Started weird and grew weird, looks great.... I really love coloured weed. Have had time to cure this so I hope I can revise it later

Havested about 90 days after seed posed. She is a kind of giant: about 1.8 Kg of buds and branches from only one plant. The buds seems a little bit dry. I hope this will be not a problem after cure.

Pretty much same as last week, I had another plant herm and kicked it out of the garden. I’m down to 16/50 seedlings that I had, but I was expecting that, which is why I did so many. Things are looking pretty good though! It does seem as if only some of the branches/colas on some of the plants were pollinated, which apparently is possible? I also started to flush the one girl that is furthest along, I’m thinking she will be ready for harvest within 1-2 weeks based on how fast she’s been progressing. Anyways looking forward to the coming weeks! Happy growing everyone 🌱

Coloqué las semillas en un vaso con agua de osmosis durante 2 días. Al segundo día empezaron a reventar y se les empezó a formar la raíz.

Cut out all the nitrogen from the Biogrow and Algamic nutes, the plants are well into the late stages of flower, expecting to be flushing later this the week, leaves are yellowing as the plants get to the end of their life, however the buds are getting to be a respectable size. I couldn't resist and had a pre-harvest taster, cut some of her bottom bud, dried and decarboxylated them in the oven, toked in my new 8" bong. Needless to say i was very happy with the results. Pleased with this strain alot so far. 12 /12 Administered the ladies a Molasses flush. 1 tsp Molasses, 8 ltrs filtered water, 2 ltrs per plant.

Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎

Some high-stress training was required. Fartbutt (the plant on the right) outgrew the container again, so I intentionally snapped the top to prevent further upward growth (I left it attached so it could still form a central cola.

All changed - all tents basically wrapped into one - the green leopard complete tent. It’s been great to get them in , the power , the light- check out the original sea of beam in the flesh. I’m looking for a commercial grow operation to try and document a commercialized version of the sea of beam - please get in touch [email protected] For the shop to get your lights / tent and the rest visit thegreenleopard.com Sea of beam is patent pending and is an absolute game changer for yield , structure , lack of variation between top and bottom bud - just a monster PAR sandwich and more. I’ve priced my products right to say hi and give you the best - for growers by growers 🙏🏼

This week I added a new controller to handle up to 8 functions. I installed a new heater, my old humidifier and some LED strips to the controller. Targeting a VPD at 1.0 day and night. Trying to keep the nutrient ppm under 900 and ph at 6.0 in the reservoirs. Ordered a second ph pen because I don’t trust my readings. Will be here by Thursday. Friday: Checked the ppm in the reservoirs and it’s at 1,000. Added more RO water with extra nitrogen to bring the ppm level down to 925. Saturday: I installed an updated AC Infinity controller 69 Pro Plus (controls 8 pieces of equipment) which allowed me to add a humidifier, corner LEDs and a heater to the controller. Overall I’m extremely impressed with this AC Infinity equipment. My VPD is within the range I want to achieve (.8-1.1). I programmed it to maintain 78 degrees and 67% humidity during the day, 73 degrees and 63% humidity at night. Charts posted also show the impact of an open tent compared to the closed environment. The heater is constantly pushing fresh air into the tent, so I don’t need to cycle the exhaust fan often. Rewired the tent again and moved the controller later that night. I mounted the controller on the wall. Added Mars Hydro UV/IR lighting to fill out all 8 slots on the controller. Sunday: I checked the ph in the reservoirs (6.8….i had filled it with 6.0 ph) and the ppm (1200 ppm…I had filled it with 900). So evaporation and possibly a mismeasurement of ph. I topped ff reservoirs with slightly stronger nutes and adjusted ph to 5.8 in the reservoirs. Poor magnesium absorption could be driving some leaf yellowing. Effective tomorrow, I’m switching over to Heads Formula which consistently feeds GH Flora series nutes at Micro (6ml/g), Bloom (9ml/g) and cal mag (3ml/g). Turned on the UV/IR lights for 3 minutes every 8 hours. I’m easing the plants up to 5 minutes every 6 hours which will provide the recommended 20 minutes of IR per day. This will help the plants stretch a little more. Monday: checked ph and ppm in reservoirs. 6.1ph and 880ppm. VPD remains stable except when I open the tent. Tuesday: checked ph (6.4) and ppm (880) in reservoirs. Added .5ml of ph down to two reservoirs. Still see slight yellowing between the veins but it’s not getting worse (might be improving). Adjusting ph down to 6.0 target might have solved this. The plants grew by 1-2” last night…..is the infrared light working already? Decided to mix up fresh nutes for the reservoirs following Heads formula. 6ml Micro and 9ml Bloom per gallon of RO water. Added 5 ml of CalMag too. Ending ppm was 1080 which is too high, so I diluted down to 880 with RO water. 6.0 ph. Wednesday: plants grew another .75 inches last night. I topped above the 5th node. Thursday: added RO water with heavy cal mag to reservoirs to increase amount of CalMag available.

