Processing
Likes
Comments
Share
February 14, 2019 update: I rearranged the plants to get better airflow. In the video I mentioned that I thought I saw what might be spider mites. After closer inspection, I don't think its spider mites but more likely a combination of left over damage from the fungus gnats that came in with my wife's plant a few weeks ago (now gone) as well as ph fluctuations. But I like getting airflow on the plants themselves anyway, I just wish the oscillation worked on the fan I have now. I'll buy a new fan or two with oscillation soon. Also I failed to mention it in the video but there is also a ceiling fan blowing down on the plants. Overall, I'm very happy. The DinaMed CBD+ has taken the lead in the bud development category, Nice fat buds that are very dense. Sticky and stinky as hell too. She is supposed to be somewhere in the teens for CBD percentage and less than 1% THC. I'm hoping she either comes in below 0.3% or has well over 1%. I'm allowed to submit for testing 3 weeks before harvest. I'm going to cut a mid level branch and submit for testing next weekend. My other DinaFem strain, Critical +, is doing great too! She's in the lead with the most trichome development. Her buds are coming along great also! Not super fat, at least not yet, but great shape, color, density and have I mentioned the trichome development yet? 👍 This one is supposed to have mild CBD, low single digits, but high THC. I'm looking forward to smoking this one! Next up I'll talk about my Cream & Cheese CBD+ from Seedsman. She's in the lead with just overall looking awesome!!! The buds are long and super healthy looking with tons of leaves along the branches and I've defoliated a few times. The remaining leaves don't seem to be blocking much because most branches are bent over due to the weight of the buds! She is supposed to be in the 20's with BOTH THC and CBD. I'm looking forward to smoking this one also! 💪 That leaves the 3 Cherry Hemp plants. They are the smallest 3 plants in the room, but are all looking very good as well. They look like they are in the lead with possibly being ready to harvest earliest. I'm seeing the most amount of darkened and curled in hairs on these 3. The largest/oldest of the 3 is starting to show fading on the leaves. She may be ready in the next week or two. I'm waiting to start seeing some amber trichomes, so far they are still all white. These are supposed to be around 16% CBD and less than 0.3% THC. I'll be taking these in for testing soon and will be using these strictly for making CBD products - Salves, Oils, Capsules, etc... I'll keep you posted on this. This week I fed MegaCrop and Cal-Mag Pro (both by Greenleaf Nutrients). I fed according to their feeding schedule for late bloom. I think I'm going to stick with Greenleaf Nutrients for the duration of this grow rather than changing it up as I have been. Its super easy stuff to work with. 👍
Likes
2
Share
Alright so we started one overdose and one big demon for the Devine seeds competition. We're going to see which one performs best and enter her in. Which one do you think is going to win? Lol wayyyy to soon to tell. This girl is already on her way, through the soil a day or so before the other but we'll just keep them all on the same time frame. I mixed the Promix and Craft Blend from BAS a couple weeks before planting and we have a nice microbial population going for sure. I also just gave them their first Alfalfa Ferment watering so we should see A LOT of progress on the next couple weeks. Not much else to report on but I hope you guys watch along with me. See ya next week.
Likes
2
Share
Oct 5-11 Vegetative steering? Aiming for: leaf Temp -80f CO2 -1250ppm VPD +1.04 (65%/75F) Vegetative Steering 6P1/ 2P2/1P3 Each P1 water event is 15 minutes apart. Seems to far apart. I think i Need More water events, with less time in between events in order to get a strong veg signal? Watering for 2min(110)ml May need 3min waterings(currently not getting runoff) I have to hand water every two days. Day 11 flo 18.5inches tall 12inches from light(moved to 16) 1300ppm Day 18 Defol Sprout chickpea(2days) Soaked 1cup for 4 hours then rinsed. Completely covered then Soaked overnight. Rinsed then poured water out and layed jar on the side for one day. Blended with water(aloe vera and coconut) Day 19&20 foilarspray Alfalfa/Chickpea SST with Kelp,aloe,coconut,silicate,microbes brewed for 1.5 days Day 21 Fed the Tea blend Leaf temp 80 65kluxx Co2 100 Plants look like they responded well to the foilar. The flowers at this stage are my best performance yet .crop steering may be working?
Likes
7
Share
@mingokoon
Follow
WEEK 7 - March 14 - 20 I now have a good light meter so I rearranged the parts provide light efficiency trying to get close to PPFD for the age of each plant. ALL HAVE HAD CALCIUM MAG DEFICIENTCIES. I NEED TO ADD CALMAG TO MY RO WATER AND KEEP ADDING MORE THROUGHOUT THE GROW.
