Likes
5
Share
@Roxivus
Follow
Got these plants as rescues, they were infested with powdery mildew, and under a bad light cycle causing them to flower prematurely. I cleaned up the dead growth over a period of a week or so after planting them into my yard, as well as weekly misting with a milk based spray to combat the PM as they returned to vegetative growth.
Likes
13
Share
@Organic_G
Follow
Hmmm der Bro hat einiges an Trimmen vor sich wenns fertig wird 🤣 alles was denen an Dünger gegeben wurde ist reine Pisse straight aus der Blase haha
Processing
Likes
8
Share
@Max1973
Follow
Day 14 - Clay balls arrived, all looks good.... 😎 **the rust and damage on the first leaves is nothing to worry about, the ice cream container water level dropped below the root level, fixed it, but was cool to learn how fast hyrdo dmg can occur.... 👍 Day 17 - Lookin good... vid.... 👍😎👊
Processing
Likes
6
Share
@Treemos
Follow
Hi guys, sorry if I posted this week so late, but I was sooo busy! This week, I began to give two first doses of Flawless Finish, to start clean the soil (and unlock Indra from its nutrient burn). Aurora is growing really great, has a powerful smell and a white color when I get photo of her at night 😍 Indra began to grow again, after the use of Flawless Finish, the flowers are getting bigger and the smell is growing day by day, I will post her trichomes the next week! Enjoy the photos guys, and thank you all for the help :)
Likes
82
Share
Hello growmies! Welcome to week four of An Epsilon Adventure! The girls are already transitioning into flower, I will get some photos of that later in the week. Massive thanks to both Shogun and Royal Queen Seeds for sponsoring this grow. Daily Updates: ### Week 4 Day 1 11:00 16/7 Removed some lower growth. ### Week 4 Day 2 23:00 17/7 Tallest plants were showing signs of heat stress so I have raised the light about 30cm more. Unfortunately this now means the lower plants aren't getting as much light as they could, so I have put the cycle back to 20h (I may even increase it). ### Week 4 Day 3 14:00 18/7 Photographed. ### Week 4 Day 3 19:00 18/7 Fertigated 2l. Okay these girls are now starting to concern me a little on the basis that they are supposed to grow to "50-70cm". At just over 3 weeks old the shortest of these girls is 53cm, the tallest (plant 3) is now 76cm tall. The worrying thing is they do not at all look like they are slowing down and as they are just pre-flowering now, the flowering stretch hasn't even started. So I need some genuine advice here now: Do I keep the faith and hope that they don't exceed the space I have? Do I top or super crop them now? These ladies are beastly, at the end of the week I am going to take some individual videos and more photos to really try and capture how magnificently well these girls are doing. I think I may be in the process of growing the biggest Epsilon F1's so far? Exciting to find out! ### Week 4 Day 4 21:00 19/7 James has assured me they wont go much more than 85 so I am not going to mess with them. They are due a defoliation at the end of this week though. Measured each plant as follows: Plant 1: 81cm Plant 2: 75cm Plant 3: 80cm Plant 4: 67cm Plant 5: 59cm Plant 6: 58cm Might photograph later or leave until tomorrow. ### Week 4 Day 5 10:00 20/7 Photographed and measured. Plant 1: 85cm Plant 2: 79cm Plant 3: 81cm Plant 4: 71cm Plant 5: 63cm Plant 6: 63cm So they've all grown about 4cm in about 13 hours, except plant 3 - which seems to have slowed down a lot. The top of plant 3 is also the most advanced looking in terms of pistils. I forgot to take close ups of the preflowers I will do that tomorrow. I have had to raise the light again today and it is now much further away than the younger plants than I would like. So I am thinking about adding a 300w LED into my 4x4. I have another 3 inches I can raise the light on the hangers, after that I can removed the adjustable handers and tie it to the top of the tent... that'll gain me another 4 or 5 inches. If I need to go higher my only option would be to set them up without the tent which is not an option right now. Hopefully they all just stop getting taller now and focus on flowering... but my gut tells me there's more growth to come. Watch this space! ### Week 4 Day 6 15:00 21/7 Measured. Average 10cm growth 29 hours. 😳😳😲 Plant 1: 96cm Plant 2: 89cm Plant 3: 88cm Plant 4: 81cm Plant 5: 73cm Plant 6: 72cm ### Week 4 Day 6 23:00 21/7 Defoliated. Only photographed plants 1 and 2 individually as I was short on time. Some lovely pics though! ### Week 4 Day 7 15:00 22/7 Fertigated. 2l Will photograph and measure later when they've had 24h since training. ### Week 4 Day 7 23:00 22/7 Photographed and measured: Plant 1: 102cm Plant 2: 93cm Plant 3: 89cm Plant 4: 85cm Plant 5: 76cm Plant 6: 75cm Well here we are at the end of week 4 and I am quite shocked by the growth of these girls. This strain averages 50-70cm in height. We have six plants here and every one of them is taller than the average... but would you just look at plant 1? She is a giant! 102cm!! Where will she stop? Next week will see the full transition to flower and we will start to see the bud sites developing. I have no idea at this point what the heights will look like at the end of next week. This is sort of new territory really, they weren't meant to get this big! --- Thanks for reading growmies! 👊 ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pots 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Royal Queen Seeds https://www.royalqueenseeds.com Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com/en ==========
Likes
57
Share
@Zengrower
Follow
The plants are doing really well ✌️ Last week it looked like the buds growth was slowing down, but this week the buds are growing in size by the day. The strain description says the plant should be ready in 9 weeks, but as things look now it could also be 10 weeks. I don't mind though as she already looks amazing and getting better every day! The plant in the back that didn't have the purple shades is now also turning purple-ish. The resin production on both plants is more than I ever seen in previous grows. The buds and sugarleafs are sparkling every time I open the growbox, and the smell is really intense. My carbon filter is having a hard time keeping the aroma inside the GTools these last few weeks 😅 Will the Fruity Donutz will be ready by the end of the week? Stay tuned for more pictures and updates 😊😉 A final update before the plants are harvested ✌️ It's officially week 10 now, but I plan to harvest the Fruity Donutz in a day or 2. The trichomes are mostly milky but no amber ones just yet. It would be a shame to harvest these beauties before they reach their max potential. They look absolutely stunning, and I can't wait to try them. I plan to chop them down and hang them without doing any trimming, just remove the biggest leafs. They take longer to dry, but it does improve the overall taste and quality in my experience.
Likes
10
Share
Hi Dear Friends, 👨‍🌾 👩‍🌾 Responded well to topping, plant is developing good and strong! I'm expecting a lot from this legendary genetic, I'm expecting a huge production of big and strong buds!! ✅ VEGETATIVE week #7 (LAST WEEK) 30/12 SWITCH 12/12H 📅this week goes from 26/12 to 01/01.📅 💡💡💡Viparspectra XS2000 is working at 50% power. 💉🔍Fertilization schedule:🔍💉 26/12 3ml/lt TOP VEG 30/12 TOP MASS 0.2ml/L + 2.2 ml/L TOP VEG 31/12 SENSI CAL MAG EXTRA 2ml/L foliar spray WE ARE BACK!!! We are back after a little pause. We take a break because we were too busy to post high quality diaries. In the last diaries we tried to post as good as possible and we have to publish about 6 or 8 diaries (in addition to these that we will publish shortly). We opened also an educational Instagram page, we growed a lot in a short amount of time BUT, Instagram suspended our account and we lost all our posts, I was so sad and disappointed... a lot of work lost in a night.... Now we started a new grow with six awesome strains!!!!! In this diary you will see our journey with MOBY DICK by our friends Seeds Mafia, sit down and enjoy the show! We are growing in a 15L Smart Pot with Light Mix soil by BioBizz Moby Dick is a potent and productive strain that may reach a maximum of 21% THC. Although it may be grown indoors, it will yield the maximum results when grown outdoors thanks to its sativa genes that make it resilient to pests but also because it needs much light and lots of space to reach its full potential. Its flowering period is about 60 days, and when grown indoors it reaches the maturity in about 9 weeks and gives a harvest of 650 grams per m2. When grown outdoors, it is harvested in early October and may even reach 1000-1500 grams per plant. Speaking of the effects, it is a typical indica which produces a high level of relaxation with some mixed sativa effects that stimulate the brain. It also has intense and long-lasting effects. Speaking of the flavor, Moby Dick Feminized mixes the floral accents with the coniferous and woody ones and leaves a persisting spicy taste in the mouth. If you want to be high, you should definitely try this one! 💸💸💸💸💸 Here you can buy seeds of this top shelf strain: https://seedsmafia.com/en/feminized-cannabis-seeds/moby-dick-feminized.html?search_query=MOBY+DICK&results=2 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. Until now, built quality is really awesome. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was creazy fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks to Emily of Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Eleen of Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA -FANS: A)OSCILLATING FAN D.15cm 2 speeds 20w B) COMPUTER FAN Sunon DP200A – 230V 20w (Strong, reliable and quiet) C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h. High silence and reliability. 💊💉💊FEEDINGS: We used BioBizz light Mix TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾
Likes
8
Share
Welp. I honestly didn't expect this. As I have mentioned in previous posts, this plant was no longer on its own timeline, the next plant was going to decide. In addition to this, I had just done a heavy defol and put the leaves and 3 small nugs in my cannatrol. The cannatrol still had 2 days before finishing its dry, so this ended up being interrupted. In some unfortunate mishap, as shown in the pictures, my light was scheduled to turn off at 5am. The device said it did, but as you see in the graph, it stayed on until I had caught it at 12:24pm. I simply disconnected the usbc from the outlet, reconnected it, my light kicked on for a sec, then back off. I think messing with my dehumidifier lastnight glitched the system and I should've done a reset when I was done messing with it. With the stress already playing a chance at mutations, the additional light didnt help. No hurt feelings here. With the weight off the bud and the sugar leaves, my cannatrol is maxed. 2.2 lbs of wet weight is all it can take, and I am pushing that. 900 grams of wet, partially trimmed buds impressed me! Not sure the sugar leave weight. Setting cannatrol to dry for 5 days and cure for 25. I know it can go way quicker, but I read a study about these settings and want to see if it stands any truth. Smoke report and dry weight coming soon!
Likes
5
Share
@Ensign420
Follow
Greetings fellow growers 🖖 and welcome to my first grow ever. This adventure actually started several months ago when I decided to stop buying flower from dispensaries and just grow my own bud. How hard can it be!? This is actually my second seed of this strain. The first bean sadly died due to over watering (sorry girl, RIP). I was literally watering the cube to the point where water was dripping from the bottom, then heavily sprayed the humidity dome and tray with the vents completely closed. Everyday. Multiple times. I never let the dome or try dry out. So after about 8 days of not sprouting, there was a funky smell of rot. So that was that. Later I learned that rockwool retains a lot of water and can easily drown seeds. So a wet/dry cycle is best for rockwool germination. So even after hours of researching and digging through forums and tutorial videos, I was still under prepared for this journey. Did not consider how delicate the germination phase is. Oh well. Lesson learned. Reset and try again! I hope everyone is safe and stoned during this corona crisis. Just like everyone else in the world, I want this pandemic to be over with. But in the meantime, let's grow some weed! 