24.10 Aaand here we are in new flower week, plants look good, stucking up buds, middle one realy nice, other two need some time more, but today they are not thursty, no watering, wish them best 🙏🏻🤞🏻 In few days coming 1 more fan and dehumidyfier for tent and room becuse i got lot of trouble with that, hope it will come soon so i dont have problems in this stage when they flower, temperature is good always between 22-27 (night-day) Thats all from me for today 25.10 They are still not dry, does someone had same Situation in some part of flowering? They stopped grow before one week for sure, do dont know what to think!?🤔 Stucking upp 26.10 Watering with 0.8 l pro plant with nutrients with cal-mag, stucking good Dehumidifier arrived today and one more ventilator, hope it will help me to Control situation in tent, wish them luck 🙏🏻🤞🏻😊 27.10 Lokiin good, again 0.7l with nutrients and cal mag, ph 6.25 Humidity is lower for 10% but i also have fight in apartment with moist, so iam wating few days so other dehumidifaier can do the job in room also, temperature is good, new ventilator also work full gas so i hope they Will conitinue progres normaly and good 👍🏻🙏🏻🤞🏻 28.10 They look every day better and better, iam happy, still have some time to bi ticker all over, wish them luck Big gave 1.3l with cal mag,ph 6.3 Other two, half liter only from same bottel 👋🏻😁😬 Sprayed with neem oil, today they saw first time sun light🙈 29.10 Watering 1.3 l big other two not so thursty aprox. 0.8-1l with nutrients and cal mag, ph 6.4 They geting ticker 30.10 Watering 1l each with nutrients and cal mag, ph 6.3 Aaaand its end of week 3, hope new week will bring bigger buds and nicest colors , wish them luck🙏🏻👌🏻

So it looks like only one is flowering the other one looked like it was starting but then went back into veg im just going to roll with it and see what happens the one that is flowering is the one with grow dots in soil and I only add cal mag once or twice a week don’t mind other plants in pic the one that is flowering is coming along nicely though

I think everything is going well.

Topping was great ! Starting now with LST using a wire but gently don’t want to harm the plant they opened up pretty good 🙏🏽 I am increasing water by looks.

Week 17 Last week before harvest. Just let the plants ending the maturation process. Good synchronization between the different strains, selected with an approximate identical flowering period. I want harvesting all the plants at the same time. Flowers are dense, hard and thick, pretty resinous. 4 strains = 4 different smells, 4 different colors….🤩 I flushed consciously and stopped watering 4 days before the harvest day. I turned off the light during 48h, with ventilation on. All is ready for the cut. Date is programmed to the full moon period….why not…🤔 I will trim a little bit the plants before cutting and hanging them in the tent with the same ventilation cycle, no light of course…

2025-00-06 So i had to Tame my " Monstra Hermosa" because she was overgrowing the Lights /( alredy) she ot a SCROG and some HST and supercropping and i thinned out a lot The other Plant was harvested and i was soo sticky and lovely citrussy smelling- she reiminded me to silver haze- lots of sticky buds are curing.

Auto Banana Kush is growing good under the Medic Grow Mini Sun-2. She was a pain to get started, but is off and running now. I did have a minor ph swing but I corrected it over last day or two. She got her first lst today, and her root tips pruned. Thank you Medic Grow, Athena, and Weed Seeds Express. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Está semana el viernes 4 echamos te de compost aireado que lo tuvimos 24h cocinando y el sábado 5 defoliación agresiva de satélites y ramas que no le daban la luz

0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH

-

3 different phenos. Still can't believe I am having doctor greenspoon style buds on my N3. Crazy phenotype

Switched to GH flora 3 part. Playing around with flood times. The are taking up water at an exponential rate. Started with 3, 3 minute floods, up to 6, 4 minute floods and they're still drying up the puddles within an hour. Plant 1 is ahead of plant 2 by a day but it is half the size🤷‍♂️ Topped day 16. Not obvious in the photos as I had hoped but they bounced back within minutes Thank to evryone who gave their input, every little bit helps🙌 After all your suggestions, I've, backed off the light, backed off the flood time and count. We will see if these girls perk up a little more👍 Day 17 I noticed progression of what I believe to be a calcium deficiency? That's on me, forgot the calmag originally🤦‍♂️ another thing I decided to look into was the twisting of the leaves as the plant 1 is also starting to show. Could my ph be alot higher than I think? 4 gal res I added a couple ml of phosphoric acid at the start and about 1ml a day since(I didnt prep my cube as well as I should of) seems like alot to me. The system would rise from 5.3 to 6.3 throughout the day. A flood cycle doesnt seem to affect the ph, more over time. I am constantly stirring the mix and no my meter is not yet calibrated. I have ordered what I need but I'm considering calibrating with the chemicals I have and doing a res change. Good news is, they do seem a little more lifelike after implementing all your suggestions. Okay drained and rinsed my res, ro water into the tank was holding 6.97ph, good enough for the girls I go out with🤷‍♂️ gonna mix up a batch, do a top feed to waste, and see what happens. It has been nearly 24h since my last flood. Also, struggling with lows of 30% humidity sometimes. Dont know if that plays a role here. Okay something was off.. I did a top feed to waste with fresh 5.3 nutes and the runoff came out at 7.5.. so I did it again...and again...maybe a half doesnt times to each block with no change. I started to reuse the runoff as I wrote off the batch at this point. I then switched to a pump and did recirc feed to each block aprox 20 litres at a time, stopping to rebalance. Literally 100s of litres later I am stable at 5.5....going to drain rinse and refill. The interesting part is that what ever was saturated in those blocks is non conductive, the ec didnt change the entire time🤷‍♂️ Spent the next couple days recovering. Looking better now. Sardine catcher installed.

