Hi everyone 🤗 This week it looked more and more astonishing after opening the box a wonderful sweet smell wafts through the room 👍. A few days ago the Blue Cheese Phenotype 1 was harvested and placed in the dark room :-). This week both Kosher Tangie Kush phenotypes will be harvested 👍. Next week the Blue Cheese phenotypes 1 and 2 will be harvested ;-) everyone else needs a while 😀. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱👍

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Ooooooweeeeeee they’re all doing so good even the extras that I threw in flower with out cloning are doing great .. in just 2 more weeks I’ll throw the donor plants into flower

Day 78. Girls are my pride and joy ! Everything going well, even supercroped branches are recovered well and hopefully i will push that grow to the end without any hiccups ;))) One Kalini Asia shows some potency for funky colours ! Maybe will defoliate at the end of this week or at the beginning of next one ... Hope everything will go smooth .. Day 82. Happy 420 !!!! And for me it really HAPPY !!! Just check todays video .... My best run, no doubts !!! Happy Growing !

Harvest Update – RUNTZ Both RUNTZ phenos have been harvested, officially bringing this incredible journey to the end. It was a grow full of satisfaction, learning, and beautiful results. I’m truly impressed with the genetics from Zamesia both plants delivered super dense, frosty buds with an absolutely insane sweet and candy-like aroma. The terpene profile on these girls is just mouthwatering and promises a top-tier experience in the vaporizer. Solid, rock-hard nugs on both phenos this strain really lives up to the hype! Special shoutout to Plagron and their product Green Sensation – it worked wonders, especially in the final stages. I’m convinced it helped push the trichome production and aroma to the next level. 🔥 Thank you to everyone following this grow and to the contest organizers for the motivation and great vibes. Stay tuned – and keep growing 🌱

Switching nutrients to "Mid Bloom" ratios as of Sunday (I've been starting and ending my weeks on Thursday, so this is like a half week of early, half week of mid).

Flowering strong on day 40, trichomes looking good

Hi, Topman! Today is 30 days of blooms! We are done defoliations and adding Delta9 6ml/l. The next week we are adding YV BOOSTERS. Comeing soon

