Week 4

Been a good week, buds are ripening well. i have actually harvested the Candy Kush 2 this morning, will add another week for tha that harvest in a bit. Candy Kush 1 looks like she is ready, I think I will harvest her this tomorrow. Forgot to take a picture of the bubble kush, just the trichomes :) I think it needs another couple weeks, so does the fastberry. I am going to stop feeding this week and just water them. Sugar Mama will still get the regular feed.

Day 1: Plants in flower! Decreased humidity to 50 percent,top dressed soil with volcanic rock dust.water with Phd water + FFJ Day 2:Added a 400 w hps to boost growth in the tent,downside Temps are running a bit high at 27 degrees on average. Day 3 : Fed Aerated Compost Tea made with worm castings,banana peel,kelp meal and molasses.Phd before brew and post brew.Ph of 6.6 Day 4 : Plants adjusting well to Hps,noticing Buds under led only seem to less bigger.Plan to switch to Hps and add led ir for last two weeks of flower. Day 5: Added 1/4 teaspoon of mkp in non chlorinated water and fed,no flowering nutes yet. Day 6 : Watch and Wait

With the amazing good weather last week. Growth was phenomenal! Growth: Plant 1: 21cm --> 36cm in 7 days (2.1 cm a day) Plant 2: 23cm --> 47cm in 7 days (3.4 cm a day) Plant 3: 20cm --> 37cm in 7 days (2.4 cm a day) Weather: MON 9/2 22°/ 9° actual temperatures TUE 9/3 19°/ 11° Clouds breaking for some su n WED 9/4 18°/ 11° Rain at time s THU 9/5 16°/ 8° Some sun, a couple of showers FRI 9/6 19°/ 11° Periods of rain SAT 9/7 17°/ 9° Mostly cloudy, spotty showers SUN 9/8 18°/ 8° Clouds and sun, a shower

Started off the week by transplanting from solo cups to the final 5G pot. Was having some high heats in the tent this week and the purple kush was not liking it. Feeding was every other day but the amount of nutrients were different almost every day. Was having difficult still with the right amount of nutrients to feed.

Du un problem de ph dans les premiere semaine qui a retarder et ralenti la croissance , elle sen est plutot bien sorti. . Elle as bien su profiter de tout ses semaine et ses bien developper en floraison.

All ok

2 días entre servilletas y al sustrato. Aprox 12 hrs en obscuridad y se comienza el ciclo lumínico 👌👊👨‍🌾🏻

The first 7 days were good the plant is growing nicely. She just got fed for the first time with Goldleaf feterlizer. I had to raise the light higher because she is a little sensitive to the light.

Plant has shown slow but healthy growth since its arrival, LST continues and I've managed to keep the plant at the same height it was last week but now at a horizontal angle. I did up the nutes for one feed to a slightly under recommended dose but in the days following I noticed the plant looking a little 'droopy' and since she has been with me she hasnt been drinking very well so I opted to flush her for a feed, since then she has seemed very happy :) whilst drinking much better (possible nute lock was imminent). Now back down to half doseages with the exception of CalMg (to help after flush) but will be increasing them in the following days. As of next week I will be transferring her and another plant my partner is nurturing into single bucket DWC set ups. Fingers crossed I will see some hearty results for making the crossover to hydro.

Day 1 Today is the first day of flower here we go doing a water changer in 2 or 3 days will set it to 900 or so can't wait to see the first buds on my girls a lot of love in this grow Day 2 Ppm at 450 now time to change out tomorrow Day 3 have a five gallon bucket at 1500 PPM to add back during this week is the reservoir gets low. ppm's are at 1150 with a fresh change of all the water we'll see how she's doing tomorrow Day 4 had a major disaster last night went in to check everything and have an inch of water inside of the tentnot too much water drain from the pots that the roots got dry but it did sprung a leak when I change the water out I filled the buckets too high so my sealed job broke had to think on my feet put the 4 plants into DiY dwc buckets I built with their bubble inside no way of maintaining the temperature in there going to have to get some kind of a new epoxy and hopefully have the system up and running tomorrow. Day 5 all is well with the grow again completely cleaned out the system and all the buckets put the new epoxy on there and everything is leak free did another exchange what the plants back to their original pots with a slight adjustment to the placement I hope the stress of moving the girls is not going to affect my yields too much it is only day five of flower hopefully everything's smooth sailing from here on out P.s had to add the 5-gallon of 1500 PPM nute solution to the reservoir to get everything at the proper level along with some extra Cal mag and a small amount of the other nutes the PPM in the system is now at 740 Day 6 happy to say not much to report lol everything looks good 🙂 Day 7 week over

