Week 3, first nutrient treatment

Small But Fearless 🌱💥 Divine Seeds Competition V2.0 Here we go! The first week is done and my Auto Pablo Escobar is already showing signs of a strong and determined character. 😎🌿 After sprouting well in her Jiffy, she was carefully moved into a 20L fabric pot, where she’ll have plenty of room to grow and show off. 💪 I added mycorrhiza directly at the transplant site to give her roots a boost, and she’s already pushing her second set of true leaves. Structure looks compact and promising—definitely one to watch closely. 👀 Here’s what went into her care this week: 🔸 Transplanted to 20L fabric pot 🔸 Mycorrhiza added to the root zone 🔸 Watered twice with BioBizz RootJuice for smooth rooting 🔸 pH adjusted to 6.5 I’m keeping her environment stable and stress-free, and she’s responding beautifully so far. Starting next week, she’ll also get some compost tea to support early microbial activity and strengthen her base. Let’s see where this one goes—Auto Pablo looks like she’s got plans! 🔥🌿

Im really pleased with how these girls are turning out, i was worried at 1st as the propagation tent they were in wasnt big enough to get good air flow so they were very small but as soon as i got them into the Homebox triangle tent that all changed and they are looking great. Fantastic strains and genetics by Anesia Seeds.

week intel: we reached the peak of flowering stage and need to cause a little more e.c stress from this week so e.c stress is twice a week i reduced the amount of Nitrogen and calcium and stopped feeding silicate in other hand i raised the amount of base nutrient and booster short story version: more K & P - less N stresses : a little E.C stress around 1 and 1.2 twice a week from this week feeding: i feed them 3 times this week with this order : day 1 : i feed them high with base nutrients(calcium & micros (half dose) + Bloom) about 566 ppm - 1.1 e.c to cause a little stress. day 3 : i feed them low dose of Top-Max + B-52 around 392 ppm - 0.7 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them high dose of Feeding Booster around 630 ppm - 1.2 e.c to cause e.c stress again guide of the week : e.c stress if done correctly is one of the very few ways to increase quality in all aspects ( color , aroma , taste , bud structure , resin contents ) but if you over do it , listen carefully brother : it can reduce quality in every aspect so always look for signs and never reach the red line

Day 1- watered Day 2- 😴 Day 3- 😴 Day 4- I need to feed tent 1 tomorrow. Gonna up the nutes from last week since they dont seem to be getting caught up. Can see 1st signs of flowering so I'm gonna experiment a bit with additives and see if I can see a noticeable winner or possibly no difference at all. Day 5- Fed tent#1 14ml advanced trio, 1ml floralicous +, .6ml mammoth p. 1/8tsp flower fuel per/gal. Tent#2 got 2.5ml armor si, 5ml tiger bloom, .6ml mammoth p/gal. Pulled each plant out and cleaned up the bottoms and middles, washed trays and gave a very light dusting diatomaceous earth on underside of leaves. Hoping that will keep any spider mites that think fucking with me again this year will be fun, dead as shit and disappointed. Got a bunch of cuts for clones now too. That's gonna be tomorrow me's problem though lol. Day 6- 🚫 Day 7- well I'll be a son of a bitch...guess what I found? Spider mites. Got to try out my new eradication method I thought up months ago using diatomaceous earth and an air compressor. (Almost a week later and I cant find a mite anywhere 😁) STEP 1- Turn off your carbon filter so u dont plug it up then dust the hell out of everything with diatomaceous earth. I wanted it to look like a thick fog and let the fans blow it all around. I'd go fog it back up every 10-15 minutes for an hr or so. STEP 2- Starting with the worst, pull each plant out of the tent and blow off with 60psi (4bar) compressed air(see video) STEP 3- Inspect the plant and blow off any mites u find with the air gun. I used a LED flashlight to make it easy to see them. STEP 4- After the plant appears mite free give another dusting of diatomaceous earth.(see video) STEP 5- clean tent. Vacuum up all the DE and blow dust out of lights. STEP 6- Put plants back in the tent and start your carbon filter if u have 1. In theory this should take care of current mites and any eggs that hatch. Check daily and repeat steps 2-4 as necessary.

Semana 13: 31dez - 6janeiro Quase perto do fim!

Defoled Topped LST13 april Photos Beforie/Arter

For LIQUIDS ******GREEN BUZZ LIQUIDS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter. 🌱 ‘god’s gift’ growing for the second time

12/9: Fed today...I feel better and my plants are looking better....whew! 12/10: Will switch to 12/12 tonight. and turn on the extra reds. Will also begin UVB stressing immediately. 12/11: Flipped to flower. 12/12: Fed today and sprayed with boom boom spray and axiom harpin proteins. I also added a tablespoon of Happy Frog Cavern Culture to the pots before watering it in. Got the DIY CO2 generator going with a fresh batch of sugar and yeast. 12/16: Fed today. Good week in the garden...plants are looking great...stretching has commenced.

