Recommended
Likes
Comments
Share
@DESER90
Follow
The plants are not fully in the same stage, but most started getting milky trichomes so I decided to flush. Roughly 3-4 times the usual amount of water. Ph to 6.2 and a lot of run off water. Never experienced with flushing so here goes nothing. I will try and cut all the plants at the same time. The trichome development will be at different stages but this might be a good way to see what trichome stage I like most, and I will be able to decide better in future grows. To be honest I'm not looking for highest possible THC content ;) Taste/smell are priority.
Processing
Likes
29
Share
@CANNASIM
Follow
—SETUP— .BOSSLED LED 1800W full spectrum, real power consumption is +-250W. .Grow space 60X100X200(a simple shower box. .AN nutes and other simple additives. .Grow medium is 60% peat, 30% perlite, 10% organic correction(worm castings), 5 gallon fabric pots(18l). —BRIEF— Hi there, I have tried already done this genetic outdoors, in poor lighting and a general purpose nute from Neudorff, yielded 25g dry, in 3gallon pots same medium. So this is a good experiment, lets see indoors how she will compare. —GERMINATION— My germination process always start by scarifying the seeds, i created a little tool for that. I just a little container with sandpaper walls. Shake gently for about 60 secs+, this allows for the water to penetrate better in the seed shell, once you soak. Then i soak overnight from 12 to 20 hours max. From there i either plant straight or use the paper towel method to see the tap root before. If you are a bit on the impatient side seen the tap root is advisable so you see some movement before planting. Lol! —ROYAL QUEEN SEEDS . QUICK ONE . INFO — Chose this strain because is basic and I have to travel for a month soon, and someone else is going to take care for this time. :) Quick One is a fast-growing autoflowering strain. This was one of the first autoflowering strains developed. When it was first released, it was one of the quickest growing strains on the planet. THC: 13% CBD: Low Yield Indoor : 275 - 325 gr/m2 Yield Outdoor: 100 - 150 gr/plant Height Indoor: 50 - 60 cm Height Outdoor: 60 - 100 cm Flowering: 5 - 6 Weeks Harvest month: 8-9 weeks after sprouting Genetic Background: Strong Indica x Ruderalis Type: Sa 10% In 60% Ru 30% Effect: Physical Climate: Mild —RQS QUICK ONE GERMINATION UPDATE— My mood said to me to plant straight, so scarify > soak 18 hours +- > plant straight. Seedlings look a bit odd, with a yellow center, let's give her some days in and see what happens next.
Likes
6
Share
@Tezza2
Follow
The purple lemonade is getting some beautiful sticky fat dank buds and the gorilla cookies is flowering nicely the node spacing is super close so i will be looking at some super dence fat sticky buds the smell is amazing i cant wait to have a joint with the two strains combined in it .
Likes
27
Share
@Theia
Follow
Great progress with not much to report. All my plants this grow I trained to be tall instead of my normal method where I like to spread a plant to the width of my space. About 80cm across.. I thought this time if I trained them tall and thin I could fit 2 side by side. But as I am chicken I decided to do the kush as I normally would so she is a lot wider and not as tall. She is beautiful and I love this strain so far. Fat leaves early in veg to power her stretch and then a more slim leaf like a sativa in flower. This works great as it's letting loads of light through to her lowers Feeds are going in at 1.8 to 1.9ec she's loving it and I think could take a bit more.. but as I said earlier I'm a chicken and she is doing so well...😜 Sorry about the poor video I have 4 plants that are over a meter tall all squashed behind me so I could barley move..😔 Thanks for looking. Grow well 🌿💚🌿🙏🏼
Likes
23
Share
MATARO BLUE by KANNABIA Week #8 Overall Week #7 Veg This week she's doing good no issues it got hot but she didn't falter stayed growing. She not that bushy but she's a sturdy looking plant. Stay Growing!! Kannabia.com. MATARO BLUE
Likes
14
Share
Girls are stretching so are basically transitioning into flower. Still healthy and impressed at the growth rate. Last foliar feeds given as pistils will start developing. Stay tuned
Likes
73
Share
@Peggers
Follow
No issues all week steady away I might have underwatered slightly this week partly because it's been so hot! Only noticed when I hand my hands in the media for a check. Had a nice rinse with some bioenhancer. Measured the plant at its highest point 30cm but its measuring at 60cm wide and its now just a waiting game till we achieve a little height. Still not defoliated anything at all yet but looking at it if I'm to keep an even ish canopy I might want to look at it. Tho it grows very strangely. It's like it will grow a little bit here and then the next day a little bit there so it's forever looking abit lobsided middle is due for its turn tomorrow tho. I've tried to control it by spinning the plant thinking it might be down to the air circulation but it appears it's not that.