🌴WEEK 6 DAY 1 VEG🌴 As you can see after defolitating some leaves to expose lower shoots to light worked out perfectly as she back with a full canopy and most lower shoots have had chance to reach the same hieght as others along with some lst & tucking with her rapidly growing new shoots and leaves tells me shes happy but i am seing a few of symptoms allong the way which i have posted (images) below I find these odd rust looking brown marks on my plant i also had found 1 leaf that looked asif it had been eaten at with this browning close by, i belive it is not pest as i have tried to inspect as best as i can and i do not see anything but i havent checked with microscope :( but im sure its not pest related another thing along my journey that hasnt been exactly how i expected is run off, im week 6 day 1 shes growing fast and seems happy im giving 3L of water at 608ppms with a ph of 5.5 allowing the coco to slightly dry before watering again when i check my run off ppms its way lower today i gave 608ppms it came out at 180ppms WTF :( if anyone read this far if you know your stuff could you possibly help me out take a look at my photos/videos and let me know what you think of my plant.. is she looking healthy.? do you know what these small problems could be? thankyou, Lets Grow!

Here comes the first Preflower Update

Day: 42 from sprout Strain: Chill Out OG F4 Medium: Fox Farm Ocean Forest Light: Vivosun VS2000 switched to 75% Light Distance: 12 inches Watering: By hand, ~12 oz daily Nutrients: pH Perfect Advanced Nutrition Grow, Bloom, Micro 2 ml / L

Wooow 60 dias y se estan haciendo unos monstruos, lastima que no tardaran en empezar a cogollar i no se podran desarrollar mas... con tan solo 60 dias han crecido como unas campeonas brutal la genetica y muy bueno los productos de terranabis que han ayudado muchisimo en este aspecto, solo con ver las fotos ya disfrutas

Day 57 - The girls are bursting with flower....... looked abit light (the main tops looked a light green, showed signs of nutrient deficiencies), so upped the Dutch Master Gold One Flower, it's 1000 ppm now.... thinking about Defoliation... outside temperatures are middle of winter, 0oC to 20oC (32oF to 70oF) .... but typical high low is 5-15oC (40-60oF)......... surprisingly the LED's warm the tent upto 20-24oC, this is important point.... i am running the lights, 6 pm to 6 am... 12hrs lights on all night, and all day is night mode...... during the day is the highest temps of the day... and during the lowest temps, they have the light heat ....... Day 61 - I trimmed em .... this was the third defoliation..... things are starting to get sticky..... ah i'm just going to wing it.... they are 2 months (8 wks) from seed.... idk what i'm doing....... i did some serious stress bending today, and had to put afew tie downs in..... my theory is to hurt em as much as i can without killin em.... to make em harder, stronger, faster, more stressed, so they can survive anything..... grow em stronger...... the smell is zero in the home, but once i got them out for their 2 week haircut, they started producing some strong wet kisses, that were sticky and wet.... the aroma of heavenly ladies was abundant...... 😎😎 idk... this tastes so good.... it's like some kind of weird berry combo goodness.... i'm vaping vanilla custard atm and this is so good with vanilla custard.... vanilla custard kush n cookies... haha watch the video......... 😎

I guess when I topped the girls I left a little i piece of the cola on some of them so a few of the plants have extra colas growing from the main stem that was topped which is a good thing cause enjoy who doesn't like more colas! They start out looking like mutants but after a while they start looking more normal.

D31 die triebe wurden mit Klonex Mist besprüht. D32 Klonex Mist D33 pflanze wurde gegossen und Setzlinge entnommen 3 x , Topping zum zweiten mal Die Setzlinge stehen unter blühenden pflanzen etwas schattig bei 24-26*C Feuchtigkeit 70% Beim verwenden von klonex Unbedingt Handschuhe tragen Klonex enthält ein Hormon dass bei Säugetieren zu Unfruchtbarkeit führen kann.

Almost ready for the chop