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Girls keep growing on this last veg week. 💪 Continuing Defoliation, lst, preparing scrog and daily fighting with this big leaves 😅 🕑 I've removed 3x 2h 💡 during the week, now 12/12. 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1.5 l Water + Roots + Grow + Zym + Sugar Royal (1 + 4 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 43% 43 cm Mars Hydro Fan kit Setting 4 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Gorilla Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/gorilla-cookies-fast-flowering

First week under the Lumatek 600 Pro set to 50% and aporox 40cm away from canopy. Day 7 applied some pruning and supercropped the few taller girls to even out the canopy. I will add a CO2 bag next week as i increase the power to avoid potential light stress.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 4 since time change to 12/12 h. Hey everyone ☺️. 4 days ago she was placed in the flowering tent. Thanks to the training it has become very bushy :-). 1 g Enhancer Pro l cocos was added. As always, a cuttings were cut before moving 👍. Otherwise everything was cleaned and checked. Have fun and stay healthy 🙏🏻 You can buy this Strain at https://www.amsterdamgenetics.com/product/super-silver-haze/ Type: Super Silver Haze ☝️🏼 Genetics: Haze x Skunk #1 x Northern Lights Type: 70% Sativa – 30% Indica 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Tea once a week going nice;)))))

~~13JUN18 - 19JUN18~~ Not to much changed this week just waiting for the flower to be ready. Did a lot of prepping for the next run. They are all stretched out and topped so they just grow up. Lots of space so light and go through easily. They will be getting the Advance line-up, Stay tune and see my second run. Harvested - 19JUN18 (D+62)

Week 11 (10-4 to 16-4) 10-4 Temperature: 24.4 degrees (lights on) 21.1 degrees (lights off) Humidity: 60% (highest) 52% (lowest) No pictures. Added 10L to the reservoir, and turned it on for a couple of minutes. 11-4 Temperature: 24.4 degrees (lights on) 21 degrees (lights off) Humidity: 61% (highest) 52% (lowest) 12-4 Temperature: 25.5 degrees (lights on) 22 degrees (lights off) Humidity: 65% (highest) 57% (lowest) Turned the reservoir on for a couple of minutes. 13-4 Temperature: 26.5 degrees (lights on) 23 degrees (lights off) Humidity: 65% (highest) 56% (lowest) 14-4 Temperature: 26.4 degrees (lights on) 22.1 degrees (lights off) Humidity: 64% (highest) 45% (lowest) Turned the reservoir on for a couple of minutes. The reservoir is almost empty, there is 850 ml left. 15-4 Temperature: 24.4 degrees (lights on) 20 degrees (lights off) Humidity: 59% (highest) 49% (lowest) No pictures. 16-4 Temperature: 23.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 60% (highest) 53% (lowest) Today i defoliated both plants heavily for the last time, you can say i did a method called: schwazzing. Turned on the reservoir for a couple of minutes. (Till the AutoPots are full and the valve closes) Rised the pots aswell, so the canopy is very even. I let them recover from the heavy defoliation i did, and next week i will slowly increase the light's strength. (Now still at 50% 50cm)

Hi guys, What's up? Welcome back to Queen Peaky's Flower Gardens These strawberries have a very strong smell....one of the two phenotypes seems to be sativa-dominant.... Very good ... let them cook in the oven for a while longer 👊

Day 71 - Starting week 11 and overall looking good still but have a ton of bracts/calyx that are not throwing out pistils. They seem to slowly be coming out on some but looking like I’ve got a ton of them without pistils and no buds actually forming, not sure if I’m explaining it right, all still fairly new to me. The only thing I can think to do is just let it ride for awhile longer and see what happens. Day 73 - Looks like a few more bracts/calyx’s are starting to open and show more pistils. Some have thrown out a single pistil and started to shrivel already. She’s got a lot of milky trichs but still think she’s got a good couple of weeks left, hopefully she’ll fatten up quite a bit. Ended up giving her a gallon and a half of plain pH’d water today as well. Not sure why I didn’t research or why I didn’t think of it but she’s definitely foxtailing so hopefully cutting off one light will help slow it down a bit or something. She’s nice and frosty and stinky so not too worried about any ill effects from it but still not happy. I’m sure a combination of lights, a little heat and a screw up somewhere on my part stressed her out too much. Oh well, every grow is different and is a learning experience. Day 74 - Still chugging along and even though she’s foxtailing, she’s starting to open up more and throw pistils. Other than that, not much else happening with her. Day 76 - She’s still chugging along and not much to really update today. I know she’s foxtailing quite a bit but just letting her go to try and get as fat as she can. Still a lot of clear trichs and bright white pistils so a bit of time still left. She’ll need some water tomorrow for sure. Day 77 - The end of week 11 and I’m probably gonna give her another week then possibly chop. She is just about all milky and just don’t see her fattening up much more. I did give her one more round of nutes today but that’ll be it until the end and just straight water from her on out. If I see some fattening up, then may let her go longer. I may possibly do a partial chop and then see what happens with the lower stuff.