Likes
16
Share
I'm gonna have to try this strain again as the pheno that I got was not 'The One'😞. It didn't display the really dark, desirable, coloration in the leaves and was EXTREMELY sensitive to nutrients and water amount! Hard as I could try I couldn't get her dialed in. She looks and smells amazing but she ended up much smaller than I expected and was not a big resin producer. Have to see how she smokes after a 4 week cure!😛 I did end up trying out a nug from a jar that was @ 58%RH. It was ROCK HARD, crystallized and smoked incredible! You can immediately feel it hit you right in the forehead, them moves through you with a tranquil relaxing stupor.
Likes
12
Share
MIMOSA by ROYAL QUEEN SEEDS Week #10 overall Week #9 Veg She's about 19 inches tall and looking good it's hot🔥 outside but she's dealing with the heat. Stay Growing!!
Likes
15
Share
@Hashy
Follow
******************************************** Week 4 Veg ******************************************** Light cycle=18/6 Light Power=67w 28% Extractor controller settings (during lights on). High temp= 26c Temp step=0c High Rh= 65% Rh step=0% Speed max=10 Speed min=1 Extractor controller settings (during lights off). High temp= 20c Temp step=0c High Rh= 65% Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=5.00am Radiator on= -19.0c Radiator off=+19.5c Smart controller settings (during lights off). Lights off=11.00pm Radiator on=-18.0c Radiator off=+18.5c VPD aim=0.8-1.1 DLI aim=19-25 EC aim=0.8-1.5 PH aim=6.0-6.5 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 NPK= 15-5-10 Method= Manually Feed= Veg nutes Neutralise=0.1ml/L Katana Roots=0.2ml/L Plagron grow=5ml/L Easy Ph down=0ml/L (1ml=24 drops, 1 drop=0.04ml) Easy Ph Up=0ml/L (1ml=24 drops, each drop is 0.04ml) Ec=1.4 PH=6.0/6.1 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅1/3/25 Saturday(Day 22) 📋 📅2/3/25 Sunday(Day 23) 📋 📅3/3/25 Monday(Day 24) 📋💧1.0L Veg Nutes Ec=1.4 PH=6.1/6.0 📅4/3/25 Tuesday(Day 25) 📋 removed single fingered leaves and attached nodes, also 1st set of 3 fingered leaves. 📅5/3/25 Wednesday(Day 26) 📋H=15cm D=35cm Dli=25.3 PPFD=391 📅6/3/25 Thursday(Day 27) 📋💧2.5L Veg Nutes Ec=1.4 PH=6.1/6.0 📅7/3/25 Friday(Day 28) 📋85 days left before the competition closes. H=17cm D=33cm Dli=27.6 PPFD=426 ******************************************** Weekly roundup. 📋 I've decided to not do any real training yet, she's had the lower 1st few set of leaves removed. Today's the last day of 18/6, so tomorrow morning the lights will come on at 9.00am. If I had more time I'd have probably done some training. She's done OK this week, she looks a little overwatered but I tend to find that with this strain. Take it easy. Back soon. ********************************************
Likes
5
Share
Buds getting thicker now. Doesn’t look the best due to the overdose but is frosty and will see how she smokes.
Likes
72
Share
@BodyByVio
Follow
Beginning of week 8 and seems like a long way to go. Most of the hairs still white. Hopefully the buds will fill in more! As right now I’m planning to take it 10+ weeks. This week I will lower the CO2 slowly 50 PPM every day until I will reach 800PPM. Also I will lower the light intensity by 2% every day. This week I lowered the day temp to 79 degrees and next week I’m playing to lower it every further to 76 degrees Fahrenheit. Water temp is at 68 degrees and probably from week 9 I will lower it to 66. Beginning of week 8 TDS is at 550PPM. I sent adding the Late bloom enhancer from Current Culture! End of week 8 : lowered the TDS to 470ppm , she seems that it not eating so much nutrients anymore. She still drinking 3 gallons of water every single day.
Likes
19
Share
@Little_E
Follow
It was my first grow so I know my next crack at this strain would be much better. I didn't have too many issues or any crazy setbacks. It was smooth sailing for a while and then had some nute/deficiency issues but it was later in flower. I did move them into a bigger tent with a far better light but not until the last 3 weeks of flower. So I know I'll have to grow this again in the future and compare!
Likes
14
Share
@Rory420
Follow
Not a lot to report this week. The buds are growing well and the plants look healthy. They look bigger and better than my other 8 ball kush grows. I’m looking forward to the results.
Likes
24
Share
Hey everyone 🤗. This week you really put your energy into your growth 👍. They look beautiful, thanks also to the nutrients in Green Buzz Liquids 😍👌. Next week she will be moved to the flower tent 👍. I wish you lots of fun with the update, stay healthy and let it grow 😎 You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ You can buy this Nutrients at https://greenbuzzliquids.com/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .