2.08 A week with CO2 and good environment conditions. This growth rate is insane. Some of them suffered transplant shock. Cheers 💚

Jeht's Getz Loss !!

this week I did the top pruning to increase the production of the lower shoots to serve as clones when they are put to flower

- Week 3 of flower Unfortunately, one of the collie man kush got hermies. So I sadly had to remove that one from the grow tent. The 4 remaining plants do have more space now. I still have some deficiencies I calibrated my ph and ec meter, and they where of by - 0.3 ec and + 0.1 ph. I gave them advanced nutrients revive from the top, also to check the run off. The run of was 1.4 ec and 6.5 ph, so i adjusted it now in the water tank to 1.6 ec. Hope they will respond good to it and the grow can continue.

We got life and two are getting closer I’ll use this diaries for one only

I pulled a few top fan leaves to get to limit the stretch. All good and looking happy.

Did some low stress training on the GC again. My Clone rooted and received a 15 L autopot, flipping to flower next week on the 3th to 4th June once the clone has some decent rooting, Reservoir running with 3.0 EC and PH 5.9. Plan for the next days: Dryback into irrigation Phase before i switch to flower next week in order to prevent salt buildups and a fair usage of already applied nutrients from the Reservoir.

Things are going good, I am beginning to think about when to harvest. I have tried capturing some microscope shots of the trichomes with a 15x macro lens (BlitzWolf), but they turned out awful. They still look transparent and glasslike, and I did not see many, if any, amber trichomes. I am going on vacation next week, and wonder if plant will be fine with not being harvested before the 8th of July, two weeks from now. Day 3: Watered Day 4: Macro shots. Trichomes look transparent and glasslike, but since this is my first grow, any input from experienced growers is very welcome :-) Day 7: Watered. No amber trichomes in sight, I will wait one more week before the harvest.

Great week 4 for my 2 lovely Papaya Sherbet

420Fastbuds Gelato Auto Week 3 What up grow fam. Weekly update for these three beautiful girls. All are growing absolutely amazing. Showing no signs of any issues at all. I'll introduce nutes this week using General Hydroponics Flora 3 part flora series. Will continue the same routine as they seem to be responding great. All in all Happy Growing

Week 2 started off rough as the hot sun and lack of water caused her to fall over. I watered her last night and she’s back up today. Another week of just sun and water. It’s a rainy week so got some humidity in the air

Last week I didn't have time to make an entry. But this week here I am, and with a video! The main stem and primaries are thick as f***. The bush has become monstrous but I manage to get airflow underneath the plant as well. Tied some of the main branches in the last week, but no more tying as it gets much bushy. As the fan leaves are huge and leaning down around the pot, added some side support to raise the sides so the air can go underneath the canopy. I'm tucking less as I think of switching to 12/12 in a week. I raised the lights but got less increase in height than the raised amount. I am not thinking on defoliation of any kind as I do not like taking living leaves away from the plant. But if it is too important and I am missing A LOT by not defoliating the lower leaves, please comment with detailed suggestions so I can apply them. But the leaves are very healthy, so I don't want to take any of them away. Now I have 6 white, 4 yellow bulbs and a 45w white cfl. But during flower, I plant on changing the white cfl to 32w yellow, and ad 2 more yellow bulbs. In total it will add up to 180w (18000 Lumens from the leds, 6 white 6 yellow) and 2250 lumens from the yelllow CFL. Maybe ı will add a second 32w yellow cfl mid flower. Thanks for reading, and may all plants on earth thrive at least as this guy!

they do not seem mileage even after a week of fertilization even if at very low dosages the next time I increase the nutrients and let's see what happens Days 41 it looks like it's going well they still look nutrient deficient the next time we increase the dosage.

🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚

So this final week the buds on this Orange Hill Special are filling out. They are getting rock solid and the calyxes are doing their final swelling. Also, the trichomes have started forming and up close, they are forming a white sticky film over the whole bud. The buds feel heavy and compact, although their size could have been bigger but not complaining with this amount of bud. I have just been feeding some perma tea and clean water since this soil is probably very high in nutes by now. I had some brown leaf points so just adjusted and all was fine. Now we go into the final one or two weeks. I did some final defoliation to expose some underside buds, they are swelling too. Removed some sticky underside larf, kept it in a box to gradually dry for a preliminary taste test coming days. Sunshine and me wish you a very merry Christmas (check our Christmas video) and hope we have more freedom next year instead of less and wish you all bountiful harvests! Special thanks and well wishes to @MarsHydroLED, you gave us an excellent gift that keeps on giving, thank you!!

Day 15 ready for the transplant tomorrow. Just watered each with 1/3 cup of water. It was the first watering since the initial one 15 days ago. My basement is very humid. All 4 are growing pretty strong. The 2 on the left and right are the Guavo Autos and the other 2 are Sticky Soul Photos. They will continue their life outside starting tomorrow. Day 16 and all 4 plants have been transplanted into their final 3 gallon pots. What I did was water each cup yesterday with 1/3 cup of water. Today I drilled some holes in the 3 gallon pots. I filled it with a small amount of build a soil light mix and the rest with happy frog. I poured 2 cups of water into the new soil. I made a hole. I added 2tbspns of Mykos to each pot. I slid the plants out of the cups into the hole. I watered those in with 3 cups of water each. A little ran off through the bottom. I’m going to keep them in the shade for a few days then toss them in the sun. Stay tuned! Day 20 and we are looking really good. Check the video above.

Tag 26: Ich beginne mit LST.

week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.

🥊 🍼Greenhouse Feeding BioGrow & Bio Enhancer ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱 FASTBUDS 420