🖖 [START OF WEEK 01] Day 01 - Monday - 08/03/20 - Total Days: 001 ----------------------------------- - [0830]: Light Schedule: 24Hrs/0 --- Soaked cube in 5.5 PH water for 10 min. Did not shake water out. --- NO NUTES! Only PH'd down to control the PH levels. --- Did not use the default hole (way too deep). --- Flipped cube upside down and made a shallow hole for the seed (less than 0.25" deep). --- Placed seed in and pinched hole close. No additional water added. --- Sprayed the tray and dome with straight water (5.5 PH). --- Vents are cracked opened a for ventilation (about 1/4 opened each). --- Distance between the light and tray was 53" --- AC was set to 80 °F --- Exhaust fan was set to 86 °F --- Room average temp was at 85 °F --- Dome humidity was at 85-99% when sprayed. --- Allowing to completely dry before respraying. - [2200]: Dome and tray were completely dry! Sprayed only tray and dome with more water. Day 02 - Tuesday - 08/04/20 - Total Days: 002 ----------------------------------- - [0845]: Sprayed dome and tray in the morning. Everything was dry. --- Hoping for the best! - [2130]: Everything was dry again, so sprayed dome and tray at night along with a light spray on the cube. Day 03 - Wednesday - 08/05/20 - Total Days: 003 ----------------------------------- - [0830]: Everything was dry again. Resprayed dome and tray. Slightly sprayed cube. - [2125]: Hooo damn!! She popped! Am little stub is visible! Resprayed dome and tray again. --- Still going 24/0 for lights. - [+0033]: Just checked up on her and I swear she grew a bit taller! Getting excited! Day 04 - Thursday - 08/06/20 - Total Days: 004 ----------------------------------- - [0845]: Wow! Went from a little stub to fully sprouted overnight! Everything was pretty dry again so resprayed dome and tray. - [2200]: Tap root is visible! Over 1" long too! Just resprayed dome and tray again. -- Going to prep for hydroton transplant tomorrow! Day 05 - Friday - 08/07/20 - Total Days: 005 ----------------------------------- - [0930]: She keeps growing! -- Added a bit of CalMag to the spray bottle (8 drops to 650ml of distilled water). Resprayed dome and tray. Water was at a 5.4 PH with 141 PPM. - [1045]: Prepped the bubble bucket with 4.5gal of water. Water is high enough to reach about 0.25" above the bottom of the net pot. --- Added 3 drops of Superthrive --- Added 3.5ml of CaliMagic --- Added 2ml Hydroguard --- Then PH'd down to 5.6 --- Solution Strengh: 120 PPM --- Water chiller is set to 20 °C - [1100]: Transplant time! --- Filled the net basket 1/3 with hydroton. When placed in the bucket, air bubbles are not visible, but are slightly below the surface (slight digging will reveal the water/bubbles below). --- Removed plastic on rockwool cube and placed in basket, then filled around and covered with hydroton. Making sure to block any light from passing through the net pot and into the nutrient solution. --- Covered with a half-bottle dome sprayed with the CalMag water from earlier. --- Hoping for the best! - [1300]: Raised Bucket 5" higher. Now light distance is 48" to top of bucket. - [1820]: Lowered tent exhaust temp to 76 °F --- Lowered AC to 75 °F --- Raised bucket even higher so light distance is 30" to top of bucket. - [2300]: Looking good! --- Sprayed dome and surrounding hydroton with more CalMag water. --- Attached timer to light! So new 18 Hrs On/6 Hrs Off light schedule. --- Lights On: [1600] (4pm) --- Lights Off: [+1000] (10am the next day) --- Decided to go with lights on during the evening/night and off during the later mornings/afternoon (the hottest part of the day) to see if temps can be controlled better. --- Please survive girl! Day 06 - Saturday - 08/08/20 - Total Days: 006 ----------------------------------- - [0800]: Everything was dry. Resprayed hydroton and dome. - [2000]: Here first night cycle seemed to go well! Get'n taller! --- Dry again. Removed the dome. --- PH went up to 6.5 so PH'd down to 5.7 --- Ran the top feed drip ring for a bout a minute to wet the hydroton and rockwool with the nutient solution. ---Too scared to leave the top feed on 24hrs (I don't want over water her and cause dampening-off). Will let dry before re-watering. - [2100]: After closer inspection, I think she's looking a bit yellow. --- Decided to add a bit of grow nutes to the bubbler solution. --- Added 2ml of Sensi Grow A --- Added 2ml of Sensi Grow B --- Solution strength after adding more nutes: 176 PPM --- PH went up to 6 --- I hope that the extra chelating properties of the 'PH Perfect' solution is enough of a buffer for proper nutrient uptake. Day 07 - Sunday - 08/09/20 - Total Days: 007 ----------------------------------- - [0800]: Water dropped a bit (mostly due to evaporation) so solution strength was at 190. --- Checked PH again. Was still at 6, so PH'd down to 5.4 --- Ran the top feed for a minute to wet the hydroton a bit. - [0915]: Since she's looking perky but still a bit yellow. So decided to up the nutrient concentration even more before lights out. --- Added 2ml more of Sensi Grow A --- Added 2ml more of Sensi Grow B --- Solution strength after adding more nutes: 199 PPM --- PH went up to 5.8 - [1700]: Checked nutrients. --- PH: 5.9 --- Solution strength: 202 PPM --- Added 4ml of Voodoo Juice --- Added 4ml of B-52 --- PH after adding more nutes: 5.9 --- Solution strength after adding more nutes: 238 PPM - [2130]: Decided to make a new foliar spray to address the continued yellowing. --- Started with 500ml of distilled water. --- Added 3 drops of CaliMagic --- Added 3 drops of Sensi Grow A --- Added 3 drops of Sensi Grow B --- Added 3 drops of B-52 --- Added 1 drop of Superthrive --- Solution strength: 164 PPM --- PH was at 5.9 and did not adjust. --- Gave her one spray. --- Also sprayed the surrounding hydroton. [END OF WEEK 01]
Likes
7
Share
First week of flower growth for the older ones, younger ones are still sort of finishing stretch (4 day difference). Plants got much taller than I expected, especially the one which started out extremely weak with very messed up leaves, which is around 2 feet at the moment. I remember weeks 3 and 4 I was butthurt like “why are they so small :,(“ LOL, if only I knew. Now I’m having to actually move my light up! Past few weeks most of the new growth has been growing in with yellow tips, still haven’t figured out why. Don’t think it’s nute burn cause I’m barely pushing 800, could definitely be wrong though I’m too new to this. Otherwise they’re completely healthy, consistently standing right back up immediately after I train them whether it’s LST or even HST. Humidity is beginning to become a problem, which I was not prepared for. The paint in the closet is beginning to crack and bubble off so I will most likely have to go in there scrape it and re prime and paint it myself eventually. Ordered a small dehumidifier on Amazon because I’m on a budget, that was a mistake. It pulls about a quarter pint out per day -_- wasn’t trying to spend 150+ on a new one so I found a 25 pint on Craigslist for 40 bucks, it should work, picking it up later today. Edit: dehumidifier is up and running and works perfectly, rh now at a steady 50. Leaving on a trip for a month in December so I will unfortunately be forced to harvest at 12 weeks, really hoping they will be close to done by then. But yeah, still having fun tending to these awesome organisms!
Likes
13
Share
@Rob691
Follow
Here we go for the first session. Hope it will be as easy as the first one was... finger crossed ! As I love sativas strains, Chocolate Haze seems a perfect choice to me. The grow tent in tall (2m) so the girls can grow till 1.6m more or less. With some training and topping, it should be ok. Germination day 5 : 2/3. I decided to put a 4th Chocolate seed. If it germinates, it will be just 5 days younger. Nothing I can't deal with ! If it doesn't, never mind. Let's give it a try ! Germination day 9 : 4/4 ! Now it means that I have to deal with 7 pure sativas in 1m2…. I love chalenges 😁😅 Germination day 12 : The litle girls are growing gently. The second pair of leaves is coming, and I thing I'll turn diary into "week 1" on saturday with their first repotting. The 4th Chocolate haze is a bit small for repotting as she's 5 days late compared to the others. But, she grows fast and strong (maybe faster than the 3 others) and I think she'll make it ! We'll see.
