out of 5 seedlings 1 was yellow from day 1. all of them were germinated the same and have been treated the same as the other 4. any feedback would be great

Room is almost there Flood table coating was completed this week. Took forever to cure in the colder weather, but it is looking great now. Normally I wouldnt use this stuff because it is $200 per gallon, but since Im in the industry, these expired sample cans didnt cost me a cent and provides a much more durable, reflective, cleanable and puncture resistant alternative to plastic. Im very happy with the table overall, it cost me very little to build I installed the fan and carbon filter, moves about 750 cf per minute. Its a bit loud, but its huge, so what are ya gonna do? My dutch bucket pails are slowly being collected from my local coffee shop. I need 4 - 8 more. Ive got all the hardware to set up the watering system, so I will work on that in the coming week

Welcome to week 6 of my Sour Betty by Anesia Seeds diary Plant looks good, we had a bit of moisture (rh) problem, but opening some holes in the tent fixed it ;) Strong sidebranches which seem difficult to lst, maybe i will have to apply some hst, time will tell... Hope you like the footage ;)

These two did great even through a lil stress they still came out on top. I almost want to run it back but I think it's time for something fruity maybe, maybe having a terpene profile that helps initiate a more stone heavy affect and be indica heavy.

the sun appeared in the middle of this week:) willow !!!! The girl can be seen enjoying her every ray:) I think in a few days, she will start to bloom :) she is not big, but she still has some time to grow :).

2/23: The Black Jacks and Gorilla Girls are finally ripe and ready! I'll let them go til Thursday and move them into the dark.😃

Beginning of week 3. Great development good healthy color.

First seed did pop but didn't do much after that. Second seed did good.

I start by saying that the genetics of this fantastic and super plant, the only exemplary because I was given after ordering, the first time I cultivated this variety .. I never had any problem from germination at the end of harvest, made grow for 6 weeks approximately with light hours 18/6, then kept in bloom for 10 weeks ...... and from about 10 days to dry with temperatures between 19/20 degrees, and humidity rate to 50% between today and tomorrow I'll make a nice manicure.

I'm super bummed about the nutrient burn on her but I think the buds look pretty good in spite of this.

Me sorprende como van engordando súper rápido y la formación de resina es sorprendente. Están demostrando unos tonos muy hermosos ,se puede apreciar que van a ser cogollos grandes y compactos .

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Esquejés

Big cracked on the main cola of plant #4 not dying but very fragile. She will be okay I think. Update : 22/08 Mealybug, so far I see only 1 found some info from Google this can be a problem with infestation Treatment : I clean off the stem area with water mix with drop of alcohol and washing liquid.

All smooth sailing trust me she is 💯 packing on weight like right now the branches are hanging lower well was I had to adjust the tie lol she's is super heavy, I plan to do a video of me disconnecting the support to see what if she wasn't supported 😁 should I? Stay tuned 🔥

Growing beautifully

FBT 2401 is starting to stack. She is not gonna get really big due to my errors. I will get a nice sample of the flower for sure. Everything is looking good now. Thank you Medic Grow, Athena, and Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419

At this point you can see all the bud sites they aren’t putting on weight yet but they are starting to smell

Both plant are doing well for the lil that is being done....going to take one or two cutting in the upcoming week so they can live up to the mothership name n allow more vertical branches