Processing
Likes
3
Share
@DBanned
Follow
They are looking good!!! We notice some yellowing on the bottom fan leaves, but we aren’t too worry about it. Water intake Lots of water!! It has been really hot. After gaia green feeding, we are just making sure the plants have water and not too dry. Thanks happy grow 🌱!!
Likes
83
Share
@Grey_Wolf
Follow
Chance Of A Lifetime Greenhouse seeds Wonder Pie Week six 12th June 2020 Welcome back , Well aprox 6 days have passed since I flipped the lighting schedule to 12/12 and they are starting to flower 👌 I was planning on vegging them longer but I decided that I didn't want to risk them stretching too much as they only have 70cm between them and the top of the tent . Never mind I am still happy with the way my tent is filling up with the three girls and another plant I already had running. Because I had already added enough Bio Grow to veg for an extra week or so , and the plants seem to be growing just fine with water I will not add the Bio Bloom until the end of Next week . I am due to feed them with the enhancer again so I think that should see them thru the initial stretch and flowering nicely 👍 During this week I had to do a few alterations to the plants using LST and soft wire. My main aim is to keep training each plant so that it fills in as much of the area around it as possible thus not wasting any room if possible . Because I am using a living soil mix I occasionly need to "feed" it too , but incase I was breaking any rules regarding the competition I wanted to clarify whether worm castings and worm tea made with molasses was allowed. Luckily I was informed recently that Yes it is ok so some time next week I will also add some fresh worm tea and a handful of castings to each plant. I am super impressed with the uniformity of this strain as all three of mine look almost identical to a lot of the other Wonder pie diaries I have been following, this means that the strain is homozygous and will no doubt produce a similiar result each time it is grown. Kudo's to Arjan and his team @Greenhouseseedco Well that is about all for this weeks update , please leave a like & Thankyou for stopping by 👍
Likes
5
Share
This plant seems to have grown much denser and better than my first plant. I just got the ac infinity ventilation setup with controller 69 for my 2x2, still trying to learn, hopefully grow #3 goes even better. Stay tuned
Likes
31
Share
@Targona
Follow
8/28/2022 - 21 days since my little girl sprouted from seeds🌱 The third week of vegetation of my BCN Power Plant 🌴🌴🌻 Nutrients: Jungle Indabox - I had to adjust the dosage, after the first dose of nutrients, the lower leaves of the plant lightened a bit, this was especially visible on her sister Orange Sherbet Auto, which burned the tips of the lower leaves - after this week I reduced the dose by half 🍃🍃 Hesi: Hesi Root Complex I give this root stimulator for root support, although Jungle Indabox also supports root growth, namely: Jungle Urban A - (N-P-K) - (2-1-6) Everything for healthy growth and formation of the root system Atami - ATA Calmag - I missed completely Advanced Nutrients - Bud Candy - I also adjusted the dosage by half 🍬🍬 Preflowering: Classic white hairs have not yet appeared on the stem, indicating the female gender 👩‍🌾👧🏼 Light: Mars Hydro TS1000 - really great lamp with sufficient lighting and energy-friendly 💡💡 Training: Topping: I usually top in the third week of the plant's life, just like this time. However, now the girls are very advanced in growth, so they will have more main branches 🌴🌴 LST: Two days after topping, I anchored the lowest branches to the ground with metal clips, tied the higher branches with a string towards the edges of the flower pot, so that the light would shine on each of them 💡💡 Defoliation: In the next two days, I cut off all the large leaves that were shading the branches 🌞🌞 The girl is no longer a child, she is a strong young lady, full of branches and leaves. Its color has also changed, it is now deep green again. The stem is rough, so I assume a strong root system 🌲🌴🌾 Thanks for the likes and you can follow me on Twitter 🐦: @ Targona666 See you soon 😍
Likes
6
Share
@Dengued
Follow
Day 56....buds developing nicely....laid off any nutrients for the last week and considering just one more spirulina feeding, then just well-water for the rest of the grow, with no flush....pollution/haze levels high which might effect the plants
Likes
17
Share
@JonnyKush
Follow
hey growmies I decided to switch to flowering, I am using ADV nutes with the dosage recommended by them and they seem to me in great shape, tonight I will do a defoliation in order to breathe better and get as much light as possible. I'll keep you up-to-date. good growth and happy day 💚🌳
Likes
20
Share
Exciting first few days setting up everything in and around the propagator. I think I'll start counting the vegging days when the seedlings are 7-10 days old.