Likes
119
Share
Ahoy, green comrades and Power Buds enthusiasts! Gather 'round for the Week 5 Veg Report, where the saga of Jelousy continues to unfold in all its leafy glory. This week has been nothing short of spectacular, filled with growth, joy, and a touch of botanical magic. Now, brace yourselves for the root revelation – it was a week of root madness! Jelousy's roots decided to throw a green party of their own, growing with such vigor and enthusiasm that I couldn't resist but give her a grand ticket to her final pot. Yes, folks, the time has come for our green companion to settle into her permanent botanical abode. Let's talk about the grand ceremony – the transplantation. As always, I employed the mystical Aptus Holland Mycor Mix to accompany Jelousy on her journey. This mix isn't just a sprinkle of magic; it's a symphony of beneficial microorganisms, working in harmony with the plant. During transplanting, the mycorrhizal fungi in the mix establish a connection with Jelousy's roots, creating a dynamic partnership. They extend the root system, enhancing nutrient and water absorption, while Jelousy graciously provides them with sugars. It's like setting up a botanical support system, ensuring our green companion has everything she needs to flourish in her new and final home. Now, let's talk about a little gardening finesse – defoliation. As Jelousy reached for the skies, I decided to give her a little grooming session. Removing some of the older, lower leaves not only allows for better light penetration but also encourages the plant to focus its energy on the growing tips. It's like giving our green friend a botanical spa day, where she can channel her energy into the areas that truly matter. But wait, there's more! I couldn't resist taking a few clones. It's like preserving a piece of Jelousy's green magic for the future. Who knows, maybe we'll have a whole family of Jelousies thriving in the garden. And speaking of the garden, we've welcomed a new member – a little Buddha acting as the guardian of our growing oasis. He stands tall, radiating tranquility and showering blessings upon our flourishing green kingdom. He seems to be particularly fond of the tree growing beside him – our very own Jelousy. It's like having a silent guardian, watching over the botanical wonders unfolding. As we revel in the beauty of Week 5, let's extend our gratitude to Zamnesia and Plagron for guiding us through this enchanting journey. Their support is the wind beneath our leaves, propelling us toward horticultural greatness. A nod of appreciation to the vibrant Grow Diaries community – your shared passion and wisdom continue to enrich our collective knowledge. To my fellow contestants and growers, may your plants continue to thrive, and may the joy of cultivation accompany you through every green endeavor. Here's to a week of roots finding their home, leaves reaching for the heavens, and the garden flourishing under the watchful eye of our Buddha guardian. Stay green, stay inspired, and keep cultivating those dreams! As always, thank you all for stopping by, for the love and for it all. This journey of mine would just not be the same without you guys. The love and support are very much appreciated, and I feel honored and blessed with you all in my life !!! With true love comes happiness. Always believe in yourself and always do things expecting nothing in return, with an open heart. Be a giver, and the universe will respond in ways you can’t even dream of . Friendly reminder: all you see here is pure research and for educational purposes only. Genetics - Jelousy @Zamnesia Nutrients @Plagron Light - @viparspectra P2000 Room size - 3x3 - 0,9x0,9
Likes
7
Share
@Epwood
Follow
The holiday season got away from me a bit and prevented me from getting an update in on Monday but the plants are _really_ taking off. There are now visible bud sites and plenty of them. *Full Disclosure*: I've significantly upgraded my light in my flower tent from a Spider Farmer SF-2000 to a Spider Farmer SF-4000 and, as such, I'll likely see my yield take off quite a bit this grow. It's certainly having an impact on the heat in the tent and, subsequently, the amount of time the in-line fan is running; that being said, the plants appear to be responding quite well! The last two grows I've run have fallen off hard (complete and total yellowing/chlorosis and drying out regardless of consistent watering/light/nutes/pH) around week five of flower and, with that in mind, I'm trying to keep this grow as simple as possible. I'm purposely using no advanced grow techniques where I'd usually top, LST, and HST. The only "advanced" technique I'm using is a bit of defoliation but this is mainly just to avoid some of the dense bottom growth that tends to decrease air flow, increase humidity, and take away from more rewarding top-growth. This week, along with replenishing nutrients, I've fully emptied out and cleaned my reservoir. While doing so, I noticed a fair amount of red-ish algae growth which I'll likely address with more consistent cleaning of the reservoir and some sort of additive (I'd welcome any suggestions and dosage if you've got any suggestions). All in all, great progress.
