" because at some point, I guess in this first week, I may have overwatered a bit, one of them, and I think it made her grow slower during a week or so, before it got up to its growth again. I was only spraying them with water but I was doing it 2-3 times a day and may have done it 4 times once or twice... My first grow, I may have studied many videos and foruns, but somethings are only learnt when tried. And this "try" went juuust a lil sideways. Its ok Lights were at 50% I guess from the moment they felt earth. I found it fascinating how fast they grew in just 12 hours give or take. Check the photos I also used plastic bottles on tip of them in the first 3-5 days. Temperature inside it was from 22-28°C. RH 70-90%.
Likes
6
Share
@Rinna
Follow
This was a wild ride. Gave way to many nutrients and I realised this way too late, when lock-ups already started to happen. The buds still look very potent, I just think they had way more in em size/potency wise if the nutrients would've been on point. Not growing auto flowers indoor anymore, but I'll deffo be growing this one outdoors this year! The smell is out of this world, #1 smells like tropical fruit juice, #2 more of a candy-sweetness but definitely tropical. Can't wait for ya'll to grow this one!
Likes
57
Share
Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎
Likes
14
Share
@MG2009
Follow
02/23/2022 Lots of stretching this week,not much to say so I let the pics and videos talk for them selves🙏🏻 Enjoy Grape Skunk tall and lanky one I'm loving! I will number her for future reference. Biscotti Skunk has some droopy leaves, it's watering day.
Likes
24
Share
@S_Dubz
Follow
This OGgelato is a champ! Not the heaviest producer, but its been a real pleasure and was easy to grow. No matter what nutrients I throw at her, or aggressive pruning, she bounces right back. This week I found bud rot on one of my other plants in the greenhouse but this plant has so far been resistant and is healthy. I thinned the canopy and defoliated out quite a bit to create more air flow. I now have fans on 24/7 and sprayed with a mycorrizhal fungicide that suppresses botrytis. Also this week I have stopped pulling the tarp on and off each night (for total darkness) because it seemed to trap in too much humidity at night. The humidity outside has been 80-90% for over a week! And the rain was so heavy all last week. This week is slightly warmer with less rain so hoping we can make it. The trichomes are starting to get milky. I imagine I have 1-2 weeks left but am not sure. This has been a pleasurable experience for sure, but this is stressful right now! The smell is so strong you can smell it on my block. You can see *everything* from the alleyway adjacent to the greenhouse. I'm worried about mold and thiefs and can not wait for this to be dried and in jars!
Likes
6
Share
Starting to bloom. Continued with defoliation for air flow. Removed 5 or so leaves with mildew. Switched to bloom nutrients and hydra cal mag 2 days ago after 3 days of just ph 6.2 waterings/flush. Still healthy but a bit of mottling on older leaves and a tiny bit of nute burn on a couple of tips.
Likes
15
Share
@Growshh
Follow
Things are going smoothly, still stretching but keeping them under the screen.
Likes
14
Share
@GrowBuv
Follow
She’s back in the tent for a bit with the 4 new girls. Soon will be back into the cupboard once it’s all set up.
Likes
8
Share
@Tweak
Follow
Not much to talk about this week. Stretch is over, buds are beginning, only GG12 has any smell yet. Say hi and come again next week.
Likes
32
Share
@Fatnastyz
Follow
Week 8 10-14 Day 50 She looks, smells and grows well! Little studdered on drinking. What else but pics and videos! 10-16 Just water and pictures. Letting her do her thang! Around 500-700ml water a day. 10-19 Some burn, so I ran some runoff, yep burn! 1200 ppm now 400. 😱 Well 2 weeks from here 🤣 or so. 10-20 Nothing changed. .