Likes
42
Share
the girls are doing very well🌱, they like their diet, and they are gaining weight well💪 ... we are at the beginning of the sixth week of flowering🌻 and going for the highs👊now I am waiting to see the frost arrive on these girls day 40 of bloom🌻 things are going perfectly, the girls 🌱are gaining weight just the way we like it .... I intend for the first time to use Ripen della Ghe to force the end of the cycle👨‍🍳, since I am left with the empty cans in a bit of a hurry. I think I will open a question for advice from those who have already used the Final phase of the Ghe .... good growth everyone!👨‍🌾 see you next time my friends ...💚
Likes
42
Share
@Shooey
Follow
Amnesia is really starting to fire 🔥, buds are lining the branches nicely, in particular the 2 crowns where she was tipped early on. The weather has really eased off heat wise, in fact it has changed a bit too quickly, and I kind of hope for a few more warm sunny days now. Amnesia takes heaps of feeding and loves it for the most part. No sign of burn, but I have one bud that seems to have a lime yellow outbreak on top. I’m not too worried because it’s only on one bud, and it’s going away a bit now, but it’s weird and I wonder if you guys have seen this before @grey_wolf or @Med_in_Tropic?? Maybe she got the corona!! 🍻
Likes
567
Share
It's been 31 days of flower now and The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Lots of unexpected colors coming out now. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍  
Likes
14
Share
Всех тепло приветствую. Начинаем свой репортаж, погнали! 17 добрых автоцветов от компании Errors Seeds. Южный Урал, теплица. Обо всем подробнее в следующих постах!🤟 Начинаем как всегда, с семян) Они отправились в ватные диски на прорастание, далее переедут в торф-таблетки под лампу APOLLO 6. Переезд в теплицу будет осуществляется в нашей готовности, в готовности самой собственно теплицы и САМОЕ важное, когда будет готова рассада🌱
Likes
24
Share
@Hawkbo
Follow
Lookin good, no more herms so far as I’ve tightened things up hopefully that’s the last of them for good. I installed a 4Inch AC infinity fan and filter as an intake so I have been able to close all of the vents. At this point the leaf strip has proven to be a solid method, I have nothing to compare bud size at this point but just the extra space it opened up is a plus. I’m sure the lowers will be a little more firm and the plants obviously haven’t had to be fed as often as usual so its saving time, water and nutrients. The added microbes have also allowed me to keep my ppm around 1000 instead of 1080ish without any sign of deficiencies. The Mandarin cookies x Dionysus has a little cal-mag issue but that was a trait from the mother which out of 10+ grows all had a cal-mag deficency. REMEMBER , IF YOUR SHOPPING FOR GEAR YOU CAN USE THE CODE “BANGDANG” FOR 10% OFF YOUR ENTIRE PURCHASE FROM ANY OF THE FOLLOWING COMPANIES. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led *****Gorilla grow tent discounts extend to all companies affiliated with grow strong industries which include..***** @super.closet Lotus Nutrients Kind LED grow lights
Likes
21
Share
@BLAZED
Follow
Week 17 (23-6 t/m 29-6) 23-6 Temperatuur: 31.2 graden (licht aan) 23.2 graden (licht uit) Luchtvochtigheid: 71% (hoogste) 53% (laagste) Dit is de laatste week bloei, dus geef ik geen voeding meer. Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 24-6 Temperatuur: 31.5 graden (licht aan) 24.2 graden (licht uit) Luchtvochtigheid: 67% (hoogste) 50% (laagste) Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 25-6 Temperatuur: 32.9 graden (licht aan) 25.2 graden (licht uit) Luchtvochtigheid: 72% (hoogste) 47% (laagste) Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 26-6 Temperatuur: 33.5 graden (licht aan) 23.1 graden (licht uit) Luchtvochtigheid: 68% (hoogste) 48% (laagste) Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 27-6 Temperatuur: 31.2 graden (licht aan) 21.7 graden (licht uit) Luchtvochtigheid: 61% (hoogste) 47% (laagste) Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 28-6 Temperatuur: 30.1 graden (licht aan) 22.4 graden (licht uit) Luchtvochtigheid: 75% (hoogste) 47% (laagste) Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4 29-6 Temperatuur: 31.4 graden (licht aan) 23.7 graden (licht uit) Luchtvochtigheid: 75% (hoogste) 53% (laagste) Yes! Ze kan geoogst worden! Watergift: (Flush) 1100 ml EC: 0.0 PH: 6.4