Likes
2
Share
@4F1M6
Follow
Shes booming through the stretch! Got branches rowing up great as she fills right out. Did a big defoliating of most the leaves under the first net. Allow some air flow through the under skirt. Did a preventative treatment using dr zhymes. Than gave her a good shower to wash off any residual build up. I'm just starting to see pre flowers coming in at the nodes. So she will still have some stretching period to go. I'd say atleast another week of stretching out and filling up my net. Before I start seeing those white stigma pom poms coming in at the bud sites. Lets see what this lady can do. Until next update. Happy growing and stay lit fam.
Processing
Likes
6
Share
@dyrachok
Follow
Продовжую вести репост і тримати свою крихітку на ріпені. Деякі незрозумілі проблеми з листям, але якщо вірити мудрецям з цього сайту - це через високу температуру, яка останні дні була аномально високою. Опустив горщік нижче, долив води у мій "зволожувач" повітря, сподіваюсь це хоч трошки допоможе. Квіти здаються не дуже плотними, і скоріш за все це тільки моя провина( Але рано про це говорити, вирок буде після повноцінної дегустації стиглих квіточок😋 Тріхоми майже усі мутні, трошки є янтарних. Даю ріпен завтра 04.09 останній раз, далі тільки вода, і харвест. Планую провести харвест на 10 тижні.
Likes
17
Share
In a 1m x 1m tent, Lumii 315w , (using marshydro SP150 in flower stage), secret Jardin fan, carbon filter, intake fan 5”, humidifier. So out of the four seeds popped last week three where successful in rooting. Added a sprinkle of great white shark to help with root stimulation and just water. Root are starting to show on the side of the cup so almost time to transplant to bigger pots (moving into fabric pots) Transplanted in to fabric 20l pots with feeding powder at a low dosage. But unfortunately one transplant didn’t go to plan and part of the tap root snapped (but not going to give up on her yet) 1L of water in cups 4L of water in fabric pots 20L 33g bio grow
Likes
2
Share
@Luke_Lee
Follow
-06.04.2025 Today is the day. After a thorough examination of the trichomes, I decided to harvest the two Blueberry Automatics. After a total of eleven weeks. The wet weight of the flowers of Blueberry#1 = 77 grams, Blueberry#2 = 74 grams. The flowers are now hung out to dry and will be weighed again in 7days. -11.04.2025 After 6 days the Blueberry Automatics are dry. The branches broke directly when bent with a nice cracking sound. The dry weight of both plants together is 34g. The flowers were stored in jars for curing with a humidity packet from IntegraTM and a hydrometer. Total Time: 1879,36h Total Energy: 326,30kWh 1kWh: 0,30€ Energy Cost total: 97,89€ 💚
Likes
11
Share
@Kirsten
Follow
☆♡ Gorilla Cookies: I've noticed a leaf fell off the bottom. I think I may've overdone the nutes. She's growing tremendously. I top dressed with the below, as the rest of my plants. I will only use PH'd water for the next several waterings, probably with Biosys or seaweed. ♡☆ 16.2.25: I decided to check out the lower canopies of all plants to see if I need to get rid of any foliage. I did get rid of a few small branches and leaves. However, whilst I was doing this, I saw more garden pegs from my LST remaining. There were about 6 or more in Pink Mist alone. Additionally, on Watermelon, there were some left in, too. I'm so annoyed to see that because the plants are really stretching, and I could've potentially disrupted this by leaving the pegs in for all this time without realising it. 