🌾 Harvest Day — The Grand Finale of the Eternity Grow Cup 🌾 Days 72–73 | Trimmed on May 25 | Posted May 27 What a journey this has been — and what a finish. These five incredible Runtz phenos have now completed their cycle, and today, we celebrate the final stage of their flowering life: the Harvest. We sent the girls into darkness on Day 70, allowing them a full 48+ hours of rest and reset. The dark period was just a bit longer, truth be told, because time… it flows as it must. This extended dark time helps increase resin production, allowing the trichomes to mature just that final bit more. On Days 72 and 73, we harvested them with care and reverence. Each plant was hung upside down, whole, in a perfectly controlled 60% humidity environment for 13 full days. Before hanging, we gently removed only the fan leaves, leaving all trichome-rich sugar leaves in place — a natural armor for the delicate resin glands during drying. Why do we do this? Because those sugar leaves help protect the essential oils and terpenes, preserving potency, flavor, and aroma for the smoothest experience later on. 🌿 The Dry Room & The Trichome Guardians Throughout the drying, we used a moisture meter to monitor the moisture content in the stems. Once it dropped to around 12–13%, we knew it was time. This tool is a simple but game-changing ally in ensuring a perfect dry — not too fast, not too slow. We then trimmed everything by hand over a 6.5-hour focused session. Armed with trim bins and good energy, we collected an abundance of glistening trichome heads in the process — a golden bonus from these resin-packed beauties. The leaves themselves told a story: deep purples, near-black shades, autumn fades and metallic tones — just stunning. Each girl was trimmed in order: #5 → #4 → #3 → #2 → #1, revealing dense, chunky buds all the way from top to bottom. Not a single pop-corn bud among them — only rock-solid nugs, heavyweight champions in every sense. 📦 Cure Begins – Grove Bags & Glass Jars Once trimmed, the buds were tucked carefully into Grove Bags and glass jars, each stabilized at around 61% RH. The Grove Bags handle the microclimate beautifully, keeping humidity between 58–61%, perfect for preserving all that hard-earned quality. We’re now opening the jars daily, monitoring aroma and feel. This part of the process — the cure — is where the soul of the flower truly comes to life. ☀️ UV, Reds & The Perfect Run Part of what made this run so special was the precision in light spectrum. 40% whites, full reds, UV and IR, and the girls responded like royalty. The UV pushed trichome development to the max. The deep reds gave us thickness, color, and weight. All of it under ThinkGrow Model Ones powered through the Trolmaster ecosystem — everything syncing in harmony. This run was stable, lush, expressive — a grower’s dream. To my eyes, this was a perfect run. ⚖️ Final Yield: 1,302 Grams (1.3 kg) In a 4x4 tent — that’s just 1.2m x 1.2m for metric friends — we pulled in 1,302 grams of flower, not even counting the buds that were taken for filming, photos, or “quality control testing” along the way. 😉 Dense. Loud. Sticky. Resinous. 🌿 The Hidden Half: A Tribute to the Roots In every grow, there’s a part we don’t always see — a part that lives underground, quietly holding everything together. The roots. And this time, I wanted to honor them too. When we unpotted the plants after harvest, we were met with massive, dense root systems, completely filling the Autopot trays. These roots were vibrant, white and healthy, looking like noodles in a thick herbal soup — a true sign of vitality. The Autopots system, combined with the Aptus Holland Clean Program and Plagron Green Sensation, made sure they had the perfect environment to expand, absorb, and thrive. The PRO-MIX soil was the perfect foundation — light, fluffy, with excellent aeration. It all worked in harmony. After unpotting, I carefully washed every root system, removing all soil to prepare them for the next chapter of their story. Now, they’re hanging and drying — and will be left to cure for at least one month, possibly more, in a dry, dark, and well-ventilated space. But why keep the roots? Because cannabis roots hold ancient value — both medicinal and ritualistic. Though they don’t contain cannabinoids like THC or CBD, they are rich in alkaloids, triterpenoids, sterols, and other therapeutic compounds that can be anti-inflammatory, analgesic, antifungal, and calming. Medicinal Benefits of Cannabis Roots: • Friedelin – known for liver protection and anti-inflammatory effects • Pentacyclic triterpenoids – believed to support immune and anti-tumor functions • Alkaloids – some studies suggest pain-relief and muscle-soothing properties • High levels of fiber and tannins – excellent for digestive and skin applications 🍵 Root Medicine — Ways to Use Dried Roots: Once fully dried (they should snap like twigs, not bend), they can be gently crushed, powdered, or infused: 🌿 Cannabis Root Tea Soothing & Detoxifying • 1 tablespoon of dried, ground roots • 3 cups of filtered water • Simmer gently (do not boil) for 20–30 minutes • Add a bit of ginger or lemon for taste • Sip warm, especially good for menstrual discomfort, inflammation, and general relaxation 🍲 Healing Root Soup Base Brothy & Nourishing • Add a handful of dried roots into a veggie broth or bone broth • Simmer for 2+ hours • Strain before serving • This adds a subtle earthy tone and allows the healing properties to infuse your meal Topical Root Cream or Balm Great for sore muscles or irritated skin • Infuse roots in olive oil or coconut oil (low heat, 2–3 hours) • Strain and mix with beeswax to form a balm • Add essential oils like lavender or eucalyptus • Apply to temples, joints, or sore areas 🛁 Root Soak Bath Perfect for grounding and full-body relief • Bundle dried roots in muslin or cheesecloth • Steep in hot bathwater for 15 minutes before entering • Let the soak draw out toxins and ease tension ⸻ The roots are more than just the anchor of the plant. They are its memory, its foundation, its quiet miracle. By using them, we honor the entire lifecycle — nothing is wasted, and everything has a purpose. This part of the process is new for many growers, and I truly encourage anyone reading this to try saving and reusing the roots. Dry them, process them gently, and let them offer you one final gift. Much love to Aptus Holland, Plagron, Autopots, and PRO-MIX — this wouldn’t have been possible without their harmony working underground while the beauty bloomed above. 🌱 The Gift That Keeps Giving: Reusing the Soil As we say goodbye to one incredible season, we begin quietly preparing for the next. But not everything gets thrown away. In this garden, nothing is wasted. Just like the roots, the soil gets another life. After each harvest, I carefully remove the remaining roots and break up the soil. I inspect it, rejuvenate it with compost and beneficial microbes when needed, and most importantly, I repurpose it — giving it a second life in my outdoor veggie garden. Why do I do it? Because this soil has already done something extraordinary. It has supported life, held moisture, breathed air, balanced nutrients, and fed plants that became medicine. It’s not just dirt — it’s a living ecosystem. And to throw it away would be to ignore its potential. In my veggie garden, this recycled soil now nurtures cucumbers, tomatoes, courgettes, and so many other little miracles waiting to unfold. It’s a beautiful way of continuing the cycle, taking all the energy and intention that was once used to grow cannabis and transferring it into growing food. 🌞🍅🥒 🌾 The Benefits of Reusing Soil: • Sustainability — less waste, less environmental impact • Cost-effective — no need to constantly buy fresh medium • Soil memory — rich in organic material, microbial life, and structure • Nutrient potential — amended soil still holds value for many plants • A deeper connection — a way to honor the entire cycle of growth When we reuse our soil, we’re not just being resourceful — we’re believing in tomorrow. We’re trusting that what we’ve built can be rebuilt. That what has been used can become useful again. That from what seems like an ending, something new can always emerge. And maybe that’s the most powerful message of all in this journey: Planting is believing in tomorrow. 🌍🌱 Every seed in the ground is a little act of faith. So as this season comes to a close, the first tomatoes have been planted. The cucumbers are reaching for the sun. The courgettes are settling in. And the same soil that once gave us dense, resinous flowers is now feeding the vegetables that will grace the table. From harvest to hope — the cycle continues. And it’s beautiful. 🎉 The Final Touches Fun fact: • Trimmed on May 25 • Photo shoot on May 26 • This report: May 27 • Dry Bud Exclusive Photo Set: Coming soon Stay tuned — the next upload will be something special, just in time before the Eternity Grow Cup closes on May 31st. ⸻ 💚 Thank You To Zamnesia — your genetics were nothing short of extraordinary. To GrowDiaries, for hosting such a powerful space for community. To everyone following this journey, your support, love, and kind words fuel this project and keep the spirit alive. Let’s keep pushing boundaries, together. With roots deep in the earth and eyes on the stars — the next chapter begins soon. Much Growers love always, 🌱 Dog Doctor Official 🌱 Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol Master https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags

Hi everyone ! everything is ok, plants looks healthier now, ( Except tank on the right, but it's normal ) Buds are bigger days after days and the smell is awesome ( buds are more dense than my first try and some branch are bending now ^^ ) See you next week

Hello people... So heres the new strains COOKIES AND CREAM by SEEDSTOCKERS. New setup with Heavengrowlights 320w, lets see hoy they do. left a couple of timelapses for the germination process cheers feel free to coment

Everything is going great, I also think my plants have stopped stretching/growing, although really close to the lights. I am not seeing lightburn, is this is something should be concerned about? The leaf temp is about 75 degree under the light. Also just sticking with AN Bloom, Big Bud, Bud Candy. Should I be using B52? Also is overdrive worth it? it seems expensive for two weeks worth of work? One more question? Is superThrive bad in flowering? I read somewhere it could make bad things happen in flower because of the hormones it has. thus my question about B52.

Good day everyone! The most beautiful sunset in the world is the Blue Sherbert Sunset !!))) she's just huge! I did not expect such a size .. and I think I was a little late with switching to flowering .. it could have been earlier .. if I only knew that it grows so fast)) but it’s a sin to complain when your plants are so healthy and big)) I can’t wait for the flowering to start) she’ll just blow up her brain with flowers and beauty!)) I can’t wait! I no longer correct the branches .. now they are on their own, and only grow to the top .. I think to do defoliation after the beginning of flowering .. let's see ..