4 of 6 harvested. Gone give the other two a few more days Update… all 6 are cut down

Oh us this plant is doing Great!! Winner winner!!

Per ora direi tutto ok, sembrerebbe un ottima foresta.

I am watering them a bit more than 1L f water every 2 days and allways adding nutrients, I give them Fast food + Shogun + Auto Stimulator + Calmag and 2 days after bio-bloombastic + calmag. Once every two weeks I also add bloombastic in both feedings since it is a low PK (1312, funny number though 👊😋) due to its organic procedence. The LSDs are the taller plants in the back and in the right wall of the grow tent and the ones in the center are blueberrys Overall I am very happy, LSDs are getting really mean main colas and it seems to me that they are not going to be ready this week, which is not what Barneys said but is better for me in order to get a greater harvest, and to be honest, me being a first time grower might have also played a role on the process lasting a little longer since I slightly overfed them the first week of flowering. I must also say that this is an exceptional genetic, I mean they are sooo sticky and have such a nice smell that I am crazy to try them once I finish. Also, I am going to try and get a narchotic effect on these LSDs by harvesting them when all the trichomes turn brown after a 5 day root washing

Welcome to week 22 of my grow diary. It rained at the beginning of the week. On Monday and Tuesday I only left the plant outside for half a day and when it rained I put it in the garage so that the buds wouldn't get wet. Unfortunately, in this weather there is a high risk that the flowers will start to mould. Most of the trichomes are now milky. See you next week ✌️

First week of flushing.Here is my schedule for flushing with flawless finish. First flushing is with just a LOT lot water. Second flush:watering normal with flawless finish and flush after 20/24 Hours,let it sit overnight but be careful because trichomes will go crazy,if you don’t have enough milky trichomes this method will increase the trichome production immediately the next day. Repeat this method until you are satisfied with the results but don’t go more than 12/15 days,im using flawless finish 3 times in total so use it at least twice. 24 hours flawless finish isn’t doing any damage extra than the 8 hour schedule that advanced Nutrients prefer,but after 24 hours will start to damage the plant so you need to give a good flush after using it IM USING 1.5L WATER SO 2/2.5ml flawless finish

Today is day 28th so we are at the end of week 4 and as you can see she is showing sex so I imagine next week will be the start of flower.. I've added one picture along with the video and I'm hoping and praying that the video uploads if for some reason it doesn't I'll be back to add more pictures.. I will say Zamnesia Seeds has some great genetics and the people over there are amazing.. hope everyone is having a great week and their plans you're doing great and if you need some seeds in the future check out Zamnesia Seeds for all your seeds head shop and mushroom needs.. happy growing everyone ✌️😎💨 https://www.zamnesia.com/us/authentication?SubmitCreate=1&ref=j1up85x0 day 32 I added a couple pictures and another video to show just how good she's doing.. I hope everyone's doing well as you can see this girl is.. have a great day a great week God bless and happy growing ✌️

Day 7. Mutant 3 leaf plant. Looks healthy tho. We'll see how she does. Day 13. Never had a plant like this before. Pretty cool.