🤞 that I haven't compromised things too much. We'll see. I watered today with 2ltrs of dechlorinated water PH'd to 6.3 containing the following nutrients; ♡ .8g Green Leaf Nutrients PK booster ♡ .5g Ecothrive Biosys I ordered quite a few things for the garden. I got Greenleaf Nutrients Sea K(elp) and Mega Crop Parts A+B. To go with their PK Booster I got last month. I'm excited to try it all together. Next run, maybe just using these. We'll see how it goes. 18.2.25: The plants are going crazy for water! Everything is getting used right up so fast! Today, I decided to add some more Black Strap Molasses to add some carbs and other micronutrients. I'll add the jar with the label in the photos section above. I watered a very small amount to each plant. What I put in: ♡ Black strap molasses 150g ♡ 2g Sea K(elp) Greenleaf nutrients. I dissolved everything in 4ltrs of dechlorinated water PH'd to 6.4. 19.2.25: I received the majority of the garden purchases that I made. I'm still waiting for the Ecothrive Life Cycle. I wanted to top dress, but it's been delayed unfortunately. I am using my Greenleaf nutrients products which I bought on Amazon. I got the Mega Crop 2 part system Part A and Part B. I have the Sea K(elp), and the bud explosion PK booster. I really wanted to get some of their sweet candy asking read many positive reviews. Unfortunately, for me, this is unavailable to buy currently. So that's a little disappointing. I needed to do a good watering so when my nutes were delivered today, I got excited 🤗 I watered 2ltrs of dechlorinated water per plant, PH'd to 6.4, containing the following nutrients: ♡ 1g Mega Crop Part A ♡ 1g Mega Crop Part B ♡ .5g Sea K(elp). The plants drank this up within a few hours. I'm going to try and hold off on watering in hopes that my Ecothrive Life Cycle will arrive so I can top dress and water it in then. 20.2.25: My Ecothrive Life Cycle arrived yesterday, and the plants are ready for their top dress and a good watering in. I have some Biobizz Light Mix, Canna Coco,and perlite. I'm going to use this as a base to mix my amendments in. I'm going to fill my 5 gallon bucket with about 4.5 gallons of my top dress mix. I will distribute this across 6, 4-5 gallon pots. Then I will water in well with Greenleaf nutrients Mega Crop Parts A+B and Sea K(elp). I've made a crude attempt to video mixing my top dress. Don't listen to the audio. lol, my YouTube didn't stop playing whilst I recorded this 😂 So anyway, I added the following amendments to the above base mix of 4.5 gallons; ♡ 3 TBSP Ecothrive Life Cycle ♡ 3 TBSP Vitalink Bat Guano ♡ 3 TBSP Ecothrive Charge ♡ 1 TBSP RHS Mycorrhizal Fungi granules ♡ 6 TBSP Ground Cinnamon.
Processing
Likes
23
Share
@Jwjoh
Follow
EXPERIMENT: Still waiting on the teapot to boil the water properly, but the photos and video of the "still" attached to this diary shows proof of concept. The sludge coming out is from the copper tubing manufacturing process, it'll eventually stop. I need to get the real setup built and run a couple gallons through the tube. Plant B is coming along nicely! I have a feeling it's going to finish around week 6 rather than the full 8 week period advertised. So I've started the flushing process. I can always add nutrients if necessary. Flushed twice this week with 2.5 gal of pH-adjusted distilled water. Plant A doesn't seem to like the bud blaster. I think it'll finish around the 8 weeks advertised. I flushed all week same as plant B, though I will probably add more nutrients to A next week. It just seemed to be getting some nutrient burn so I wanted to back off.
Processing
Likes
18
Share
Even though the temperatures have gone extremely to high for my liking this plant seems to love it. She’s a very resilient plant I highly recommend tho she strain to everyone. After I clear out my flowering tent I will put this bad baby into flower.
Likes
6
Share
Ok this week was a little exciting one of the plants developed an issue with one of its leaves. It's the only plant out of all of them it's hard to see from the picture but 2 out of the 5 fingers on the leaf had a burn and were shrivelled and also very very shiny. I looked it up and it suggested it was boron deficiency. I simply removed the affected areas and carried on as it was only localized too a couple of leaves and just on that one plant. The smaller plants are catching up now