Likes
26
Share
@561honda
Follow
Chimera was 🔥 I got 8oz and a 1/2 . 4oz from the more purple leafs one and the least purple leafs had 4 and 1/2oz and i broke one top main branch by accident .Had 50 grams of sugar leaves and 100 grams of regular fan leaves ! Made 100g of regular fan leaves to 1 stick of butter and was night night i didnt think it would work but it actually did !! 😆 The more purple one smells and taste fruity and sweet and the other less purple was smelling like gas and now smells and taste like straight lemon 🍋!!⛽️ 🔥 💣 Next grow will be 12 clones in 2 gallon square pots in 100% coco and automatic watering every 6hrs and switching from Fox Farm to Athena blended nutes and see what happens !!!! 😆
Likes
4
Share
These ladies are doing mighty fine! The smell is unreal! Almost like walking into a candy shop! The color, cannot be better. I do have 3 purple phenos and 2 green. But even the green phenos have alot of purple. Gonna be a some beautiful stuff to say the least. Noticing some minor foxtailing on one, has ro be genetic. The environment is on point. Intoduced Big bud supplement to them this week, and they seem to love it so far..
Processing
Likes
28
Share
The green crack has reached day 57, and its not bad for how old itis! Im hoping the buds will dense up over the next 2 weeks. I dont know when im going to start flushing but should be sometime next week.
Likes
Comments
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.
Likes
18
Share
~ FASTBUDS TESTER #2206 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/29- Here we go into Week One of Flower! It's been a month since these pretty ladies popped out of the ground and they're both looking perfect and have pistils popping out everywhere! Their fabric pots were still heavy when lifted, and they looked happy, so I skipped watering today and will check them tomorrow morning after the lights come on. Since being topped roughly a week ago, they have two new shoots that are emerging and looking extremely healthy with excellent vigor and have a beautiful healthy green color! The #1 is now at 9" tall and the #2 a bit shorter at 7". 12/31- Today was a 'dry day and all I did was refill the humidifier and some canopy maintenance, tucking shade leaves and gently bending branches. It's been a little over four weeks since they were planted in their amended medium and it's time to give their microbes a good feed so they can continue to provide them with all the macro and micro nutrients they need so, yesterday they got a good watering with 0.5g of de-chlorinated water with GreenGro's Veg, Flower, Green Aminos, Natures Brix and Granular Myco added to it @ 1.5 tsp/g and then ph'd to 6.4 @ 73℉. 01/02- Today I watered them from the bottom with 0.5g of de-chlorinated water to which I added 3ml/g of Earth Juice OilyCann cal-mag to prevent any Cal-Mag issues they may encounter before they arrive. I also have the HLG 650R set 36" above canopy and it's set at 60% power which is being controlled by a Trolmaster HydroX controller. The tent environment is on point with temp's running 70 when the light's off and 74℉ with the light on. I'm keeping the RH at 55-60% right now but will drop it as flowering progresses. Finally, I've been keeping the VPD in the tent running 0.85 - 1.05 which I'm happy with! 01/04- They have both been doing really well getting watered every other day and yesterday they received 0.5g each of de-chlorinated water with 3ml/g of Fish Head Farms Fish Sh!t Soil Conditioner which was then ph'd to 6.3 @ 72℉. They're both doing fantastic but were really beginning to get choked up with growth so I went in and selectively removed a few shade leaves from both to get some light penetration down into their canopies to give that lower growth some much needed light. While I was doing that I also did a little more LST on both to also increase light penetration. Well, there goes another week in our journey and I'm looking forward to the coming weeks as flowering gets cranked up! 😍👍 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