Week 3 (14-2 to 20-2) 14-2 Watering: Gorilla Kush#1: 114 ml. Gorilla Kush#2: 117 ml. 15-2 Watering: None. No pictures. 16-2 Watering: Gorilla Kush#1: 119 ml. Gorilla Kush#2: 121 ml. 17-2 Watering: None. 18-2 Watering: None. Today i will transplant the plants, i will mix 70% Coco coir with 30% Perlite. The plants go into 18L AutoPots. I use the Airdome combined with an airstone. I covered half of the airdome with coco, and the remaining half with clay pebbles. The rest of the 18L pot filled with the coco mix, and the plants. I gave both plants a 1.5L topfeed, and into the tent they go! The light is at 70% strength, with a distance of 60 cm. 19-2 Temperature: 25.7 degrees (lights on) 20.4 degrees (lights off) Humidity: 64% (highest) 45% (lowest) Watering: None. Light strength reduced to 60% 20-2 Temperature: 25.4 degrees (lights on) 20 degrees (lights off) Humidity: 64% (highest) 50% (lowest) Watering: None.

Just topped part of this beauties 🔥👌✌️ Put 2ml per l revive by Advanced nutrients I've noticed that helps girls to recover After transplant & topping This accually a week 3 of vegetation cuz i threat first 2-3 like seedling stage After germination stage😁😂🤪

Watch the VIDEO.

Just coming to the end of week 7 she’s had 8 days of flush an 24 hours of darkness an she’s been chopped just waiting on her to dry an cure abit before I smoke her an let everyone know how she smokes had fun growing this photo period as it’s my first also only 3rd ever plant I’ve grown taking that into account looking at the final result is uplifting to say at the least an has give me the motivation an carry on an push my new found passion further thanks everyone who helped me along answering questions love this friendly bud community!!!💚🍁

Week 3 Light settings 18/6 on at 6.00am off 0.00am Light power= 46% 109w Radiator settings LIghts on Turn on if temp drops below 21.4c Turn off if temp goes above 21.5c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19.1c Humidifier settings LIghts on Turn on if humidity drops below 59.9% Turn off if humidity goes above 60% LIghts off Turn on if humidity drops below 49.9% Turn off if humidity goes above 50% Extractor settings temperature 24c with 1c steps Humidity 62% with 2% steps Max speed 8 Min speed 1 VPD aim 0.5-0.9 Wednesday 8/2/23 Day 15 5.00pm Turn pots 90 deg Thursday 9/2/23 Day 16 8.30pm #3 Feed 1.5L Ec=1.06 Ph=6.4 Run 0.1L Ec=2.4 Ph=5.8 Moved #3 to centre #3 Height= 17CM Dist= 53CM DLI=22.6 Friday 10/2/23 Day 17 Did nothing #3 contemplated fiming Saturday 11/2/23 Day 18 8.00pm #3 moved to left and fim, should have 5 sets of nodes and then the fim part. #3 Height= 19CM Dist= 52CM DLI= 20.0 Extractor settings temperature 25c with 1c steps Humidity 62% with 2% steps Max speed 8 Min speed 1 Sunday 12/2/23 Day 19 4.30pm Leaf tuck all 3 #3 struggled to expose nodes. 8.30pm removed humidifier and moved pots nearer centre of the tent. A bit more leaf tucking. Monday 13/2/23 Day 20 7.30pm #3 Feed 2L Ec=1.04 Ph=6.5 Run 0.22L Ec=1.99 Ph=6.0 Tuesday 14/2/23 Day 21 #3 Height=24CM Dist=46CM DLI=23.5 Round up for the week. Again it's been a fairly productive week with the grow. Didn't quite hit my VPD target but I wasn't far from it. There is enough foliage that I managed to remove the humidifier from the tent. #3 Gorilla Cookies FF has come on great this week. Like the Tropicana Cookies she has shot up this week and has big leaves, because of this I also attempted to fim to slow her down a bit. Out of the 3 strains in the tent this one seems to have droopy leaves a good few hours before lights out, as if it's had enough for the day and gone to bed. I don't think it's got any issues but I'll keep a closer eye on this one. One more week of Veg I feel before 12/12. Power used for week Light (1.96+1.96+1.96+1.96+1.96+1.95+1.95)=13.7Kw Extractor (0.05+0.05+0.05+0.06+0.06+0.06+0.07)=0.4Kw Fans (0.31+0.30+0.30+0.30+0.3+0.31+0.39)=2.21Kw Humid (0.05+0.02+0.0+0.0+++)=0.07Kw Radiator (1.44+0.9+1.04+0.68+0.6+0.92+2.61)=8.19Kw Total for the week=24.57Kw Back in a week. Thanks for stopping by.