Likes
37
Share
@Aedaone
Follow
The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Day 1 we had high temperatures of 79° and skies were mostly cloudy. The lows at night have begun to drop below 60°F. It has been extremely humid with tons of dew in the morning. I'll continue to defoliate and spray with biofungicide to get this powdery mildew under control. Day 2 we had early morning rain followed by mostly cloudy skies. High temperature was 77. The rain took care of the watering today. I'm treating with arber again and more defoliation. Day 3 we had a high temperature of 81°F, skies were partly cloudy, and I watered 3-4 gallons from the hose. Day 4 we had a high temperature of 83° with sunny skies. I watered 4-5 gallons from the well. I treated with Arber. Day 5 we had a high temperature of 88°F. Skies were clear and sunny. The humidity was around 90% today. I watered 4-5 gallons from the well. I finally got most of the infected leaves off and have one more plant to do tomorrow. I treated with Arber again today. Day 6 we had high temperature of 89°F. Skies were sunny. I watered about 4-5 gallons with well water. I've been treating these with Arber biofungicide but it's hasn't had much affect. I stripped all the infected leaves and lollipoped two today. I'll get the third tomorrow. I'll treat these tomorrow with growers ally fungicide and see if they can be saved. Day 7 we had a high temperature of 86°F with partly cloudy skies. We're expecting rain tonight and it's super humid today. The weather is not cooperating while I'm treating for powdery mildew. This week was a success. The plants gained on average 6 inches in height. They've slowed down their upward growth and are transitioning into flower. The weather has been atrocious for cannabis. These girls are super healthy but the humidity and cool nights have caused perfect conditions for powdery mildew. I began treatment with Arber biofungicide, but it wasn't doing much. I lollipoped and defolated heavy on two of the plant and finished the third after photos on day 7. The non infected leaves are responding ok to the Arber. I'm switching now and will treat late day 7 with Growers Ally fungicide. I defolated pretty heavy, but I expect a full recovery and increased production as there will be more light penetration.
Likes
29
Share
8°settimana...gli do ancora 2 settimane di solo acqua,con un pochino di melassa,così la addolcisco un po'...ma sicuramente già sono super dolci al raccolto....... Mah! Guardando le mi sa che una ultima settimana di flush andrà più che bene... Faccio l'ultima settimana, dandogli solo flawless Finish e via.......dopo sarà prontissima,😋🤤😜
Likes
17
Share
Processing
Likes
3
Share
@Kushizlez
Follow
Day 49-56 (Day 1F-5F) (Day 50) Plants are all showing some odd deficiencies and lord only knows what I’m doing wrong this time. I’m guessing I overwatered as I’m seeing a N/mg deficiency. Slurricane is showing some super odd browning and crisping on the lower fan leaves. I have to flip into flower tomorrow (April 21st) as my other tent is at maximum capacity now. Plants look like shit but I have no other choice. Normally I would never do that so close to being flipped. Hopefully this will at least be worth the electricity used. (Day 1F) Switched out timers and flipped. I forgot to put my temperature controllers on the outside of the tent. I will do that ASAP as I don’t want to risk light leaks. (Day 2F) Everything is looking a little better. Ive been noticing that while my A/C is running, I don’t have full power to my light because the ballast is automatically dimming the light. I didn’t run the A/C today and the plants seem to have responded well but correlation doesn’t equal causation. (Day 3F) I decided to toss all the locos except one. I also tossed bg#1 as it shit the bed out of nowhere. Hopefully that will clear up some room in the tent for these others to start thriving. (Day 5F) Plants all responded well to the extra light. Maybe that was a big part of the problem in the first place. I had 17 plants under a 400w. I’m still only running 400w because 600w gets way too hot unless I have my carbon filter running 24/7 which I’m actually starting to consider.