Sorry I was away for a bit. Spilt a pint of beer and then a pint of water on my laptop and had to get it repaired. Lost everything on my SSD so tryna build back. We're now in the penultimate week, i'm using Dragon Force from Shogun for a final boost before I flush next week. I have added a dehumidifier into the mix. Had some issues initially with the reservoir filling up to quick and emptying it being a pain so I attached the pipe to drain water back into the oxypot. Unfortunately I connected it badly and it leaked into the tent creating a spicy situation. I managed to mop up the water and reconnect it so it now drains correctly into the oxypot. It seems to be working. I had it set to 50% these last few days and it reduced the RH from 70% to 51%. I've now set it to 40% to try and boost that last minute resin production. Got 4 clip on fans and the airflow relatively high to keep the air as fresh and dry as possible. Had some rot on the last crop, determined to not let that happen this time. I removed the second OHS plant because it was stunted and the 2nd Morpheus plant was so large she could use the space and has done nicely. The morpheus 2 is dominating the space but has absolute monster colas so I forgive her. There's this mutant bud pictured. Wasn;t sure what was going on so after doing some research it seems it's either polyploidism or fasciation. I'm not exactly sure how to tell the difference but it looks cool as hell and I've excited to harvest, trim and smoke that badboi.

Increased Buddy to 1mm p/l. Really impressed with these nutrients so far, there's been no problems or defeciences the entire grow. All plants look happy, healthy and green. This plant is at the back of the timelapses.

Day 29: Hey everyone! Quick update: all the plants are reacting really well to the new LED lights! 🌿💡 It's amazing to see how they respond to the change in light. I'm really excited to see how they progress over the next few days. Stay tuned for more updates!" Here's what I'm thinking: I believe removing some of the larger fan leaves to allow light to reach the lower branches could be beneficial. It would encourage more even growth and better bud development throughout the plant. What's your take on this? Day 35: "Hey everyone! Update time: We defoliated the plants two days ago, and they are developing nicely. 🌿 However, we're currently facing a challenge with the temperature. During the day, it gets above 28°C for about 4-5 hours. Despite our 360 m³/h exhaust system, we can't keep the humidity high enough to offset the heat, and our humidifier isn't powerful enough. I've calculated that we need a humidifier that can evaporate 1800ml/h to maintain the tent at 60-70% humidity, which would help manage the temperature better. Does anyone have tips for a good humidifier or other methods to control the humidity and temperature? Any advice would be greatly appreciated!

Last two weeks ive been lowering down the PPM close to 0 but right now is at 842PpM And I am going to continue lowering down thru this week til closer to zero. But for the very last week I am going to apply some extra molasses and some other techniques to see what happens... And on the other hand just make sure You Follow @cannagrowersiriuz Instagram official for more

Début de 3 ème semaine. 1 d'EC dans la terre. Je commencerais à amener 1 ml de grow biobizz en milieu de 3 ème semaine pour monter à 1,3 d EC. Les plantes restent assez courtes "ramassées" car les lampes ne sont pas très hautes à 52 cm des apexs. Finissez bien l année "aussi mauvaise fut elle" essayons de la finir avec plein d espoir pour l année 2021 ! 💚💛❤️ Blessing mama Earth 🙏

One more week of nutrients then start flush:))

week intel: its time for second pruning they grew up too fast and need second pruning as below : first i remove big fan leaves and only leaves then let them rest for 1 day then the second part of pruning will get done that is removing branches based on these conditions: 1-if the branch is very low and never can make it to the top , 2- if branch is in shade even after pruning fan leaves , 3- if there are too many branches at the small space then non of them will get resources so if there is no space for branch then , they must get remove. everything is perfect! stresses : pruning big fan leaves and lower branches + a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 884 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 325 ppm - 0.6 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 213 ppm - 0.4 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : no more stresses from now on till the end and from next week i'll reduce the amount of nitrogen and calcium to below half to the end.